| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This commit introduces a new mode for calculating the positions and
weights of the IK segments in the Pose Brush based on the Face Sets.
The first segment of the chain will always include all face sets inside
the brush radius and it will propagate until the boundary of the last
face sets added in the flood fill. Then consecutive connected face sets
are added to the chain until the chain length limit is reached or all
face sets of the mesh are already part of the chain.
This feature enables complete control over the pose brush origins in
case that is needed. Also, with this mode, the user can have a library
of base meshes with face sets already configured to get to the initial
pose as fast as possible.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7235
|
|
Previously, all vertices inside the brush radius were taken into account
equally when calculating the sculpt normal and area. This was causing
artifacts and unpredictable results with large brushes or meshes with
curvatures, as the strongest deformation point of all brushes is usually
in the center. By weighting the vertex normal and position towards the
center when sampling, all brushes should now behave in a more
predictable way in non-uniform surfaces.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6989
|
|
Last time I checked Face Sets were preserved in a more or less
predictable way when modifying the mesh with dyntopo. As it looks that
in some problems this may cause bugs and you can't see or use face sets
when modifying the topology of the mesh whith dyntopo active, it is
probably better to reset them when going from dyntopo to mesh. This way
you know that you are always going to get a predictable face sets state.
Reviewed By: jbakker
Maniphest Tasks: T74637
Differential Revision: https://developer.blender.org/D7099
|
|
|
|
Rename:
- WM_modalkeymap_add to WM_modalkeymap_ensure
- WM_modalkeymap_get to WM_modalkeymap_find
|
|
Also use sculpt prefix for SCULPT_CLAY_STABILIZER_LEN.
|
|
This implements a new mode in the Face Sets Create operator to create a
new face sets from the faces selection in edit mode. This can be used
when the user considers that the edit mode tools are more convenient for
a more precise control or a certain type of selection, like creating a
face set from a face loop.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7211
|
|
This operator initializes all face sets in the sculpt at once using
different mesh properties. It can create face sets by mesh connectivity,
material slots, face normals, UV seams, creases, sharp edges, bevel
weights and face maps.
For properties that are already in the faces, this is implemented as a
loop. Properties that depend on edge attributes use a similar operation
to sculpt flood fill, but using face adjacency instead of edge vertex
connectivity.
As Multires also stores the face sets in the base mesh, this should work
in the face sets Multires implementation without any changes.
This is implemented as a separate operator as this resets the visibility
and creates all face sets at once, while the create face set operator
creates a single face sets, leaving the rest of the face sets in the
mesh as they are.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7209
|
|
This implements the Surface Smooth Brush as a mode inside the Smooth tool,
which uses the HC algorithm from "Improved Laplacian Smoothing of Noisy Surface Meshes".
Comparted to the regular smooth brush with laplacian smooth, this brush removes
the surface while preserving the volume of the object.
The smooth result can be controlled by tweaing the original shape preservation,
displacement and iteration count.
The same surface smooth operation is also available as a mesh filter.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7057
|
|
SCULPT_FACE_SET_NONE default value is 0 and it is rendered hidden, so
the invert sign operation to show it was not working. Now the show all
function sets this face set to ID 1 before setting its sign.
I also refactored this check in gpu_buffers.
Not related to the reported issue, but the mesh in attached contains non
manifold geometry with hidden loose vertices, so the visibility state
was not syncing correctly to those vertices. Now the toggle operators
checks the current visibility only on the face sets, so no manifold
vertices are ignored (as they are in the rest of operations in sculpt
mode).
Reviewed By: jbakker
Maniphest Tasks: T74780
Differential Revision: https://developer.blender.org/D7188
|
|
This fixes multiple issues:
- Adds tag to update shading when changing vertex visibiliyt. This makes the mesh visibility update when the operator ends.
- Sync vertex to face sets no longer requires the pmap, so it does not crash. (Maybe we can initialize the pmap on undo to avoid these problems in the future).
- Sync vertex to face sets now works in a coherent way with the rest of visibility operations. Hide Box and Hide mask now sync the visibility changes to the face sets, so the all the operations are now getting a correct visibility state.
