Age | Commit message (Collapse) | Author |
|
|
|
|
|
Practically all access to enum data is read-only.
|
|
Cyclic extrapolation is implemented as an f-curve modifier, so this
technically violates abstraction separation and is something of a hack.
However without such behavior achieving smooth looping with cyclic
extrapolation is extremely cumbersome.
The new behavior is applied when the first modifier is Cyclic
extrapolation in Repeat or Repeat with Offset mode without
using influence, repeat count or range restrictions.
This change in behavior means that curve handles have to be updated
when the modifier is added, removed or its options change. Due to the
way code is structured, it seems it requires a helper link to the
containing curve from the modifier object.
Reviewers: aligorith
Differential Revision: https://developer.blender.org/D2783
|
|
Replace iroundf with round_fl_to_int, add other types
|
|
This is a good point to change this as grease-pencil-v2 branch was just merged, so I hope merge conflicts with other branches are minimal.
|
|
This commit introduces a scale factor setting for scaling all keyframe indicators
in the Dopesheet Editor up/down, in order to make them easier to select. It is perhaps
most useful for keyframe types which are usually indicated using smaller keyframes
(e.g. breakdown), which may get tricky to quickly select.
|
|
FCurve evaluation depended on FCurve.curval, which isn't threadsafe.
Now only use this value for debug display,
and pass the value instead of storing in the FCurve for all but debug-display.
|
|
Simply apply same minimal range as in graph editor when we get a zero one from keyframes.
|
|
NLA/Timeline Support
* Reshuffled code for existing "View Frame" implementations, and removed leftover
comment from some of the the copy-and-paste used to build it.
* Added support for this operator in the NLA and Timeline
|
|
copy-paste buffer free callbacks
|
|
To make it easier for animators working in a multipass pose-to-pose workflow
when inserting breakdown keyframes and so forth, it is now possible to specify
the "type" of keyframe being created (i.e. the colour of the keyframe, when drawn
in the Dope Sheet).
Usage:
1) Choose the type of keyframe ("Keyframe", "Breakdown", "Extreme", etc.) from
the new dropdown located between the AutoKeying and KeyingSet widgets on the
timeline header.
2) Insert keyframes
3) Rejoyce that your newly created keyframes have now been coloured for you already
in the DopeSheet.
Todo:
* Look into a way of using the actual keyframe colours (from the theme) for the icons
of these types.
|
|
This may have resulted in situations where the order of GP keyframes was
incorrect (leading to some frames not being able to be found), or in some
redraw problems when trying to delete GP keyframes (that I was getting earlier,
but can't seem to reproduce now)
TODO: We now need to hook up a proper api to do the GP key sorting
|
|
Bezier handles getting stretched unreasonably
Patch by Alexander Gavrilov (angavrilov)
Reviewed by Joshua Leung (aligorith)
|
|
|
|
It will create blank keyframes, or copies of the prevailing keyframe,
depending on whether "Additive Drawing" is enabled or not.
|
|
This commit merges all the work done in the GPencil_Editing_Stage3 branch
as of ef2aecf2db981b5344e0d14e7f074f1742b0b2f7 into master. For more details
about the changes that this brings, see the WIP release notes:
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.77/GPencil
|
|
Definitions could shadow local vars.
|
|
get_keyframe_extents() would add an extra frame in case of mono-key fcurves in selected set...
Now do the 'not same start/end frames' check later, and also use floor/ceil instead of round
(we want to start at frame 3 if first key is at frame 3.8, reversed-same goes for end frame).
|
|
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
|
|
Basically it's a clean keyframes tool, but also removes a channel if the
only remaining keyframe has the default value only and is not used by
drivers or generative modifiers.
It's was used to help with performance of keyframe-heavy scenes in
gooseberry.
Note, as always the curve left after the clean tool is used is not the
same as the original, so this tool is better used before doing custom
editing of fcurves and after initial keyframe insertion, to get rid
of any unwanted keyframes inserted while doing mass keyframe insertion
(by selecting all bones and pressing I for instance)
|
|
team.
