Age | Commit message (Collapse) | Author |
|
|
|
Should not do anything in that case.
ref T82615
Maniphest Tasks: T82615
Differential Revision: https://developer.blender.org/D9532
|
|
This is more in line to other eyedropper usages throughout blender.
Affected operators:
- Sample Dyntopo detail
- Extract Face Set (as reported in T82615)
ref T82615
Maniphest Tasks: T82615
Differential Revision: https://developer.blender.org/D9531
|
|
Issue exposed by rB4c7b1766a7f1.
Main idea is that non-memfile first undo step should check into previous
memfile and tag the ID it is editing as `future_changed`.
That way, when we go back and undo to the memfile, said IDs are properly
detected as changed and re-read from the memfile.
Otherwise, undo system sees them as unchanged, and just re-use the
current data instead.
Note that currently only Sculpt mode seems affected (probably because it
is storing the mode switch itself as a Sculpt undo step instead of a
memfile one), but similar action might be needed in some other cases
too.
Maniphest Tasks: T82388
Differential Revision: https://developer.blender.org/D9510
|
|
|
|
|
|
When painting in the image editor on data images (Non-color, Raw) the
color mismatched between the sampled color and the actual effect that
the painting has on the image. The root cause is that the sampling is
color managed, but the painting still uses a fixed color management
pipeline with a lot of assumptions. Due to recent changes the drawing
of the image editor is color managed, but the painting isn't what made
these changes show up.
This patch is a work-a-round so that the sampled colors and the effect
the paint has on the texture matches. This isn't the correct solution
as that would be to migrate all the painting tools to use proper color
management.
Reviewed By: Pablo Dobarro
Differential Revision: https://developer.blender.org/D9411
|
|
There are two implementations of the Sample Color operation. One is used
by the paint texture and one by the image editor. The image editor
variant sampled from the ibuf directly, but the paint texture variant
was sampling from the screen front buffer. This can lead into incorrect
samples due to color pipeline.
This patch will use the image editor variant when sampling a color for
2d texture painting
Reviewed By: Pablo Dobarro
Differential Revision: https://developer.blender.org/D9408
|
|
|
|
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D9422
|
|
|
|
|
|
Reviewers: pablodp606
Differential Revision: https://developer.blender.org/D9472
|
|
The code was trying to ignore hidden geometry when doing boolean,
which is correct when used as a tool, but not when a modifier.
Added a "keep_hidden" argument to bmesh_boolean to distinguish the
two cases.
Also fixed a bug when the tool is used with hidden geometry that
is attached to unhidden geometry that is deleted by the operation.
|
|
The code was trying to ignore hidden geometry when doing boolean,
which is correct when used as a tool, but not when a modifier.
Added a "keep_hidden" argument to bmesh_boolean to distinguish the
two cases.
Also fixed a bug when the tool is used with hidden geometry that
is attached to unhidden geometry that is deleted by the operation.
|
|
Move headers files from `render/extern/` to `render/`
Part of T73586
|
|
|
|
Missed this last commit.
|
|
|
|
|
|
|
|
The draw face sets brush uses the poly center when used in meshes to increase
its precision when working in low poly geometry. For this to work with deformed
meshes, the deformed coordinates from the PBVH should be used instead.
Reviewed By: sergey
Maniphest Tasks: T81915
Differential Revision: https://developer.blender.org/D9424
|
|
BKE_mesh_free() seems to not free the meshes correctly, so using BKE_id_free() instead.
The looptri array was also not freed.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9426
|
|
Just a missing immUnbindProgram
Reviewed By: sergey
Maniphest Tasks: T82400
Differential Revision: https://developer.blender.org/D9459
|
|
Used the sampled cursor normal when available instead of the raycast face normal.
This makes the preview match the previous orientation of the cursor.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9460
|
|
|
|
This enables self intersections in the sculpt trimming tools boolean operations.
This should fix wrong booleans results after using the operator to add new disconnected
geometry with the join mode.
Reviewed By: sergey
Maniphest Tasks: T81799
Differential Revision: https://developer.blender.org/D9423
|
|
symmetry pass
The cloth brush fixed simulation areas are created using the initial_location variable in the
StrokeCache. This variable was not being updated by tiling symmetry, so all symmetry passes
were using the same simulation area location.
Reviewed By: sergey
Maniphest Tasks: T81842
Differential Revision: https://developer.blender.org/D9421
|
|
The strength of this brush needs to take alpha into account
Reviewed By: sergey
Maniphest Tasks: T82297
Differential Revision: https://developer.blender.org/D9419
|
|
|
|
This introduces a new operator to edit the detail size of constant
detail mode in dyntopo. The way this operator works and the
functionality it provides is similar to the "Voxel size edit" operator
for the voxel remesher.
It also includes a sample mode. When pressing Ctrl, the detail size
will be sampled from the surface under the cursor, updating the
preview in real time. This allows quick resolution changes without
using the operator multiple times.
