Age | Commit message (Collapse) | Author |
|
file`
Introduced by fc7beac8d6f4. During code review it wasn't clear why this
branch was needed, so we removed it. Now it is clear why it is needed
so we added it back and added a comment why the branch is needed.
Patch provided by @Severin.
|
|
With this it is possible to select any number of assets in the Asset
Browser and drag them into catalogs. The assets will be moved to that
catalog then. However, this will only work in the "Current File" asset
library, since that is the only library that allows changing assets,
which is what's done here.
While dragging assets over the tree row, a tooltip is shown explaining
what's going to happen.
In preparation to this, the new UI tree-view API was already extended
with custom drop support, see 4ee2d9df428d.
----
Changes here to the `wmDrag` code were needed to support dragging multiple
assets. Some of it is considered temporary because a) a proper #AssetHandle
design should replace some ugly parts of this patch and b) the multi-item
support in `wmDrag` isn't that great yet. The entire API will have to be
written anyway (see D4071).
Maniphest Tasks: T91573
Differential Revision: https://developer.blender.org/D12713
Reviewed by: Sybren Stüvel
|
|
|
|
If the "Current File" asset library is selected in the Asset Browser,
now asssets are filtered based on the active asset catalog. Previously
it would just show all assets. This was marked as a TODO in the code
already.
Maniphest Task: https://developer.blender.org/T91820
|
|
The Asset Browser now displays a tree with asset catalogs in the left
sidebar.
This replaces the asset categories. It uses the new UI tree-view API
(https://wiki.blender.org/wiki/Source/Interface/Views#Tree-View).
Buttons are displayed for adding and removing of catalogs. Parent items
can be collapsed, but the collapsed/uncollapsed state is not stored in
files yet.
Note that edits to catalogs (e.g. new or removed catalogs) are only
written to the asset library's catalog definition files when saving a
.blend.
In the "Current File" asset library, we try to show asset catalogs from
a parent asset library, or if that fails, from the directory the file is
stored in. See adaf4f56e1ed.
There are plenty of TODOs and smaller glitches to be fixed still. Plus a
UI polishing pass should be done.
Important missing UI features:
* Dragging assets into catalogs (WIP, close to being ready).
* Renaming catalogs
* Proper handling of catalogs in the "Current File" asset library
(currently not working well).
The "Current File" asset library is especially limited still. Since this
is the only place where you can assign assets to a catalog, this makes
the catalogs very cumbersome in general. To assign an asset to a
catalog, one has to manually copy the Catalog ID (a random hash like
number) to the asset metadata through a temporary UI in the Asset
Browser Sidebar. These limitations should be addressed over the next few
days, they are high priority.
Differential Revision: https://developer.blender.org/D12670
|
|
When the Asset Browser shows the "Current File" asset library, now it
also attempts to load an asset catalog definition file from location of
the current .blend file. This happens as follows:
* First, see if the file is inside of an asset library that is "mounted" in the
Preferences. Load the catalogs from there if so.
* Otherwise, if the file is saved, load the catalogs from the directory the
file is saved in.
* If the file is not saved, no catalogs will be loaded.
Unit tests are being worked on in D12689.
Creating catalogs from the "Current File" asset library still doesn't work, as
the asset catalog service doesn't construct an in-memory catalog definition
file in that case yet.
Differential Revision: https://developer.blender.org/D12675
|
|
Until now, the asset catalogs would only show up after all assets from
the library were loaded. Now the catalogs are read first, which makes
them appear pretty much immediately. This makes the UI more responsive
and feel less heavy.
I added a dedicated file-list type for asset libraries now. While not
necessarily needed, I prefer that so asset library specific stuff can be
handled in there.
|
|
When Browsing libraries the asset files were opened multiple times.
once to determine the needed groups to query and once for each
group to query the items in the group. For file browsing this makes sense
but for asset browsing this can be reduced.
This patch will load the asset files recursively and only opens them once.
Another change is that only the assets are requested and not filtered out
later in the process.
This patch is needed to simplify the library indexing. Where
we need access to the full library content.
