Age | Commit message (Collapse) | Author |
|
|
|
|
|
Corrects incorrect usage of contraction for 'it is', when possessive 'its' was required.
Differential Revision: https://developer.blender.org/D9250
Reviewed by Campbell Barton
|
|
update stroke on initial side
Issue introduced in rB4f616c93f7cb.
Issue here is that the the `StrokeCache` `mirror_symmetry_pass` is still
in its previous state when entering
`wpaint_do_symmetrical_brush_actions`.
For the initial stroke this means that the (wrong) cache
`mirror_symmetry_pass` ends up in SculptBrushTest `mirror_symmetry_pass`
as well and thus the clipping test in `sculpt_brush_test_clipping` will
fail.
[ This one flips the coords to test against clipping according to (now
wrong) `mirror_symmetry_pass` ]
Solution seems simple: just ensure we start of with a
`mirror_symmetry_pass` of zero in `wpaint_do_symmetrical_brush_actions`
for the initial stroke.
Same thing is done for vertex paint as well.
Maniphest Tasks: T81484
Differential Revision: https://developer.blender.org/D9268
|
|
In that case, weightpainting would still be done threaded, but current
mirroring code cannot be run in parallel.
Caused by rB5502517c3c12 [which was checking mesh 'flag', needs to be
'editflag' -- thus test was always true].
Reviewers: pablodp606
Maniphest Tasks: T81461
Differential Revision: https://developer.blender.org/D9126
|
|
Cleanup old tracker task format to the new. e.g: [#34039] to T34039
Ref D8718
|
|
Mainly use false/true for bool, but also a few others.
No change in behavior expected.
|
|
This adds XYZ symmetry as a property of meshes and updates all modes to
use the mesh symmetry by default to have a consistent tool behavior
between all modes and when switching objects.
Reviewed By: brecht, mano-wii, campbellbarton
Maniphest Tasks: T79785
Differential Revision: https://developer.blender.org/D8587
|
|
Some underlying functionality was not ready for greasepencil:
- BKE_modifiers_get_virtual_modifierlist (now introduce dedicated BKE_gpencil_modifiers_get_virtual_modifierlist)
- BKE_modifiers_is_deformed_by_armature
- checks in drawing code
- checks in (pose) selection code
A couple of changes to make this work:
- `eGpencilModifierType_Armature` has to be respected (not only `eModifierType_Armature`)
- `OB_MODE_WEIGHT_GPENCIL` has to be respected (not only `OB_MODE_WEIGHT_PAINT`) -- (now use new `OB_MODE_ALL_WEIGHT_PAINT`)
- `gpencil_weightmode_toggle_exec` now shares functionality from `wpaint_mode_toggle_exec` -- moved to new `ED_object_posemode_set_for_weight_paint`
This patch will also set the context member "weight_paint_object" for greasepencil (otherwise some appropriate pose operators wont work when in weightpaint mode)
Reviewed By: campbellbarton
Maniphest Tasks: T63125
Differential Revision: https://developer.blender.org/D8483
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/sculpt_paint` module.
No functional changes.
|
|
|
|
Threaded Sculpt is now always enabled by default. If it causes
performance problems compared single threaded sculpt it should be
considered a bug.
Reviewed By: sergey
Maniphest Tasks: T77638
Differential Revision: https://developer.blender.org/D7960
|
|
Sculpt Vertex Colors is a painting system that runs inside sculpt mode, reusing all its tools and optimizations. This provides much better performance, easier to maintain code and more advanced features (new brush engine, filters, symmetry options, masks and face sets compatibility...). This is also the initial step for future features like vertex painting in Multires and brushes that can sculpt and paint at the same time.
This commit includes:
- SCULPT_UNDO_COLOR for undo support in sculpt mode
- SCULPT_UPDATE_COLOR and PBVH flags and rendering
- Sculpt Color API functions
- Sculpt capability for sculpt tools (only enabled in the Paint Brush for now)
- Rendering support in workbench (default to Sculpt Vertex Colors except in Vertex Paint)
- Conversion operator between MPropCol (Sculpt Vertex Colors) and MLoopCol (Vertex Paint)
- Remesher reprojection in the Voxel Remehser
- Paint Brush and Smear Brush with color smoothing in alt-smooth mode
- Parameters for the new brush engine (density, opacity, flow, wet paint mixing, tip scale) implemented in Sculpt Vertex Colors
- Color Filter
- Color picker (uses S shortcut, replaces smooth)
- Color selector in the top bar
Reviewed By: brecht
Maniphest Tasks: T72866
Differential Revision: https://developer.blender.org/D5975
|
|
Mix up with imapaint.paintcursor & imapaint.paint.paint_cursor
Remove imapaint.paintcursor since it wasn't used.