Reviewed By: brecht
Maniphest Tasks: T74761
Differential Revision: https://developer.blender.org/D7187
|
|
This checks that the distance of the current positions of two connected
vertices is not 0 before calculating the correction vectors for those
vertices.
Reviewed By: jbakker
Maniphest Tasks: T74808
Differential Revision: https://developer.blender.org/D7184
|
|
When using Face Sets to mask the mesh filter the pmap needs to be
initialized to check the face sets of each vertex, otherwise it will
crash because it is null.
Probably now we should just initalize the pmap when building the PBVH as
almost all tools need it, so we can avoid these crashes in the future.
Reviewed By: jbakker
Maniphest Tasks: T75089
Differential Revision: https://developer.blender.org/D7236
|
|
|
|
|
|
Issues exposed by 'bl_run_operators.py' utility.
|
|
|
|
This makes it work again at least for the non-UDIM case. For UDIM it's not
great still but I'll consider that a known limitation. A proper solution is
probably to find the closest tile at the start of the stroke and then only
paint in that one tile for the rest of the stroke.
|
|
Contributed by luzpaz.
Differential Revision: https://developer.blender.org/D7133
|
|
|
|
Both the MS headers and blender headers define the HKEY
which gives all kind of inclusion order issues.
This diff renames all *KEY constants to EVT_*KEY to resolve
this conflict.
Reviewed By: brecht , dfelinto
Differential Revision: http://developer.blender.org/D7164
|
|
This check box alters how weights are displayed and painted,
similar to Multi Paint, but in a different way. Specifically,
weights are presented as if all locked vertex groups were
deleted, and the remaining deform groups normalized.
The new feature is intended for use when balancing weights within
a group of bones while all others are locked. Enabling the option
presents weight as if the locked bones didn't exist, and their
weight was proportionally redistributed to the editable bones.
Conversely, the Multi-Paint feature allows balancing a group of
bones as a whole against all unselected bones, while ignoring
weight distribution within the selected group.
This mode also allows temporarily viewing non-normalized weights
as if they were normalized, without actually changing the values.
Differential Revision: https://developer.blender.org/D3837
|
|
NOTE: While most of the milestone 1 goals are there, a few smaller features and
improvements are still to be done.
Big picture of this milestone: Initial, OpenXR-based virtual reality support
for users and foundation for advanced use cases.
Maniphest Task: https://developer.blender.org/T71347
The tasks contains more information about this milestone.
To be clear: This is not a feature rich VR implementation, it's focused on the
initial scene inspection use case. We intentionally focused on that, further
features like controller support are part of the next milestone.
- How to use?
Instructions on how to use this are here:
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/How_to_Test
These will be updated and moved to a more official place (likely the manual) soon.
Currently Windows Mixed Reality and Oculus devices are usable. Valve/HTC
headsets don't support the OpenXR standard yet and hence, do not work with this
implementation.
---------------
This is the C-side implementation of the features added for initial VR
support as per milestone 1. A "VR Scene Inspection" Add-on will be
committed separately, to expose the VR functionality in the UI. It also
adds some further features for milestone 1, namely a landmarking system
(stored view locations in the VR space)
Main additions/features:
* Support for rendering viewports to an HMD, with good performance.
* Option to sync the VR view perspective with a fully interactive,
regular 3D View (VR-Mirror).
* Option to disable positional tracking. Keeps the current position (calculated
based on the VR eye center pose) when enabled while a VR session is running.
* Some regular viewport settings for the VR view
* RNA/Python-API to query and set VR session state information.
* WM-XR: Layer tying Ghost-XR to the Blender specific APIs/data
* wmSurface API: drawable, non-window container (manages Ghost-OpenGL and GPU
context)
* DNA/RNA for management of VR session settings
* `--debug-xr` and `--debug-xr-time` commandline options
* Utility batch & config file for using the Oculus runtime on Windows.
* Most VR data is runtime only. The exception is user settings which are saved
to files (`XrSessionSettings`).
* VR support can be disabled through the `WITH_XR_OPENXR` compiler flag.
