| Age | Commit message (Collapse) | Author |
|---|
|
Mask and color brushes were using the existing PBVH vertex "update tag"
to mark their modifications. This was mostly unnecessary, and causes
unnecessary calculation of normals. It also caused errors though,
because they didn't tag the corresponding PBVH node for normal
recalculation, causing problems on the borders of nodes, since one
node might accumulate into another's vertex normals, but the other
node wouldn't also accumulate and normalize the normals.
The solution is to only use the update tag for tagging deformed
vertices that need recalculated normals. Everything else is handled at
the PBVH node level (which was already the case, but it wasn't clear).
The update tag was also used for undo to tag the nodes corresponding to
changed vertices. This was wrong though, because normals and visibility
would also be recalculated for just color or mask undo steps. Instead,
just use local arrays to map from vertices to nodes.
Differential Revision: https://developer.blender.org/D15581
|
|
You can now push multiple sculpt undo nodes
of different types. This is necassary to handle
paint tools that have gravity enabled.
|
|
- Avoid ambiguity which caused these values to be confused, use `mval`
for region relative mouse coordinates, otherwise `event_xy`.
- Pass region relative coordinates to sample_detail_dyntopo &
sample_detail_voxel as there is no reason to use screen-space values.
- Rename invalid use of mval for screen-space coordinates.
|
|
Color filter sharpening now clamps the output.
The sharpening delta is now calculated from the
difference of two levels of vertex averaging instead
of one smooth iteration and the base color.
TODO: Sharpen in a different color space;
SRGB-linear has saturation artifacts. I
tried HSL but it had value artifacts. I'd
like to try LAB but we don't seem to have
conversion functions for it (at least as far
as I could see).
|
|
color attribute system.
This commit removes sculpt colors from experimental
status and unifies it with vertex colors. It
introduces the concept of "color attributes", which
are any attributes that represents colors. Color
attributes can be represented with byte or floating-point
numbers and can be stored in either vertices or
face corners.
Color attributes share a common namespace
(so you can no longer have a floating-point
sculpt color attribute and a byte vertex color
attribute with the same name).
Note: this commit does not include vertex paint mode,
which is a separate patch, see:
https://developer.blender.org/D14179
Differential Revision: https://developer.blender.org/D12587
Ref D12587
|
|
At the time of naming these members only some event types generated
click events so it made some sense to differentiate a click.
Now all buttons support click & drag it's more logical to use the
prefix "prev_press_" as any press event will set these values.
Also update doc-strings.
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
This is part of the project of converting `MVert` into `float3`.
(more details in T93602), The pbvh update flag is removed and
replaced with a bitmap stored in the PBVH structure. This
patch is similar to D13878. This is mainly setup for an eventual
performance improvement by removing the extra data from
mesh vertices, but if it's consistent with testing in the other patch
doing the same thing for another "temp tag", then it may actually
increase the speed of sculpt code slightly, since less memory needs
to be loaded when checking/changing the flags.
Differential Revision: https://developer.blender.org/D14000
|
|
As described in T91186, this commit moves mesh vertex normals into a
contiguous array of float vectors in a custom data layer, how face
normals are currently stored.
The main interface is documented in `BKE_mesh.h`. Vertex and face
normals are now calculated on-demand and cached, retrieved with an
"ensure" function. Since the logical state of a mesh is now "has
normals when necessary", they can be retrieved from a `const` mesh.
The goal is to use on-demand calculation for all derived data, but
leave room for eager calculation for performance purposes (modifier
evaluation is threaded, but viewport data generation is not).
**Benefits**
This moves us closer to a SoA approach rather than the current AoS
paradigm. Accessing a contiguous `float3` is much more efficient than
retrieving data from a larger struct. The memory requirements for
accessing only normals or vertex locations are smaller, and at the
cost of more memory usage for just normals, they now don't have to
be converted between float and short, which also simplifies code
In the future, the remaining items can be removed from `MVert`,
leaving only `float3`, which has similar benefits (see T93602).
Removing the combination of derived and original data makes it
conceptually simpler to only calculate normals when necessary.