There are 3 options here:
1) Keep range (previous behaviour)
2) Seconds - allows a specified offset in seconds around current frame
3) keyframes - zoom to include a number of keyframes around the cursor
Options 2 and 3 have their own properties to tweak the behaviour and all
options can be found in User Preferences->Interface under the 2D
viewports section.
Number 3 will probably need some refinement so commiting here for the
hwoozeberry team to test first.
|
|
editors.
Reporter used a hacky work-around by placing cursor at end of keyframe
range and doing ctrl-C ctrl-V repeatedly. This was working on 2.73 but
not anymore since the old selection is not kept.
Much better is to have duplication operator be repeatable. This commit
takes care of that.
|
|
scene frame, bound to numberpad zero.
|
|
|
|
|
|
* Insert Keyframe tool for Dopesheet/Graph Editors needed to be modified to
not try to resolve the paths for NLA Control Curves
* For now, the poll callback to get the "Active FCurve" also works when given
a NLA control curve. They're really the same in most cases, and this should
be fine until one of the channels does something funky.
|
|
Using the standard "FCurve" animchannel type didn't work that well for
the control FCurves on NLA Strips, as the paths would not resolve correctly,
and the indentation was wrong. Also, there would likely be issues down the
track with applying NLA mapping. Hence, it's easier to just create a separate
type for this case, and adapt the rest of the code to also consider these (todo).
|
|
DopeSheet mode
When the active object had no shapekey data, trying to create a new action from the
Shape Keys mode of the DopeSheet would crash. The segfault here was a silly regression
caused by my earlier Action Stashing work.
However, the old (pre-Action Stashing) code here also wasn't that great either.
While it didn't crash, it would still silently create a new action, even if that
could not get assigned/used anywhere. To prevent both of these problems from
happening again, I've added additional null checks, as well as beefing up the poll
callback here to forbid keyframing
|
|
|
|
|
|
|
|
default again
This commit modifies the "New Action" operator to always stash the old action
before it creates a new one. As a result, the old active action will now have
a proper user of sorts after the new one is created, preventing previously
created actions from being lost.
Now that the New operator does this, it can be used for the Action Editor header AND
NLA Editor (Animation Data Panel -> Active Action) again. The "stash and create"
operator is somewhat redundant at this point as a result.
|
|
and create new" operator
In constrast to the old "new" operator, this operator will stash the existing action
in the stack to prevent it from being lost. This situation isn't totally ideal yet,
since the NLA Editor still calls the old method.
|
|
|
|
Action Editor modes
|
|
different functions
This is also just as prep for the next step
|
|
function
|
|
This operator (the snowflake icon, beside the pushdown button on the Action Editor
header) adds the currently active action to the NLA stack in a muted track, then
creates + loads a new action ready to be populated with new keyframes.
Since the NLA is being used to hang on to all the actions here, no actions are
getting lost.
Usage Notes (there will be some additional tweaks to make this nicer):
* To preview different actions that have been "stashed", simply click the "Solo"
toggle for the track containing the action in question. Playing back the NLA will
now show the stashed track
* To edit a previously stashed action - simply enter tweakmode on it in the NLA
while the "Solo" toggle is enabled.
Todo:
* Add some more operators here to polish up the Action <-> NLA bridge to make the
layered and stash workflows smoother. Examples include some tools to easily
switch between the different actions layers in the stack, as well as making it
easier to get out of tweakmode (and sync up the action lengths)
* Review and cleanup the behaviour of the "new" operator here to avoid the old
problems that users were running into
* After the next release - Implement the full Action Libraries functionality, with
ways to bridge the stashed strips over to a full-blown library.
|
|
refuse to do anything
|
|
the NLA Stack
This commit exposes the "Push Down" button/functionality found in the NLA Editor
to the Action Editor, so that actions can be added NLA Stack from here too. The
main point of this for now is to make the whole layered-animation workflow nicer
more efficient, but not requiring the second editor be visible in common cases.
It also conveniently sets things up for the next few changes (already hinted at
here)...
|
|
(Note for the uninitiated looking at the diffs: this is very much *not* what
you're probably thinking right now, if you're looking at the line in
act_new_exec())
|
|
and graph editor.
