| Age | Commit message (Collapse) | Author |
|---|
|
The report does not include any file, but probably that file is using the
settings for unified colors, which are currently not available in the UI,
so it always paints black. This enables unified colors and secondary
colors for sculpt vertex colors, so it should solve that issue.
Unified color does not make much sense now as the Paint tool is the only
one that has paint capabilities, but it will do in the future when
sculpt and paint at the same time is enabled and the paint capability is
added to more tools.
Reviewed By: sergey
Maniphest Tasks: T78323
Differential Revision: https://developer.blender.org/D8136
|
|
The defaults for the Smear tool were making it too weak in high poly
meshes, specially the alpha/pressure option enabled by default. Now this
option is disabled, it has a linear pressure curve and less spacing.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8134
|
|
|
|
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8110
|
|
|
|
The clay strips brush tip tests distances against a cube with beveled Z
aligned edges. This cube was positioned with its center in the surface
of the mesh, so when producing large deformation, some vertices that
should be deformed were positioned further than the cube's Z dimension,
so they were left behind, producing artifacts.
This displaces and deforms the local space to position the brush tip
cube (now a prism) towards the deformation direction, so more vertices
can be included, removing most of these artifacts.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8004
|
|
The draw face set tool always needs to redraw the nodes, but it only
needs the full update when in smooth mode because it moves the vertices.
Reviewed By: sergey
Maniphest Tasks: T78192
Differential Revision: https://developer.blender.org/D8108
|
|
|
|
Sculpt Vertex Colors is a painting system that runs inside sculpt mode, reusing all its tools and optimizations. This provides much better performance, easier to maintain code and more advanced features (new brush engine, filters, symmetry options, masks and face sets compatibility...). This is also the initial step for future features like vertex painting in Multires and brushes that can sculpt and paint at the same time.
This commit includes:
- SCULPT_UNDO_COLOR for undo support in sculpt mode
- SCULPT_UPDATE_COLOR and PBVH flags and rendering
- Sculpt Color API functions
- Sculpt capability for sculpt tools (only enabled in the Paint Brush for now)
- Rendering support in workbench (default to Sculpt Vertex Colors except in Vertex Paint)
- Conversion operator between MPropCol (Sculpt Vertex Colors) and MLoopCol (Vertex Paint)
- Remesher reprojection in the Voxel Remehser
- Paint Brush and Smear Brush with color smoothing in alt-smooth mode
- Parameters for the new brush engine (density, opacity, flow, wet paint mixing, tip scale) implemented in Sculpt Vertex Colors
- Color Filter
- Color picker (uses S shortcut, replaces smooth)
- Color selector in the top bar
Reviewed By: brecht
Maniphest Tasks: T72866
Differential Revision: https://developer.blender.org/D5975
|
|
Draw Face Sets does not work in Dyntopo and the sculpt API should be
responsible for that without needing to add checks all over the code,
but it was doing an undo push of type SCULPT_UNDO_FACE_SETS which is not
supported, causing the crash.
Reviewed By: sergey
Maniphest Tasks: T77328
Differential Revision: https://developer.blender.org/D7924
|
|
This operator performs an edit operation in the active face set defined
by the cursor position and updates the visibility. For now, it has a
Grow and Shrink operations, similar to Select More/Less in edit mode or
to the mask filter Grow/Shrink modes. More operations can be added in
the future.
In multires, this updates the visibility of an entire face from the base
mesh at once, which makes it very convenient to edit the visible area
without manipulating the face set directly.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7367
|
|
|
|
Applying gravity to this brush does not make much sense and undo/redo
won't work correctly as it uses a different undo type.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7925
|
|
Mix up with imapaint.paintcursor & imapaint.paint.paint_cursor
Remove imapaint.paintcursor since it wasn't used.
Also rename paint_cursor_start_explicit() to paint_cursor_start(),
removing the existing paint_cursor_start() since it took the paint
struct from the context, a value that's known by all callers.
|
|
This caused an additional argument when exiting object modes
and many other low level functions which don't need to access context.
This simplifies fixing T77073.
|
|
This was missing from when Face Sets were enabled in Multires, so it was
always considering that all vertices in the grids are visible. This
should also fix other unreported bugs.
Reviewed By: sergey
Maniphest Tasks: T76776
Differential Revision: https://developer.blender.org/D7809
|
|
This tool is similar to the cloth brush, but it applies the cloth
simulation deformation to the whole mesh in an uniform way. The
simulation can be controlled using the mask to pin vertices and the face
sets to define force action areas.
It uses the same solver as the cloth brush which now no longer depends
on StrokeCache.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7857
|
|
This was propsed in D7059, so I applied it to the rest of the code
Reviewed By: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D7480
|
|
|
|
The grab mode was not correctly implemented, so the way it was working
was confusing for users.
- Grab delta was calculated in increments from the last stroke position, so it did not match the behavior of a grab brush. I refactored the grab delta calculation to make this change more explicit.