This is especially important now that we have more opportunities
for temporary meshes in geometry nodes.
**Performance**
In addition to the theoretical future performance improvements by
making `MVert == float3`, I've done some basic performance testing
on this patch directly. The data is fairly rough, but it gives an idea
about where things stand generally.
- Mesh line primitive 4m Verts: 1.16x faster (36 -> 31 ms),
showing that accessing just `MVert` is now more efficient.
- Spring Splash Screen: 1.03-1.06 -> 1.06-1.11 FPS, a very slight
change that at least shows there is no regression.
- Sprite Fright Snail Smoosh: 3.30-3.40 -> 3.42-3.50 FPS, a small
but observable speedup.
- Set Position Node with Scaled Normal: 1.36x faster (53 -> 39 ms),
shows that using normals in geometry nodes is faster.
- Normal Calculation 1.6m Vert Cube: 1.19x faster (25 -> 21 ms),
shows that calculating normals is slightly faster now.
- File Size of 1.6m Vert Cube: 1.03x smaller (214.7 -> 208.4 MB),
Normals are not saved in files, which can help with large meshes.
As for memory usage, it may be slightly more in some cases, but
I didn't observe any difference in the production files I tested.
**Tests**
Some modifiers and cycles test results need to be updated with this
commit, for two reasons:
- The subdivision surface modifier is not responsible for calculating
normals anymore. In master, the modifier creates different normals
than the result of the `Mesh` normal calculation, so this is a bug
fix.
- There are small differences in the results of some modifiers that
use normals because they are not converted to and from `short`
anymore.
**Future improvements**
- Remove `ModifierTypeInfo::dependsOnNormals`. Code in each modifier
already retrieves normals if they are needed anyway.
- Copy normals as part of a better CoW system for attributes.
- Make more areas use lazy instead of eager normal calculation.
- Remove `BKE_mesh_normals_tag_dirty` in more places since that is
now the default state of a new mesh.
- Possibly apply a similar change to derived face corner normals.
Differential Revision: https://developer.blender.org/D12770
|
|
Ref T92709
|
|
Use arrays for wmEvent coordinates, this quiets warnings with GCC11.
- `x, y` -> `xy`.
- `prevx, prevy` -> `prev_xy`.
- `prevclickx, prevclicky` -> `prev_click_xy`.
There is still some cleanup such as using `copy_v2_v2_int()`,
this can be done separately.
Reviewed By: campbellbarton, Severin
Ref D12901
|
|
By argument naming and convention this is the intended argument order.
|
|
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10707
|
|
|
|
Approximately 33 changes of capitalization to conform to MLA title style.
Differential Revision: https://developer.blender.org/D9796
Reviewed by Julian Eisel
|
|
When inverting erase displacement the filter can increase the
displacement over the limit surface. After using apply base, this can be
used as an alternative intensify details as it usually gives better
results.
This is the same concept as smoothing inverting to intensify details.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9679
|
|
Issue exposed by rB4c7b1766a7f1.
Main idea is that non-memfile first undo step should check into previous
memfile and tag the ID it is editing as `future_changed`.
That way, when we go back and undo to the memfile, said IDs are properly
detected as changed and re-read from the memfile.
Otherwise, undo system sees them as unchanged, and just re-use the
current data instead.
Note that currently only Sculpt mode seems affected (probably because it
is storing the mode switch itself as a Sculpt undo step instead of a
memfile one), but similar action might be needed in some other cases
too.
Maniphest Tasks: T82388
Differential Revision: https://developer.blender.org/D9510
|
|
When using the sculpt filters, global automasking settings that affect
all brushes were ignored because the automasking system was not
implemented for filters, making filters and brushes react differently
to the global sculpt settings which creates confusion.
This makes all filter tools (mesh, cloth, color) use the same general
automasking settings and features as the brush tools. Filters will now
use the settings in the options panel to limit their effect.
This also removes the "use Face Sets" option from the Mesh filter code,
as it was duplicated from the automasking code just to have that
funcitonality. This is now handled by the regular automasking system.
The "Use Face Sets" option is still available in the cloth filter as that
option limits the action of the forces, not the displacement.