This was a tricky commit that was not so straightforward to make work.
The information for bones is not easy to come by in the animation curves,
however we do have some string manipulation tricks to make it happen.
Testing in gooseberry worked for the rigs there, commiting to master now
|
|
This merge-commit brings in a number of new features and workflow/UI improvements for
working with Grease Pencil. While these were originally targetted at improving
the workflow for creating 3D storyboards in Blender using the Grease Pencil,
many of these changes should also prove useful in other workflows too.
The main highlights here are:
1) It is now possible to edit Grease Pencil strokes
- Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions
to enter "Stroke Edit Mode". In this mode, many common editing tools will
operate on Grease Pencil stroke points instead.
- Tools implemented include Select, Select All/Border/Circle/Linked/More/Less,
Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete.
- Proportional Editing works when using the transform tools
2) Grease Pencil stroke settings can now be animated
NOTE: Currently drivers don't work, but if time allows, this may still be
added before the release.
3) Strokes can be drawn with "filled" interiors, using a separate set of
colour/opacity settings to the ones used for the lines themselves.
This makes use of OpenGL filled polys, which has the limitation of only
being able to fill convex shapes. Some artifacts may be visible on concave
shapes (e.g. pacman's mouth will be overdrawn)
4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing
has been added which draws strokes as a series of screen-aligned discs.
While this was originally a partial experimental technique at getting better
quality 3D lines, the effects possible using this technique were interesting
enough to warrant making this a dedicated feature. Best results when partial
opacity and large stroke widths are used.
5) Improved Onion Skinning Support
- Different colours can be selected for the before/after ghosts. To do so,
enable the "colour wheel" toggle beside the Onion Skinning toggle, and set
the colours accordingly.
- Different numbers of ghosts can be shown before/after the current frame
6) Grease Pencil datablocks are now attached to the scene by default instead of
the active object.
- For a long time, the object-attachment has proved to be quite problematic
for users to keep track of. Now that this is done at scene level, it is
easier for most users to use.
- An exception for old files (and for any addons which may benefit from object
attachment instead), is that if the active object has a Grease Pencil datablock,
that will be used instead.
- It is not currently possible to choose object-attachment from the UI, but
it is simple to do this from the console instead, by doing:
context.active_object.grease_pencil = bpy.data.grease_pencil["blah"]
7) Various UI Cleanups
- The layers UI has been cleaned up to use a list instead of the nested-panels
design. Apart from saving space, this is also much nicer to look at now.
- The UI code is now all defined in Python. To support this, it has been necessary
to add some new context properties to make it easier to access these settings.
e.g. "gpencil_data" for the datablock
"active_gpencil_layer" and "active_gpencil_frame" for active data,
"editable_gpencil_strokes" for the strokes that can be edited
- The "stroke placement/alignment" settings (previously "Drawing Settings" at the
bottom of the Grease Pencil panel in the Properties Region) is now located in
the toolbar. These were more toolsettings than properties for how GPencil got drawn.
- "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a
suggestion for an earlier discussion on developer.blender.org
- By default, the painting operator will wait for a mouse button to be pressed
before it starts creating the stroke. This is to make it easier to include
this operator in various toolbars/menus/etc. To get it immediately starting
(as when you hold down DKEy to draw), set "wait_for_input" to False.
- GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor
- Toolbar panels have been added to all the other editors which support these.
8) Pie menus for quick-access to tools
A set of experimental pie menus has been included for quick access to many
tools and settings. It is not necessary to use these to get things done,
but they have been designed to help make certain common tasks easier.
- Ctrl-D = The main pie menu. Reveals tools in a context sensitive and
spatially stable manner.
- D Q = "Quick Settings" pie. This allows quick access to the active
layer's settings. Notably, colours, thickness, and turning
onion skinning on/off.
|
|
Make the UI API more consistent and reduce confusion with some naming.
mainly:
- API function calls
- enum values
some internal static functions have been left for now
|
|
vertex in a fcurve.
|
|
|
|
|
|
|
|
This makes it easier for finding the active or first selected channel
(where actual data channels need to be favoured over expanders - which come
first), as previously, long switch statements were needed everytime.
|