Age | Commit message (Collapse) | Author |
|
team.
There are 3 options here:
1) Keep range (previous behaviour)
2) Seconds - allows a specified offset in seconds around current frame
3) keyframes - zoom to include a number of keyframes around the cursor
Options 2 and 3 have their own properties to tweak the behaviour and all
options can be found in User Preferences->Interface under the 2D
viewports section.
Number 3 will probably need some refinement so commiting here for the
hwoozeberry team to test first.
|
|
venomgfx was complaining that having it do the popup everytime was too intrusive,
so demoting it to just showing the warning in the header.
|
|
To help make it more convenient to edit stashed actions, Shift-Tab
(i.e. holding down the Shift key, which "tabbing" into tweakmode as
usual to edit the action referenced by the active NLA strip) now flags
the NLA Track that the strip occupies as being "solo" too.
This allows you to use the NLA to select a stashed action, then Shift-Tab
to start editing it without any other actions in the NLA stack interfering.
Like the "Next/Previous Layer" tools in the Action Editor, this is designed
to help with checking on stashed actions.
|
|
editors.
Reporter used a hacky work-around by placing cursor at end of keyframe
range and doing ctrl-C ctrl-V repeatedly. This was working on 2.73 but
not anymore since the old selection is not kept.
Much better is to have duplication operator be repeatable. This commit
takes care of that.
|
|
scene frame, bound to numberpad zero.
|
|
O key is bound to proportional editing.
|
|
|
|
|
|
|
|
There are a few things here which are not so nice:
* Position of proportional edit circle is not centered on data
(difficult to predict positions here since those are completely custom,
will probably be positioned at center of area later instead)
* Result is flushed to curve handles only at the end of the transform,
so if people have the graph editor open they will see handles lagging behind.
|
|
|
|
(NLA buttons support to come)
After looking into this more carefully, I've found that we do in fact need a dedicate
operator to add some custom logic when trying to unlink an action from the editor/datablocks.
Specifically, this new operator does the following:
1) When in Tweak Mode, it shouldn't be possible to unlink the active action,
or else, everything turns to custard.
2) If the Action doesn't have any other users, the user should at least get
a warning that it is going to get lost.
3) We need a convenient way to exit Tweak Mode from the Action Editor
4) If none of the above apply, we can just unlink normally
This commit implements this for the Action Editor, with stubs for the NLA Editor too.
Those will be fixed next.
|
|
|
|
When renaming animation channels, the old names are no longer drawn behind the
text boxes anymore. This used to cause problems if the names were long, or
if text boxes were set to have transparent backgrounds.
Thanks to kopias for reporting on IRC.
|
|
Made all action management operators use the AnimData-local flag instead of the scene
global one. Technically, this is more accurate and results in less blocking
situations (i.e. another object may be in tweakmode, but because of that, the active
object's action couldn't be stashed).
The main impetus for this though was that the Action Up/Down feature doesn't clear
the global flag, since it is not in a position to do so (since it can't load up
everything to clear it).
TODO:
I'll need to review how this global flag works and/or potentially ditch it (or
perhaps add some better ways to ensure that it stays valid), since while thinking
this over, I've noticed a few problems here. But, for the meantime, this commit
at least makes things more usable here in the short term.
|
|
Now marking NLA Tracks as Solo'd and muting the NLA stack are linked together
when using the Action Layer Up/Down tools. That is, when switching from a NLA strip
to the active action, if the track was solo'd, then the NLA stack will get muted;
and when switching from the active action to a NLA track, if the stack was muted,
the track will get solo'd. This linkage means that we ensure that when moving up
and down the stack, we can continue to check the actions in isolation without things
messing up when you switch to and from the active action.
Also fixed a bug where this wasn't getting applied when going in the other direction.
TODO:
- When we get the rest/reference track support, we're going to need to insert
some calls to flush the restpose values so that values from the previously
used action do not pollute the pose for the new action (if not all the
same controls get keyed across both). For now, it's best to only do this
switching from the first frame.
|
|
|
|
above/below
|
|
With this feature, it is now possible to quickly switch between different actions
stacked/stashed on top of each other in the NLA Stack without having to go to the
NLA Editor and doing a tab-select-tab dance, thus saving quite a few clicks. It
was specifically designed with Game Animation / Action Library workflows in mind,
but also helps layered animation workflows.
