Age | Commit message (Collapse) | Author |
|
Return the correct sculpt level in BKE_multires_sculpt_level_get and
enable the property in the UI
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7575
|
|
|
|
A Colorband's CBData color **is not** considered `PROP_COLOR_GAMMA`.
A Brushes color **is** considered `PROP_COLOR_GAMMA`.
(PROP_COLOR_GAMMA is used for colors which would be color managed before
display, could be renamed to something better once...)
This leads to different rgb values in ColorBand.CBData of br->gradient
and brush->rgb for seemingly identical colors. (this is because color
pickers do differently in case block->is_color_gamma_picker/
ui_but_is_color_gamma)
Now it looks like `paint_brush_color_get` is expected to return a color
in sRGB (according to @jbakker this is for legacy reasons) so we need to
run the colorband colors through linear -> sRGB.
It might very well be the case that a much deeper cleanup in this area
is needed, this is just a fix to get gradient brush colors
consistent again...
Maniphest Tasks: T75985
Differential Revision: https://developer.blender.org/D7501
|
|
This patch enables TBB as the default task scheduler. TBB stands for Threading Building Blocks and is developed by Intel. The library contains several threading patters. This patch maps blenders BLI_task_* function to their counterpart. After this patch we can add more patterns. A promising one is TBB:graph that can be used for depsgraph, draw manager and compositor.
Performance changes depends on the actual hardware. It was tested on different hardwares from laptops to workstations and we didn't detected any downgrade of the performance.
* Linux Xeon E5-2699 v4 got FPS boost from 12 to 17 using Spring's 04_010_A.anim.blend.
* AMD Ryzen Threadripper 2990WX 32-Core Animation playback goes from 9.5-10.5 FPS to 13.0-14.0 FPS on Agent 327 , 10_03_B.anim.blend.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D7475
|
|
|
|
Should be no functional changes.
|
|
|
|
Without this flag the PBVH won't update taking the modified vertices
into account.
Reviewed By: brecht
Maniphest Tasks: T75778
Differential Revision: https://developer.blender.org/D7453
|
|
In the vertex iterator vd.index should always be used. I probably
introduced this in a refactor.
Reviewed By: jbakker
Maniphest Tasks: T75766
Differential Revision: https://developer.blender.org/D7446
|
|
In the main mesh filter loop vertex that do not have the active face set
are skipped, so in the following surface smooth displacement loop these
vertices were deformed using an uninitialized laplacian_disp value.
Now the main loop initializes the laplacian_disp for all vertices and
the deformation based on face sets is skipped in the second loop.
Reviewed By: jbakker
Maniphest Tasks: T75662
Differential Revision: https://developer.blender.org/D7443
|
|
|
|
|
|
The Layer brush was in Blender before 2.81, when the sculpt API was
introduced. It had a huge amount of bugs and glitches which made it
almost unusable for anything but the most trivial cases. Also, it needed
some hacks in the code just to support the persistent base.
The brush was completely rewritten using the Sculpt API. It fulfills the
same use case as the old one, but it has:
- All previous artifacts fixed
- Simpler code
- Persistent base now works with multires thanks to the sculpt API
- Small cursor widget to preview the layer height
- More controllable and smoother strength and deformation
- More correct masking support
- More predictable invert support. When using persistent base, the brush invert mode resets to layer height 0, instead of jumping from +1 to -1. The brush can still be inverted in the brush direction property.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7147
|
|
This mesh filter sharpens and smooths the mesh based on its curvature,
resulting in pinching hard edges and polishing flat surfaces. It fixes
most of the artifacts of the voxel remesher and those produced when
sculpting hard surfaces and stylized models with creasing and flattening
brushes.
It needs and accumulate_displacement step before each filter iteration which
can't be multithreaded in an easy way (it would need something to sync the
threads when modifying the data of neighbors in a different node), but this
does not affect performance in a significant way.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7335
|
|
When using the shift-smooth mode, sculpt_update_cache_invariants is
changing the brush datablock of the paint session if it finds a brush
named "Smooth" (which is a huge hack the brush management project should
try to solve). This is done after the PaintStroke data in the modal
operator is created, which holds a reference to the active brush in the
paint session that was active when the operator started. Because of
this, the StrokeCache was getting the correct smooth brush values but
the paint modal operator was applying the wrong ones from the previous
brush. This was causing the smooth brush behaves unpredictably depending
on the current active brush.
This patch updates the brush in PaintStroke on each modal callback, so
it always gets the values from the current active brush in the Paint
Session.
The way brush switching works and a way to make it more flexible needs
to be discussed in the future as part of the brush management project.