After this, it is possible to initialize the automasking system
independently from the StrokeCache and Brush settings, so it can also be
added to more tools and features in the future.
Fixes T81619
Reviewed By: dbystedt, sergey
Maniphest Tasks: T81619
Differential Revision: https://developer.blender.org/D9171
|
|
This filter scales the mesh as it was a softbody, producing folds in the
surface. The orientation of the folds can be controlled using the filter
axis and orientation.
This is an example of a cloth filter that uses deform coordinates instead
of forces, but probably it does not make much sense to expose it to the
user in a different way and with different parameters. I'll remove
FilterCache->enabled_force_axis in a later commit and use always
enabled_axis in SCULPT_filter_zero_disabled_axis_components
for both forces and deformation filters, so this function can also be used
in the mesh filter.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8661
|
|
All filters were using prevclicx, which is in screen coordinates and
mval[0], which is in region coordinates to get the filter strength.
This fixes the issue in all filters.
Reviewed By: Severin
Maniphest Tasks: T80311
Differential Revision: https://developer.blender.org/D8776
|
|
This moves the allocation for filter to separate functions, removes all
repeated calls to RNA_enum_get an fixes some other code quality issues.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8639
|
|
|
|
Same concept as the Multires Displacement Eraser Brush but implemented
as a mesh Filter. This allows to delete the displacement of an entire
area uniformly.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8608
|
|
Exact same operation as D8509, implemented as a Mesh Filter.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8510
|
|
Previously, the XYZ deform axis of the Mesh Filter were limited to
object space (which is the default for sculpt mode). Now it is possible
to limit the XYZ displacement in Local, Global or View space.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8582
|
|
Differential Revision: https://developer.blender.org/D8553
|
|
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8529
|
|
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8528
|
|
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8523
|
|
Also order sizeof(..) first to promote other values to size_t.
|
|
|
|
This adds a curvature smoothing and intensify details properties to control
the result of the Sharpen Mesh Filter.
Curvature smoothing removes high frequency details from the precalculated
sharpen data, so the filter result has much smoother surfaces and cleaner
sharpen lines;
Intensify details displaces the vertices of creases and valleys in the direction
opposite to its neighbors average, so it intensifies high frequency details
in those areas, producing more noisy and sharp shapes:
Both this properties can be used in combination to achieve a good balance of
high and low frequency details depending on the shape and the desired result.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8447
|
|
Previously, mesh boundaries were relaxed as any other vertex, which was
causing artifacts and unwanted deformation. In order to prevent this,
the mesh filter was using the automasking system to lock the boundary
vertices, which was hacked into the tool. For the brush, the only
solution was to enable boundary automasking to lock those vertices
in plance.
Now the relax vertex function slides the boundary vertices along the
mesh boundary edges, relaxing all the topology correctly while
preserving the shape of the mesh. The automasking hack in the relax
mesh filter was also removed as now vertices slide correctly along
the boundary.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8350
|
|
This issue was produced by a hack in the sculpt mode code from 2.80
when the sculpt API for connectivity info was not available.
The smooth brush was the only brush that needed connectivity info,
so there were 3 different smooth functions with the connectivity
queries implemented for dyntopo, meshes and grids. The mesh version
of smoothing was checking the number of connected faces to a vertex
to mask the mesh boundaries, which was not covering all cases and
was hardcoded in the smooth function itself.
This patch removes all those legacy functions and unifies all
smooth functions into a single one using the new API and the
automasking system. In order to achieve this, there were needed
some extra changes:
- The smooth brush now does not automasks the boundaries by default,
so its default preset needs to be updated to enable automasking
- The mesh boundary info is extracted once and cached in a
bitmap, similar to the disconnected elements IDs. This makes
boundary detection work as expected in all cases, solving a lot
of known issues with the smooth brush. In multires, this info is
extracted and cached only at the base mesh level, so it is much
more memory efficient than the previous automasking system.
- In order to keep the brushes responsive as they were before,
the automasking system can now skip creating the cache when it
is not needed for the requested options. This means that for
high poly meshes and simple automasking options the brushes
won't lag on start.