For architecture and code documentation, see
https://wiki.blender.org/wiki/Source/Interface/XR.
---------------
A few thank you's:
* A huge shoutout to Ray Molenkamp for his help during the project - it would
have not been that successful without him!
* Sebastian Koenig and Simeon Conzendorf for testing and feedback!
* The reviewers, especially Brecht Van Lommel!
* Dalai Felinto for pushing and managing me to get this done ;)
* The OpenXR working group for providing an open standard. I think we're the
first bigger application to adopt OpenXR. Congratulations to them and
ourselves :)
This project started as a Google Summer of Code 2019 project - "Core Support of
Virtual Reality Headsets through OpenXR" (see
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/).
Some further information, including ideas for further improvements can be found
in the final GSoC report:
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/Final_Report
Differential Revisions: D6193, D7098
Reviewed by: Brecht Van Lommel, Jeroen Bakker
|
|
active object exists
Fix crash when the operator search is used while no active object exists. The cause of the issue is an attempt to dereference `ob` when it is `NULL`. Therefore this patch checks the return value of `SCULPT_mode_poll()` first, to ensure that `ob` isn't `NULL`.
Reviewed By: pablodp606
Maniphest Tasks: T74838
Differential Revision: https://developer.blender.org/D7156
|
|
Small UX fix. When hidding everything but the active face set with H,
the last stroke lotation center can be in a part of the model that is
hidden, so viewport navigation becomes confusing until you start a new
stroke on the visible face set. Now the viewport navigation rotation
center is updated to the active vertex when using a visibility operation
that uses it, so it always rotates using the visible face set as the
origin.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7137
|
|
|
|
If one of the faces connected to a vertex is hidden in the face sets, we
can assume that the vertex is part of a boundary edge, so it should be
cosidered like that in all automasking and edge detection functions.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7126
|
|
The idea of the visibility system is that tools should behave like
hidden vertices do not exist, so the flood fill operation should ignore
hidden vertices for all operators.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7125
|
|
The face set ID is sequential, so implementing this was straightforward.
Suggested by Jeroen Bakker
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7123
|
|
The face_set_set function which sets a face sets given a vertex index
can ignore all modifications to hidden face sets, so we can skip all
vertex visibility checks outside that function. This makes the code
faster, simpler and fixes multiple bugs.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7122
|
|
colors
The previous solution was also working fine as the white face set has no
meaning, but now it is a little bit more random. Also, bigger face sets
have more chance of getting the white color.
Reviewed By: jbakker
Maniphest Tasks: T74646
Differential Revision: https://developer.blender.org/D7111
|
|
The mesh provided in the report has 0 area faces and overlapping
vertices, causing the relax code to fail when calculating the plane to
constraint the vertex movement. Now it works fine both in the brush and
in the mesh filter.
Reviewed By: jbakker
Maniphest Tasks: T74648
Differential Revision: https://developer.blender.org/D7109
|
|
If the relax mesh filter was used on a non manifold mesh with open
boundaries, all the vertices were relaxed and the mesh was shrinking.
This was an unintended behavior that was making the filter unusable with
these meshes.
The mesh filter is now initializing an automasking buffer using the same
boundary automasking function from the brush code. Now edges are
preserved and the relax filter works as it should.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7097
|
|
The poll function was not checking the paint pointer.
|
|
Reviewers: pablodp606
Differential Revision: https://developer.blender.org/D7095
|
|
|
|
All sculpt operators and brushes need to use ID_RECALC_SHADING even when
PBVH rendering is not used.
|
|
Caused by the introduction of UDIM (rBc30d6571bb47).
We need to make sure the tiles ImageUser is set up correctly [especially
the framenr], otherwise BKE_image_acquire_ibuf() and friends will fail
to find the correct ImBuf.
Also instead of initializing a minimal BKE_imageuser_default, now use
an appropriate ImageUser if avaliable and pass this around (instead of
just the tile_number). 2D painting can reuse the Image Editor ImageUser,
for 3D painting we still rely on a default ImageUser in most places, but
at least set the framenr correctly].
This also fixes crashes when doing image operations such as inverting or
resizing on images in a sequence in the Image Editor.