The default smooth brush parameters and curves will probably need to
be updated after this change, as previously they were set using an
incorrect behavior.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7354
|
|
All tools should now use the API function to get the active face set
directly from the face under the cursor.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7362
|
|
The operator was disabled when it was added because Face Sets were not
supported in Multires.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7312
|
|
Geometry that was just added to sculpt mode has the SCULPT_FACE_SET_NONE
assigned, so it was hidden by default. By doing this when entering
sculpt mode a new visible face set is created for it, making it easier
to isolate it again if you want to do further tweaking with the sculpt
tools.
Also, this also fixes the issue that may happen when changing the mesh
visibility in edit mode. Now visibility changes done outside sculpt mode
are stored in the face sets when entering sculpt mode, so mesh
visibility should stay the same.
Reviewed By: jbakker
Maniphest Tasks: T75104
Differential Revision: https://developer.blender.org/D7249
|
|
The idea is to push both base mesh geometry and PBVH coordinates
so it is possible to undo everything without loosing data which was
not flushed from sculpt session to base mesh.
It is possible do memory optimization to avoid push custom data
layers which are not touched by operator, but before doing that
better to ensure this is a correct and working approach.
Differential Revision: https://developer.blender.org/D7381
|
|
- The word 'Flip' is incorrect. 'Swap' or 'Switch' is correct.
- In Blender, we use 'primary' & 'secondary' color swatches, not 'foreground' and 'background'
|
|
Tasks: move priority from task to task pool {rBf7c18df4f599fe39ffc914e645e504fcdbee8636}
Tasks: split task.c into task_pool.cc and task_iterator.c {rB4ada1d267749931ca934a74b14a82479bcaa92e0}
Differential Revision: https://developer.blender.org/D7385
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
|
|
|
|
|
|
Part of T74432.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
Follow up of b2ee1770d4c3 and 10c2254d412d, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
Differential Revision: https://developer.blender.org/D7018
|
|
Continuation of b2ee1770d4c3, now non-single word variables are also
renamed.
Part of T74432.
Also ran clang-format on affected files.
|
|
Spatial & topology mirror table each used a single function
taking a char as an identifier.
Split these into begin/end/lookup functions.
|
|
|
|
|
|
This adds the automasking options to the Sculpt Tool options in a way
that they affect all brushes. This is more convenient when working with
some of these options while switching brushes as they don't need to be
enabled/disabled per brush.
An automasking option is enabled if it is enabled in the brush or in the
sculpt options.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7304
|
|
With this brush option it is possible to mask the boundary vertices of
all face sets. This is especially useful in the cloth brush, where face
sets can be used to simulate seams between different patches of cloth
and produce different patterns and effects.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7230
|
|
Allows to know what level sculpting has been done after the value has
been changed in the MultiresModifierData.
No functional changes, just preparing code to have everything needed
for propagation undo.
Differential Revision: https://developer.blender.org/D7307
|
|
Before this change it was not possible to have base geometry
and grid coordinates to be stored in the same undo step.
Differential Revision: https://developer.blender.org/D7298
|
|
This fixes the following issues:
- Previously, the face set from the active vertex was used directly. Vertices always return the most recently created face set, so in some cases there may be some face sets that were not possible to select as active. Now the active face set is set in the ray intersection, so it always matches the face under the cursor.
- When drawing face sets they were set per vertex, so it was not possible to paint one face at a time. Now face sets are painted per poly when using the brush on meshes, testing the distance to the center of each poly.
- The code for the active vertex on PBVH_GRIDS was not correct, so I also fixed that to test if everything was working correctly.
{F8441699}
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7303
|
|
The brush was allocating new memory for storing the displacemnets at the
beginning of each stroke step and not freeing them.
Reviewed By: jbakker
Maniphest Tasks: T75121
Differential Revision: https://developer.blender.org/D7254
|
|
As the main use case of this feature is to work with cloth, using this
curve makes more sense than a smoothstep to simulate cloth tension near
the edges.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7262
|
|
Should make it a bit more clear overview of what is going on in this
module. While some of the details might still be missing, having some
sort of top-level overview is better than nothing.
Differential Revision: https://developer.blender.org/D7300
|
|
Made it so grids array is properly allocated when first node in the
undo list does not contain grid data.
Differential Revision: https://developer.blender.org/D7299
|
|
Made it so there is a single UNDO node in the list which has
both original and modified mesh state.
Makes it easier to achieve "interleaved" undo nodes stored in
the undo step (as opposite of either storing geometry or other
data).
Should be no functional changes, just preparing for an upcoming
work to support undo of operation like Apply Base.
Differential Revision: https://developer.blender.org/D7290
|
|
|
|
This implements the Sculpt Mode API functions needed for Face Sets and
visibility management for PBVH_GRIDS. No major changes were needed in
the operators and the sculpt mode code. This implementation stores the
face sets in the base mesh, so faces created in higher subdivision
levels can't be modified individually. Also, we are not checking for
multiple face sets per vertex (that can be added in the future), so
relax tools don't work yet. The rest of the features (paint, undo,
visibility operators..) work as expected.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7168
|
|
|