The operator is set to Shift + D, replacing the old way to change
the constant detail size of dyntopo. Shift + R will remain available to
be enabled when the voxel remesher works with dyntopo. Deciding
if both detail sizes can be unified needs a separate discussion as the
new dyntopo can work with detail sizes in parts of the mesh that can
easily crash the remesher.
The structure of these operators is similar, but the data they control,
ranges, drawing and setup functions are completely different, making it
hard to merge them into one.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9355
|
|
This adds an option to orientate the trimming shape using the surface
normal instead of the view when lasso trim is used.
Reviewed By: dbystedt, sergey
Differential Revision: https://developer.blender.org/D9231
|
|
Wasnt checking the symmetrized 'grab_delta_symmetry' so result could
flip around.
Maniphest Tasks: T82188
Differential Revision: https://developer.blender.org/D9373
|
|
The logic of `BKE_sculpt_update_object_for_edit` was not correct. such
low-level functions should typically never preform depsgraph evaluation
themselves, they should be able to rely on getting a fully evaluated
depsgraph and just get needed data from there.
Supporting that required fixing other broken code higher in the
callstack, namely:
* `ED_object_sculptmode_enter_ex` was freeing evaluated data, for no
valid reason it would seem.
* `sculpt_undosys_step_decode` was ensuring an evaluated depsgraph
**before** calling `ED_object_mode_generic_exit`, which would
invalidate a lot of evaluated data.
Note that it is fairly difficult to track down all code paths leading to
`BKE_sculpt_update_object_for_edit`, so there may be still cases where
this gets called with improperly evaluated depsgraph.
Reviewed By: sergey
Maniphest Tasks: T81854
Differential Revision: https://developer.blender.org/D9270
|
|
Follow our code style for doxygen sections.
|
|
|
|
|
|
When using local area, all nodes need to build their constraints first
before activating them for simulation. THis ensures that nodes get their
structural constraints from the initial location of each symmetry pass.
Reviewed By: sergey
Maniphest Tasks: T81904
Differential Revision: https://developer.blender.org/D9303
|
|
The plane deformation falloff was introduced in the first version of the
cloth brush, but due to the lack of all the new features and fixes in the
solver it was causing a lot of artifacts for deformation brushes. In
order to avoid that, the cloth brush was always using radial falloff for
the grab brush.
Now the plane falloff is properly implemented using the deformation
constraints.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9320
|
|
This adds a tool property for sculpt line gesture tools (line and
project) to limits its effect to the segment of the gesture instead of
using the infinite line to bisect the mesh in two parts.
To achieve that, the line gesture now has two extra side planes that can
be enabled/disabled for getting the nodes from the PBVH and to test the
vertices.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9307
|
|
This adds an operation mode to the Face Set Edit tool which deletes the
geometry of a Face Set by clicking on it.
The operator also checks for the mesh having a single Face Set to avoid
deleting the entire object by accident.
This is also disabled for Multires to avoid modifying the limit surface
without control (it is not an important limitation as base meshes for
multires are usually final, but maybe it can be supported in the future).
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8938
|
|
|
|
clipped geometry
Caused by rB7878adf49cff.
When getting the stroke location via raycast in ortho view, the above
commit flipped the condition of the check to perform adjustments on the
rays start/end. This would thus happen (even though it shouldnt),
resulting in wrong depth and stroke location.
Now just flip the condition back, so adjustments only happen when
clipping is OFF.
Maniphest Tasks: T81934
Differential Revision: https://developer.blender.org/D9318
|
|
This adds a property to the grab that masks vertices based on its
original normal and grab delta. When used on thin meshes, it allows to
grab the silhouette from one side of the object without affecting the
shape of the other side.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9205
|
|
Paint and smear tools are only implemented for regular mesh PBVH,
meaning they are not supported by the dynamic topology and multires
sculpting.
These tools are to be ignored for an unsupported sculpt modes, regardless
of state of user preferences.
Reviewed By: sergey
Maniphest Tasks: T81932
Differential Revision: https://developer.blender.org/D9308
|
|
shapekeys/modifiers
This was failing for all mask filters (sharpen, grow, invert, clear,
shrink, contrast, smooth) and mask gestures (box, lasso).
Also have to recalc shading, use SCULPT_tag_update_overlays for this.
ref D8956
Maniphest Tasks: T81929
Differential Revision: https://developer.blender.org/D9302
|
|
Line gesture use always the right side of the line as active (the area
of the mesh that is going to be modified) by default.
This adds the ability to change the active side when the line gesture is
active by pressing the F key.
This allows more freedom to position the line after starting the
gestures, as it won't be required to cancel the operation or undo if the
line was used in the wrong direction.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D9301
|
|
|
|
SCULPT_tilt_apply_to_normal expects a normal, and offset was already
scaled by radius. The funcion returns a normalized vector, so the
strength of the brush was changed.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9275
|
|
The line gesture plane should be in object space, not in world space.
|