Also rename paint_cursor_start_explicit() to paint_cursor_start(),
removing the existing paint_cursor_start() since it took the paint
struct from the context, a value that's known by all callers.
|
|
This caused an additional argument when exiting object modes
and many other low level functions which don't need to access context.
This simplifies fixing T77073.
|
|
|
|
|
|
Changing between modes would always add a user visible undo step
that set object mode.
Avoid storing this extra undo step on object mode switching.
|
|
|
|
This patch enables TBB as the default task scheduler. TBB stands for Threading Building Blocks and is developed by Intel. The library contains several threading patters. This patch maps blenders BLI_task_* function to their counterpart. After this patch we can add more patterns. A promising one is TBB:graph that can be used for depsgraph, draw manager and compositor.
Performance changes depends on the actual hardware. It was tested on different hardwares from laptops to workstations and we didn't detected any downgrade of the performance.
* Linux Xeon E5-2699 v4 got FPS boost from 12 to 17 using Spring's 04_010_A.anim.blend.
* AMD Ryzen Threadripper 2990WX 32-Core Animation playback goes from 9.5-10.5 FPS to 13.0-14.0 FPS on Agent 327 , 10_03_B.anim.blend.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D7475
|
|
Follow up of b2ee1770d4c3 and 10c2254d412d, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
Spatial & topology mirror table each used a single function
taking a char as an identifier.
Split these into begin/end/lookup functions.
|
|
|
|
This check box alters how weights are displayed and painted,
similar to Multi Paint, but in a different way. Specifically,
weights are presented as if all locked vertex groups were
deleted, and the remaining deform groups normalized.
The new feature is intended for use when balancing weights within
a group of bones while all others are locked. Enabling the option
presents weight as if the locked bones didn't exist, and their
weight was proportionally redistributed to the editable bones.
Conversely, the Multi-Paint feature allows balancing a group of
bones as a whole against all unselected bones, while ignoring
weight distribution within the selected group.
This mode also allows temporarily viewing non-normalized weights
as if they were normalized, without actually changing the values.
Differential Revision: https://developer.blender.org/D3837
|
|
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
|
|
|
|
- Use 'BKE_object_defgroup' prefix for object functions.
- Rename 'defvert_verify_index' to 'defvert_ensure_index'
since this adds the group if it isn't found.
|
|
|
|
Addresses T74331
|
|
This would happen when done from editmode, on a mesh with any modifier,
after adding/removing geometry in editmode.
Similar to rBba0870713b9b (which did this for weightpaint and sculpt
already), ensure an evaluated depsgraph, otherwise
'runtime.mesh_deform_eval' would not be up to date causing problems
later.
Maniphest Tasks: T72028
Differential Revision: https://developer.blender.org/D7011
|
|
This is in preparation of new object types. This only changes mesh_eval, we
may do the same for mesh_deform_eval and other areas in the future if there is
a need for it.
This previously caused a bug in T74283, that should be fixed now.
Differential Revision: https://developer.blender.org/D6695
|
|
than mesh"
This reverts commit f2b95b9eae2ee913c99cff7595527b18d8b49d0a.
Fix T74283: modifier display lost when moving object in edit mode.
The cause is not immediately obvious so better to revert and look at this
carefully.
|
|
This is in preparation of new object types. This only changes mesh_eval, we
may do the same for mesh_deform_eval and other areas in the future if there is
a need for it.
Differential Revision: https://developer.blender.org/D6695
|
|
The 2D paint cursor in the 3D view does not support scene radius in
weight and vertex paint mode. This was also the case in 2.80 with the
old cursor. The option to change the units from view to scene is not
available in the UI in those modes, so I think it makes sense to remove
the support from the code.
The ideal solution could be supporting the new cursor in all paint
modes, but that is going to take more time and it is going to be
problematic in texture paint. After doing this, we can bring this code
back and add the option to change the units to the UI.
Reviewed By: jbakker
Maniphest Tasks: T73080
Differential Revision: https://developer.blender.org/D6586
|
|
Caused by 14acac0bb7f3
|
|
The relation between the pressure/size and the pressure/alpha is a
fundamental property that defines the behavior of a brush, so it does
not make sense to have it unified across all brushes. This applies both
for sculpting and painting.