Reviewed By: sergey
Maniphest Tasks: T78747
Differential Revision: https://developer.blender.org/D8260
|
|
As tools iterators skip not visible vertices, fully hidden nodes can
also be skipped and considered as masked.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8244
|
|
Threaded Sculpt is now always enabled by default. If it causes
performance problems compared single threaded sculpt it should be
considered a bug.
Reviewed By: sergey
Maniphest Tasks: T77638
Differential Revision: https://developer.blender.org/D7960
|
|
Sculpt Vertex Colors is a painting system that runs inside sculpt mode, reusing all its tools and optimizations. This provides much better performance, easier to maintain code and more advanced features (new brush engine, filters, symmetry options, masks and face sets compatibility...). This is also the initial step for future features like vertex painting in Multires and brushes that can sculpt and paint at the same time.
This commit includes:
- SCULPT_UNDO_COLOR for undo support in sculpt mode
- SCULPT_UPDATE_COLOR and PBVH flags and rendering
- Sculpt Color API functions
- Sculpt capability for sculpt tools (only enabled in the Paint Brush for now)
- Rendering support in workbench (default to Sculpt Vertex Colors except in Vertex Paint)
- Conversion operator between MPropCol (Sculpt Vertex Colors) and MLoopCol (Vertex Paint)
- Remesher reprojection in the Voxel Remehser
- Paint Brush and Smear Brush with color smoothing in alt-smooth mode
- Parameters for the new brush engine (density, opacity, flow, wet paint mixing, tip scale) implemented in Sculpt Vertex Colors
- Color Filter
- Color picker (uses S shortcut, replaces smooth)
- Color selector in the top bar
Reviewed By: brecht
Maniphest Tasks: T72866
Differential Revision: https://developer.blender.org/D5975
|
|
Instead of accumulating displacement for each vertex into the neighbors, accumulate the opposite displacement from each neighbor into the vertex. I think this is the same and it does not produce artifacts in Multires.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D7508
|
|
This tool is similar to the cloth brush, but it applies the cloth
simulation deformation to the whole mesh in an uniform way. The
simulation can be controlled using the mask to pin vertices and the face
sets to define force action areas.
It uses the same solver as the cloth brush which now no longer depends
on StrokeCache.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7857
|
|
This was returning the wrong face set in cases where the active vertex
has more than one available face set.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7858
|
|
|
|
This patch enables TBB as the default task scheduler. TBB stands for Threading Building Blocks and is developed by Intel. The library contains several threading patters. This patch maps blenders BLI_task_* function to their counterpart. After this patch we can add more patterns. A promising one is TBB:graph that can be used for depsgraph, draw manager and compositor.
Performance changes depends on the actual hardware. It was tested on different hardwares from laptops to workstations and we didn't detected any downgrade of the performance.
* Linux Xeon E5-2699 v4 got FPS boost from 12 to 17 using Spring's 04_010_A.anim.blend.
* AMD Ryzen Threadripper 2990WX 32-Core Animation playback goes from 9.5-10.5 FPS to 13.0-14.0 FPS on Agent 327 , 10_03_B.anim.blend.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D7475
|
|
In the main mesh filter loop vertex that do not have the active face set
are skipped, so in the following surface smooth displacement loop these
vertices were deformed using an uninitialized laplacian_disp value.
Now the main loop initializes the laplacian_disp for all vertices and
the deformation based on face sets is skipped in the second loop.
Reviewed By: jbakker
Maniphest Tasks: T75662
Differential Revision: https://developer.blender.org/D7443
|
|
|
|
This mesh filter sharpens and smooths the mesh based on its curvature,
resulting in pinching hard edges and polishing flat surfaces. It fixes
most of the artifacts of the voxel remesher and those produced when
sculpting hard surfaces and stylized models with creasing and flattening
brushes.
It needs and accumulate_displacement step before each filter iteration which
can't be multithreaded in an easy way (it would need something to sync the
threads when modifying the data of neighbors in a different node), but this
does not affect performance in a significant way.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7335
|
|
|
|
|
|
|