This also fixes color sampling (S) from the 3DView going wrong for image
sequences (would fallback to OpenGL sampling because an ImBuf could not
be found).
Maniphest Tasks: T74425
Differential Revision: https://developer.blender.org/D7022
|
|
I could not reproduce the issue, but it looks like it was produced by
this division by 0. In any case, the code here was wrong.
Reviewed By: jbakker
Maniphest Tasks: T74354
Differential Revision: https://developer.blender.org/D6987
|
|
This automasking option protects the open boundary edges of the mesh from the brush deformation. This is needed to sculpt cloths and it works nicely with the cloth brush.
It has a Propagation Steps property that controls the falloff of the mask from the edge.
Limitations:
- The automask is recalculated at the beginning of each stroke, creating a little bit of lag in high poly meshes, but it is not necessary. This can be fixed in the future by caching the edge distances, increasing a little bit the complexity of the code.
- The boundary vertex detection in meshes is not ideal and it fails with triangulated geometry, but it is the same as in the smooth brush. After fixing this, we should refactor the smooth brush to use the API and let the automasking option manually control the affected vertices.
- It does not work in Multires (it needs to be implemented in the API). The smooth brush in Multires is also not making boundary vertices.
- The falloff has a visible line artifact on grid patterns. We can smooth the final automasking factors several iterations, but it will make the initialization much slower. This can also be added in the future if we decided to cache the distances.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6705
|
|
This introduces a variable to store a face set ID which is going to be
rendered white. When initializing a mesh or randomizing the colors, this
variable gets updated to always render a white face set. This way the
face set overlay can be enabled without adding colors to the mesh if
face sets are not in use. After creating the first face set, new colors
are generated randomly like usual.
The face set stored as default does not have any special meaning for
tools or brushes, it just affects the rendering color.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7035
|
|
This enables a relax operation that works only on face sets boundaries,
which smooths the jagged edges that are produced when painting or
expanding face sets by sliding the topology without affecting the shape
of the mesh. This has many uses in hard surface sculpting for things
like sculpting panels or smoothing surfaces. It can also help when
working with remeshed topology as it makes the face sets looks better
and more organized if needed.
The operation is implemented as an Shift smooth in the Draw Face sets
tool, similar to the Slide/Relax tool.
The same operation is also available in the mesh filter to smooth all
the face sets boundaries uniformly or to smooth the face set under the
cursor with the Use Face Sets option.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7034
|
|
The cloth brush was not using the automasking values when calculating
the mask value on each vertex.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7083
|
|
Create face sets by visibility needs to check if all face sets of a
vertex are visible to set the new face set. I renamed the functions to
make this more cleare in the API.
I also added a visibility check when creating by mask to avoid modifying
hidden areas.
Reviewed By: brecht
Maniphest Tasks: T74499
Differential Revision: https://developer.blender.org/D7048
|
|
Hardness is now a property implemented for all brushes, so this is no
longer needed.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7078
|
|
The operator was resetting the mask data when cancelling instead of the
face set data, so it was crashing because mask data was not available
when starting the operator in expand face set mode.
Reviewed By: brecht
Maniphest Tasks: T74492
Differential Revision: https://developer.blender.org/D7043
|
|
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
|
|
While it might be handy to have type-less functionality which is
similar to how C++ math is implemented it can not be easily achieved
with just preprocessor in a way which does not have side-effects on
wrong usage.
There macros where often used on a non-trivial expression, and there
was at least one usage where it was causing an actual side effect/bug
on Windows (see change around square_f(sh[index++]) in studiolight.c).
For such cases it is handy to have a function which is guaranteed to
have zero side-effects. The motivation behind actually removing the
macros is that there is already a way to do similar calculation. Also,
not having such macros is a way to guarantee that its usage is not
changed in a way which have side-effects and that it's not used as an
inspiration for cases where it should not be used.
Differential Revision: https://developer.blender.org/D7051
|
|
Missing changes from one of the renamings of the initial face sets
patch.
Reviewed By: brecht
Maniphest Tasks: T74513
Differential Revision: https://developer.blender.org/D7054
|