Some of the new 2.82 brushes need pressure/size or pressure/alpha to be
enabled to work propely, while others don't. Users should not be
switching on and off this property manually when changing brushes if they
want to use unified size. This is also causing that some users are using
the brushes with an incorrect configuration.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6291
|
|
Frame Selected centers around the last valid stroke.
When Symmetry is enabled the last mirrored `location` was added to the
`average_stroke_accum` in stead of the original stroke location.
This patch will add the `true_location` to the `average_stroke_accum`.
This contains the original stroke location.
Issue happened in Vertex and Weight paint.
Reviewed By:
Pablo Dobarro
Differential Revision: https://developer.blender.org/D6161
|
|
This solves performance issues on some computers where there is significant
threading overhead. Rather than doing the complicated work of optimizing our
own task scheduler, use TBB which appears to work well. The downside is that
we have another thread pool, but it is already there when using OpenVDB voxel
remesh.
For future releases we can switch to using TBB to replace our task scheduler
implementation entirely, and use the same thread pool for BLI_task, Cycles,
Mantaflow, etc.
Differential Revision: https://developer.blender.org/D6030
|
|
|
|
Easier to experiment with different settings this way.
|
|
Not all the necessary state got restored.
|
|
Stroke update use now the location from Strokecache instead of the mouse
position.
Differential Revision: https://developer.blender.org/D5861
|
|
|
|
|
|
Particularly noticeable when vertex painting with a subsurf modifier.
In some cases every sculpt or paint stroke step would evaluate the dependency
graph. This should only happen for redraws. Now more selectively choose if the
dependency graph should be evaluated to initialize the view context. Doing it
in the view context evaluation is somewhat hidden, now it's more explicit.
Differential Revision: https://developer.blender.org/D5844
|
|
Also applied to sculpt mode
|
|
While these aren't currently used, its strange to have
extended versions of a function without the non-extended versions
it also avoids callers needing to add them back if they need -
or duplicating the same boiler plate when calling the '_ex' versions.
Reverts 11da3b132aff1, 11da3b132aff1, adds depsgraph argument
so the caller is responsible for the evaluation state.
|
|
This change ensures that operators which needs access to evaluated data
first makes sure there is a dependency graph.
Other accesses to the dependency graph made it more explicit about
whether they just need a valid dependency graph pointer or whether they
expect the graph to be already evaluated.
This replaces OPTYPE_USE_EVAL_DATA which is now removed.
Some general rules about usage of accessors:
- Drawing is expected to happen from a fully evaluated dependency graph.
There is now a function to access it, which will in the future control
that dependency graph is actually evaluated.
This check is not yet done because there are some things to be taken
care about first: for example, post-update hooks might leave scene in
a state where something is still tagged for update.
- All operators which needs to access evaluated state must use
CTX_data_ensure_evaluated_depsgraph().
This function replaces OPTYPE_USE_EVAL_DATA.
The call is generally to be done in the very beginning of the
operator, prior other logic (unless this is some comprehensive
operator which might or might not need access to an evaluated state).
This call is never to be used from a loop.
If some utility function requires evaluated state of dependency graph
the graph is to be passed as an explicit argument. This way it is
clear that no evaluation happens in a loop or something like this.
- All cases which needs to know dependency graph pointer, but which
doesn't want to actually evaluate it can use old-style function
CTX_data_depsgraph_pointer(), assuming that underlying code will
ensure dependency graph is evaluated prior to accessing it.
- The new functions are replacing OPTYPE_USE_EVAL_DATA, so now it is
explicit and local about where dependency graph is being ensured.
This commit also contains some fixes of wrong usage of evaluation
functions on original objects. Ideally should be split out, but in
reality with all the APIs being renamed is quite tricky.
Fixes T67454: Blender crash on rapid undo and select
Speculation here is that sometimes undo and selection operators are
sometimes handled in the same event loop iteration, which leaves
non-evaluated dependency graph.
Fixes T67973: Crash on Fix Deforms operator
Fixes T67902: Crash when undo a loop cut
Reviewers: brecht
Reviewed By: brecht
Subscribers: lichtwerk
Maniphest Tasks: T67454
Differential Revision: https://developer.blender.org/D5343
|
|
|
|
TLS and Settings can be used by other types of parallel 'for loops', so
removing 'Range' from their names.
No functional changes expected here.
|