| Age | Commit message (Collapse) | Author |
|---|
|
Was using a bunch of different spellings, mostly "data-block" though, so went with that one (would have been my #1 choice anyway ;) )
|
|
When WITH_INPUT_NDOF is disabled, 3D mouse handling code is removed
from:
- GHOST (was mostly done, finished the job)
- window manager
- various editors
- RNA
- keymaps
The input tab of user prefs does not show 3D mouse settings. Key map
editor does not show NDOF mappings.
DNA does not change.
On my Mac the compiled binary is 42KB smaller after this change. It
runs fine WITH_INPUT_NDOF on or off.
|
|
This is a good point to change this as grease-pencil-v2 branch was just merged, so I hope merge conflicts with other branches are minimal.
|
|
Now all consistent and using term "properties region" instead of "properties panel". Ideally we had a more generic operator for all those.
Fixes T49006.
|
|
Also allows us to get rid of a few _copy_ex() versions...
|
|
|
|
This commit introduces a scale factor setting for scaling all keyframe indicators
in the Dopesheet Editor up/down, in order to make them easier to select. It is perhaps
most useful for keyframe types which are usually indicated using smaller keyframes
(e.g. breakdown), which may get tricky to quickly select.
|
|
|
|
Adapted from the code for Grease Pencil (just like the whole mode was)
|
|
To get this working the least effort, I've had to expose the helper functions
used by the lasso and circle select keyframe-test callbacks (which are generic)
and expose them for use by the GP keyframe editing code too. Hopefully in time
we clean this all up and just write the code once to operate on "keyframes"
|
|
This only works in the Action and Dopesheet modes (which operate on FCurve keyframes).
Support for Grease Pencil and Mask Keyframes though is still pending.
|
|
handling).
This commit changes a lot of how IDs are handled internally, especially the unlinking/freeing
processes. So far, this was very fuzy, to summarize cleanly deleting or replacing a datablock
was pretty much impossible, except for a few special cases.
Also, unlinking was handled by each datatype, in a rather messy and prone-to-errors way (quite
a few ID usages were missed or wrongly handled that way).
One of the main goal of id-remap branch was to cleanup this, and fatorize ID links handling
by using library_query utils to allow generic handling of those, which is now the case
(now, generic ID links handling is only "knwon" from readfile.c and library_query.c).
This commit also adds backends to allow live replacement and deletion of datablocks in Blender
(so-called 'remapping' process, where we replace all usages of a given ID pointer by a new one,
or NULL one in case of unlinking).
This will allow nice new features, like ability to easily reload or relocate libraries, real immediate
deletion of datablocks in blender, replacement of one datablock by another, etc.
Some of those are for next commits.
A word of warning: this commit is highly risky, because it affects potentially a lot in Blender core.
Though it was tested rather deeply, being totally impossible to check all possible ID usage cases,
it's likely there are some remaining issues and bugs in new code... Please report them! ;)
Review task: D2027 (https://developer.blender.org/D2027).
Reviewed by campbellbarton, thanks a bunch.
|
|
FCurve evaluation depended on FCurve.curval, which isn't threadsafe.
Now only use this value for debug display,
and pass the value instead of storing in the FCurve for all but debug-display.
|
|
|
|
This commit adds some of the initial support for a properties region in the
Action Editor. There are currently no panels to display, as there is still
a lot of work required to port over the required internal architecture to
support the panels seen in the Graph Editor.
|
|
Simply apply same minimal range as in graph editor when we get a zero one from keyframes.
|
|
NLA/Timeline Support
* Reshuffled code for existing "View Frame" implementations, and removed leftover
comment from some of the the copy-and-paste used to build it.
* Added support for this operator in the NLA and Timeline
|
|
copy-paste buffer free callbacks
|
|
To make it easier for animators working in a multipass pose-to-pose workflow
when inserting breakdown keyframes and so forth, it is now possible to specify
the "type" of keyframe being created (i.e. the colour of the keyframe, when drawn
in the Dope Sheet).
Usage:
1) Choose the type of keyframe ("Keyframe", "Breakdown", "Extreme", etc.) from
the new dropdown located between the AutoKeying and KeyingSet widgets on the
timeline header.
2) Insert keyframes
3) Rejoyce that your newly created keyframes have now been coloured for you already
in the DopeSheet.
Todo:
* Look into a way of using the actual keyframe colours (from the theme) for the icons
of these types.
|
|
on Summary Tracks
|
|
This may have resulted in situations where the order of GP keyframes was
incorrect (leading to some frames not being able to be found), or in some
redraw problems when trying to delete GP keyframes (that I was getting earlier,
but can't seem to reproduce now)
TODO: We now need to hook up a proper api to do the GP key sorting
|
|
|
|
TweakMode
When in TweakMode on NLA strips that had an offset, it was not possible to select
those keyframes in the Summary Channel in the Dope Sheet.
The main gist of it is that the current code is from before the summary track was
introduced, and so could assume that ANIM_nla_mapping_get() would work for all channels
present. Thus, simply converting the clicked frame to nla-mapped time once would be
enough. However, for summary channels, nla-mapping_get() doesn't do anything, since
we can potentially include keyframes from several different objects!
|
|
Bezier handles getting stretched unreasonably
Patch by Alexander Gavrilov (angavrilov)
Reviewed by Joshua Leung (aligorith)
|
|
on the current frame range
This brings the dopesheet more in line with the NLA and Graph Editors, where
similar initial ranges were also used. The benefit is that it should save
animators a small amount of time getting the dopesheet timeline into the
right zoom level before starting work.
|
|
While SCons building system was serving us really good for ages it's no longer
having much attention by the developers and started to become quite a difficult
task to maintain.