Usage:
Simply click on the up/down arrow buttons (between the action datablock selector
and the pushdown/stash buttons) to go to the action in the NLA Track above/below
the NLA Strip being whose action is being tweaked in the Action Editor.
Notes:
- These still work when you're not editing the action used by a NLA Strip.
If you're just animating a new action normally, it is possible to use the "down arrow"
to temporarily jump down to the previous action without losing the new action you're
working on, and then use the "up arrow" to get back to it once you're done checking
the other action(s).
- If there are multiple actions/strips on the same layer/track, then only the one
closest to the current frame will be used.
|
|
|
|
|
|
|
|
* Insert Keyframe tool for Dopesheet/Graph Editors needed to be modified to
not try to resolve the paths for NLA Control Curves
* For now, the poll callback to get the "Active FCurve" also works when given
a NLA control curve. They're really the same in most cases, and this should
be fine until one of the channels does something funky.
|
|
Using the standard "FCurve" animchannel type didn't work that well for
the control FCurves on NLA Strips, as the paths would not resolve correctly,
and the indentation was wrong. Also, there would likely be issues down the
track with applying NLA mapping. Hence, it's easier to just create a separate
type for this case, and adapt the rest of the code to also consider these (todo).
|
|
DopeSheet mode
When the active object had no shapekey data, trying to create a new action from the
Shape Keys mode of the DopeSheet would crash. The segfault here was a silly regression
caused by my earlier Action Stashing work.
However, the old (pre-Action Stashing) code here also wasn't that great either.
While it didn't crash, it would still silently create a new action, even if that
could not get assigned/used anywhere. To prevent both of these problems from
happening again, I've added additional null checks, as well as beefing up the poll
callback here to forbid keyframing
|
|
|
|
|
|
|
|
default again
This commit modifies the "New Action" operator to always stash the old action
before it creates a new one. As a result, the old active action will now have
a proper user of sorts after the new one is created, preventing previously
created actions from being lost.
Now that the New operator does this, it can be used for the Action Editor header AND
NLA Editor (Animation Data Panel -> Active Action) again. The "stash and create"
operator is somewhat redundant at this point as a result.
|
|
and create new" operator
In constrast to the old "new" operator, this operator will stash the existing action
in the stack to prevent it from being lost. This situation isn't totally ideal yet,
since the NLA Editor still calls the old method.
|
|
|
|
Action Editor modes
|
|
different functions
This is also just as prep for the next step
|
|
function
|
|
This operator (the snowflake icon, beside the pushdown button on the Action Editor
header) adds the currently active action to the NLA stack in a muted track, then
creates + loads a new action ready to be populated with new keyframes.
Since the NLA is being used to hang on to all the actions here, no actions are
getting lost.
Usage Notes (there will be some additional tweaks to make this nicer):
* To preview different actions that have been "stashed", simply click the "Solo"
toggle for the track containing the action in question. Playing back the NLA will
now show the stashed track
* To edit a previously stashed action - simply enter tweakmode on it in the NLA
while the "Solo" toggle is enabled.
Todo:
* Add some more operators here to polish up the Action <-> NLA bridge to make the
layered and stash workflows smoother. Examples include some tools to easily
switch between the different actions layers in the stack, as well as making it
easier to get out of tweakmode (and sync up the action lengths)
* Review and cleanup the behaviour of the "new" operator here to avoid the old
problems that users were running into
* After the next release - Implement the full Action Libraries functionality, with
ways to bridge the stashed strips over to a full-blown library.
|
|
refuse to do anything
|
|
the NLA Stack
This commit exposes the "Push Down" button/functionality found in the NLA Editor
to the Action Editor, so that actions can be added NLA Stack from here too. The
main point of this for now is to make the whole layered-animation workflow nicer
more efficient, but not requiring the second editor be visible in common cases.
It also conveniently sets things up for the next few changes (already hinted at
here)...
|
|
(Note for the uninitiated looking at the diffs: this is very much *not* what
you're probably thinking right now, if you're looking at the line in
act_new_exec())
|
|
and graph editor.