- Grab displacement was not calculated from the original coordinates
- Grab was using an incorrect strength
Grab is now setting the position of the affected vertices directly and
the constraints solve the rest of the cloth. I also tried to implement
an alternative version based on applying forces to move the vertices to
the grab position, but I think this is more controllable and the grab
falloff can be adjusted by tweaking the simulation falloff.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7756
|
|
The implementation of this function should match the one in
SCULPT_vertex_co_get. This does not solve the issue when sculpting with
modifiers active but I think this code is wrong
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D7805
|
|
|
|
|
|
|
|
This operation is using the code of the mirror modifier, so no default
is guaranteed to work in all cases. This value matches the defaults of
the mirror modifier.
Reviewed By: jbakker
Maniphest Tasks: T75977
Differential Revision: https://developer.blender.org/D7495
|
|
|
|
|
|
|
|
|
|
This implements the restore function for Draw Face Sets and Layer, which
don't affect coordinates or masks directly. This is needed for the
anchored and dot brush strokes.
Layer frees the current displacement and a new one is created on each
stroke sample. Draw Face Sets copies the data back from the first undo
node to the mesh datalayer.
Also fixes T75727
Reviewed By: jbakker
Maniphest Tasks: T75727
Differential Revision: https://developer.blender.org/D7442
|
|
The current clay strips brush has a huge dynamic range which is nice for
certain effects, but in some pen tablets it is quite hard to control on
the higher values and it ends up producing unwanted artifacts. This
changes the input curves a bit in an attempt to make it more
controllable.
After adding a brush management system I will expose all these values to
be configurable per brush (the round version of clay strips is a little
bit better with different curves, but that is something that we can't
support now), but for now this default are probably safer.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7524
|
|
Return the correct sculpt level in BKE_multires_sculpt_level_get and
enable the property in the UI
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7575
|
|
This patch enables TBB as the default task scheduler. TBB stands for Threading Building Blocks and is developed by Intel. The library contains several threading patters. This patch maps blenders BLI_task_* function to their counterpart. After this patch we can add more patterns. A promising one is TBB:graph that can be used for depsgraph, draw manager and compositor.
Performance changes depends on the actual hardware. It was tested on different hardwares from laptops to workstations and we didn't detected any downgrade of the performance.
* Linux Xeon E5-2699 v4 got FPS boost from 12 to 17 using Spring's 04_010_A.anim.blend.
* AMD Ryzen Threadripper 2990WX 32-Core Animation playback goes from 9.5-10.5 FPS to 13.0-14.0 FPS on Agent 327 , 10_03_B.anim.blend.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D7475
|
|
Should be no functional changes.
|
|
The Layer brush was in Blender before 2.81, when the sculpt API was
introduced. It had a huge amount of bugs and glitches which made it
almost unusable for anything but the most trivial cases. Also, it needed
some hacks in the code just to support the persistent base.
The brush was completely rewritten using the Sculpt API. It fulfills the
same use case as the old one, but it has:
- All previous artifacts fixed
- Simpler code
- Persistent base now works with multires thanks to the sculpt API
- Small cursor widget to preview the layer height
- More controllable and smoother strength and deformation
- More correct masking support
- More predictable invert support. When using persistent base, the brush invert mode resets to layer height 0, instead of jumping from +1 to -1. The brush can still be inverted in the brush direction property.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7147
|
|
Geometry that was just added to sculpt mode has the SCULPT_FACE_SET_NONE
assigned, so it was hidden by default. By doing this when entering
sculpt mode a new visible face set is created for it, making it easier
to isolate it again if you want to do further tweaking with the sculpt
tools.
Also, this also fixes the issue that may happen when changing the mesh
visibility in edit mode. Now visibility changes done outside sculpt mode
are stored in the face sets when entering sculpt mode, so mesh
visibility should stay the same.
Reviewed By: jbakker
Maniphest Tasks: T75104
Differential Revision: https://developer.blender.org/D7249
|
|
|
|
|
|
|
|
|
|
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
|
|
|
|
|
|
Follow up of b2ee1770d4c3 and 10c2254d412d, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
Differential Revision: https://developer.blender.org/D7018
|
|
Continuation of b2ee1770d4c3, now non-single word variables are also
renamed.
Part of T74432.
Also ran clang-format on affected files.
|
|
This adds the automasking options to the Sculpt Tool options in a way
that they affect all brushes. This is more convenient when working with
some of these options while switching brushes as they don't need to be
enabled/disabled per brush.
An automasking option is enabled if it is enabled in the brush or in the
sculpt options.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7304
|
|
With this brush option it is possible to mask the boundary vertices of
all face sets. This is especially useful in the cloth brush, where face
sets can be used to simulate seams between different patches of cloth
and produce different patterns and effects.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7230
|
|
Allows to know what level sculpting has been done after the value has
been changed in the MultiresModifierData.
No functional changes, just preparing code to have everything needed
for propagation undo.
Differential Revision: https://developer.blender.org/D7307
|
|
This fixes the following issues:
- Previously, the face set from the active vertex was used directly. Vertices always return the most recently created face set, so in some cases there may be some face sets that were not possible to select as active. Now the active face set is set in the ray intersection, so it always matches the face under the cursor.
- When drawing face sets they were set per vertex, so it was not possible to paint one face at a time. Now face sets are painted per poly when using the brush on meshes, testing the distance to the center of each poly.
- The code for the active vertex on PBVH_GRIDS was not correct, so I also fixed that to test if everything was working correctly.
{F8441699}
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7303
|