What's even worse -- there started to be quite serious divergence between SCons
and CMake which was only accumulating over the releases now. The fact that none
of the active developers are really using SCons and that our main studio is also
using CMake spotting bugs in the SCons builds became quite a difficult task and
we aren't always spotting them in time.
Meanwhile CMake became really mature building system which is available on every
platform we support and arguably it's also easier and more robust to use.
This commit includes:
- Removal of actual SCons building system
- Removal of SCons git submodule
- Removal of documentation which is stored in the sources and covers SCons
- Tweaks to the buildbot master to stop using SCons submodule
(this change requires deploying to the server)
- Tweaks to the install dependencies script to skip installing or mentioning
SCons building system
- Tweaks to various helper scripts to avoid mention of SCons folders/files
as well
Reviewers: mont29, dingto, dfelinto, lukastoenne, lukasstockner97, brecht, Severin, merwin, aligorith, psy-fi, campbellbarton, juicyfruit
Reviewed By: campbellbarton, juicyfruit
Differential Revision: https://developer.blender.org/D1680
|
|
|
|
It will create blank keyframes, or copies of the prevailing keyframe,
depending on whether "Additive Drawing" is enabled or not.
|
|
This commit merges all the work done in the GPencil_Editing_Stage3 branch
as of ef2aecf2db981b5344e0d14e7f074f1742b0b2f7 into master. For more details
about the changes that this brings, see the WIP release notes:
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.77/GPencil
|
|
Apparently this is the result of some sloppiness during 2.5 project and since then it confused people who were trying to understand the area-region relation (myself included).
Sorry if this causes merge conflicts for anyone, but at some point we really had to do it :/
|
|
Definitions could shadow local vars.
|
|
Since it also involves usercount manipulation, safer and cleaner to do it in BKE_library...
|
|
We have callbacks for that, they also do some checks and help ensure things are done
correctly. Only place where this is assumed not true is blenloader (since here we
may affect refcount of library IDs as well...).
|
|
get_keyframe_extents() would add an extra frame in case of mono-key fcurves in selected set...
Now do the 'not same start/end frames' check later, and also use floor/ceil instead of round
(we want to start at frame 3 if first key is at frame 3.8, reversed-same goes for end frame).
|
|
By popular request, restored the ability to shift-click on the X (unlink) button
to unlink the action (from the active action slot), clear the Fake User, and
also remove the NLA-stashed copy (only works for the current object/NLA stack though).
|
|
This brings them into line with other editing tools (e.g. object/mesh selection),
and should help fix bugs like T45374 and T45846
|
|
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
|
|
The issue was caused by the following construction:
def = env['SOMETHING']
defs.append('SOMETHING_MORE')
Since first assignment was actually referencing environment option it was totally
polluted hawing weird and wonderful side effects on all other areas of Blender.
|
|
Basically it's a clean keyframes tool, but also removes a channel if the
only remaining keyframe has the default value only and is not used by
drivers or generative modifiers.
It's was used to help with performance of keyframe-heavy scenes in
gooseberry.
Note, as always the curve left after the clean tool is used is not the
same as the original, so this tool is better used before doing custom
editing of fcurves and after initial keyframe insertion, to get rid
of any unwanted keyframes inserted while doing mass keyframe insertion
(by selecting all bones and pressing I for instance)
|
|
team.
There are 3 options here:
1) Keep range (previous behaviour)
2) Seconds - allows a specified offset in seconds around current frame
3) keyframes - zoom to include a number of keyframes around the cursor
Options 2 and 3 have their own properties to tweak the behaviour and all
options can be found in User Preferences->Interface under the 2D
viewports section.
Number 3 will probably need some refinement so commiting here for the
hwoozeberry team to test first.
|
|
venomgfx was complaining that having it do the popup everytime was too intrusive,
so demoting it to just showing the warning in the header.
|
|
To help make it more convenient to edit stashed actions, Shift-Tab
(i.e. holding down the Shift key, which "tabbing" into tweakmode as
usual to edit the action referenced by the active NLA strip) now flags
the NLA Track that the strip occupies as being "solo" too.
This allows you to use the NLA to select a stashed action, then Shift-Tab
to start editing it without any other actions in the NLA stack interfering.
Like the "Next/Previous Layer" tools in the Action Editor, this is designed
to help with checking on stashed actions.
|
|
editors.
Reporter used a hacky work-around by placing cursor at end of keyframe
range and doing ctrl-C ctrl-V repeatedly. This was working on 2.73 but
not anymore since the old selection is not kept.
Much better is to have duplication operator be repeatable. This commit
takes care of that.
|
|
scene frame, bound to numberpad zero.
|
|
O key is bound to proportional editing.
|
|
|
|
|
|
|
|
There are a few things here which are not so nice:
* Position of proportional edit circle is not centered on data
(difficult to predict positions here since those are completely custom,
will probably be positioned at center of area later instead)
* Result is flushed to curve handles only at the end of the transform,
so if people have the graph editor open they will see handles lagging behind.
|
|
|