This was a tricky commit that was not so straightforward to make work.
The information for bones is not easy to come by in the animation curves,
however we do have some string manipulation tricks to make it happen.
Testing in gooseberry worked for the rigs there, commiting to master now
|
|
This merge-commit brings in a number of new features and workflow/UI improvements for
working with Grease Pencil. While these were originally targetted at improving
the workflow for creating 3D storyboards in Blender using the Grease Pencil,
many of these changes should also prove useful in other workflows too.
The main highlights here are:
1) It is now possible to edit Grease Pencil strokes
- Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions
to enter "Stroke Edit Mode". In this mode, many common editing tools will
operate on Grease Pencil stroke points instead.
- Tools implemented include Select, Select All/Border/Circle/Linked/More/Less,
Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete.
- Proportional Editing works when using the transform tools
2) Grease Pencil stroke settings can now be animated
NOTE: Currently drivers don't work, but if time allows, this may still be
added before the release.
3) Strokes can be drawn with "filled" interiors, using a separate set of
colour/opacity settings to the ones used for the lines themselves.
This makes use of OpenGL filled polys, which has the limitation of only
being able to fill convex shapes. Some artifacts may be visible on concave
shapes (e.g. pacman's mouth will be overdrawn)
4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing
has been added which draws strokes as a series of screen-aligned discs.
While this was originally a partial experimental technique at getting better
quality 3D lines, the effects possible using this technique were interesting
enough to warrant making this a dedicated feature. Best results when partial
opacity and large stroke widths are used.
5) Improved Onion Skinning Support
- Different colours can be selected for the before/after ghosts. To do so,
enable the "colour wheel" toggle beside the Onion Skinning toggle, and set
the colours accordingly.
- Different numbers of ghosts can be shown before/after the current frame
6) Grease Pencil datablocks are now attached to the scene by default instead of
the active object.
- For a long time, the object-attachment has proved to be quite problematic
for users to keep track of. Now that this is done at scene level, it is
easier for most users to use.
- An exception for old files (and for any addons which may benefit from object
attachment instead), is that if the active object has a Grease Pencil datablock,
that will be used instead.
- It is not currently possible to choose object-attachment from the UI, but
it is simple to do this from the console instead, by doing:
context.active_object.grease_pencil = bpy.data.grease_pencil["blah"]
7) Various UI Cleanups
- The layers UI has been cleaned up to use a list instead of the nested-panels
design. Apart from saving space, this is also much nicer to look at now.
- The UI code is now all defined in Python. To support this, it has been necessary
to add some new context properties to make it easier to access these settings.
e.g. "gpencil_data" for the datablock
"active_gpencil_layer" and "active_gpencil_frame" for active data,
"editable_gpencil_strokes" for the strokes that can be edited
- The "stroke placement/alignment" settings (previously "Drawing Settings" at the
bottom of the Grease Pencil panel in the Properties Region) is now located in
the toolbar. These were more toolsettings than properties for how GPencil got drawn.
- "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a
suggestion for an earlier discussion on developer.blender.org
- By default, the painting operator will wait for a mouse button to be pressed
before it starts creating the stroke. This is to make it easier to include
this operator in various toolbars/menus/etc. To get it immediately starting
(as when you hold down DKEy to draw), set "wait_for_input" to False.
- GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor
- Toolbar panels have been added to all the other editors which support these.
8) Pie menus for quick-access to tools
A set of experimental pie menus has been included for quick access to many
tools and settings. It is not necessary to use these to get things done,
but they have been designed to help make certain common tasks easier.
- Ctrl-D = The main pie menu. Reveals tools in a context sensitive and
spatially stable manner.
- D Q = "Quick Settings" pie. This allows quick access to the active
layer's settings. Notably, colours, thickness, and turning
onion skinning on/off.
|
|
|
|
Make the UI API more consistent and reduce confusion with some naming.
mainly:
- API function calls
- enum values
some internal static functions have been left for now
|
|
|
|
|
|
https://developer.blender.org/D643
Separates graphics context creation from window code in Ghost so that they can vary separately.
|
|
NLA Strips
NLA mapping corrections were being applied twice, causing column select to fail
|
|
|
|
vertex in a fcurve.
|
|
|
|
|