## The numbers ##
Benchmarked by adding scenes of the spring open movie to the default
asset library. Refreshing the asset library would recursively load all the files
there.
| **8bc27c508a** | Processed 317 'directories/libraries' | 7.573986s |
| **Patch** | Processed 42 'directories/libraries' | 0.821013s |
{F10442811}
Reviewed By: mont29, Severin
Maniphest Tasks: T91406
Differential Revision: https://developer.blender.org/D12499
|
|
Catalogs work like directories on disk (without hard-/symlinks), in that
an asset is only contained in one catalog.
See T90066 for design considerations.
#### Known Limitations
Only a single catalog definition file (CDF), is supported, at
`${ASSET_LIBRARY_ROOT}/blender_assets.cats.txt`. In the future this is
to be expanded to support arbitrary CDFs (like one per blend file, one
per subdirectory, etc.).
The current implementation is based on the asset browser, which in
practice means that the asset browser owns the `AssetCatalogService`
instance for the selected asset library. In the future these instances
will be accessible via a less UI-bound asset system.
The UI is still very rudimentary, only showing the catalog ID for the
currently selected asset. Most notably, the loaded catalogs are not
shown yet. The UI is being implemented and will be merged soon.
#### Catalog Identifiers
Catalogs are internally identified by UUID. In older designs this was a
human-readable name, which has the problem that it has to be kept in
sync with its semantics (so when renaming a catalog from X to Y, the
UUID can be kept the same).
Since UUIDs don't communicate any human-readable information, the
mapping from catalog UUID to its path (stored in the Catalog Definition
File, CDF) is critical for understanding which asset is stored in which
human-readable catalog. To make this less critical, and to allow manual
data reconstruction after a CDF is lost/corrupted, each catalog also has
a "simple name" that's stored along with the UUID. This is also stored
on each asset, next to the catalog UUID.
#### Writing to Disk
Before saving asset catalogs to disk, the to-be-overwritten file gets
inspected. Any new catalogs that are found thre are loaded to memory
before writing the catalogs back to disk:
- Changed catalog path: in-memory data wins
- Catalogs deleted on disk: they are recreated based on in-memory data
- Catalogs deleted in memory: deleted on disk as well
- New catalogs on disk: are loaded and thus survive the overwriting
#### Tree Design
This implements the initial tree structure to load catalogs into. See
T90608, and the basic design in T90066.
Reviewed By: Severin
Maniphest Tasks: T91552
Differential Revision: https://developer.blender.org/D12589
|
|
Amendment to 7a5216497cc3.
Removed this before committing, because I thought it wasn't needed. Of
course it was...
|
|
For some reason the asset preview isn't created or loaded correctly in
some instances. This could be addressed with D9974, but hard to tell
since I only have a failing .blend file, no steps to recreate it from
scratch.
Would crash when opening an Asset Browser, selecting an object asset
(that has an invalid preview stored) and opening the Asset Browser
sidebar, so that the preview is visible there.
|
|
|
|
|
|
Pass `FileListReadJob` to the `read_job_fn` callback, instead of exploding
the struct into its individual fields, passing those as parameters, and
marking a bunch of those as unused again.
No functional changes.
|
|
Add a comment to document what `FileListReadJob::tmp_filelist` is for,
and how it's freed.
No functional changes.
|
|
In the `FileList` struct, rename the `AssetLibraryReference
*asset_library` field to `asset_library_ref` -- it's a description of
which asset library is used, and not the asset library itself.
This is to make space for a future `AssetLibrary *asset_library` field,
which will point to an actual asset library struct/class.
No functional changes.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D12151
|
|
This isn't used at all in the current File and Asset Browser design.
|
|
When viewing font files in the File Manager, this patch uses the font's
family and style names to show the same type of string shown to users
in operating system lists. For example "Book Antiqua Regular" instead
of "BKANT.ttf"
see D12020 for details and examples.
Differential Revision: https://developer.blender.org/D12020
Reviewed by Campbell Barton and Julian Eisel
|
|
Since recently it's possible to access assets from outside the
File/Asset Browser, via the asset view template. So we are slowly
moving away from file space specific code to dedicated asset system
code. I introduced `AssetLibraryReference` as a duplicate of
`FileSelectAssetLibraryUID`, with a plan to delete the latter in a
separate cleanup commit. That's exactly what this commit is.
This will cause Asset Browsers to open with the default "Current File"
Asset Library. We could avoid that, but it's a minor issue really.
|
|
Implements a basic, WIP version of the asset list. This is needed to
give the asset view UI template asset reading and displaying
functionality.
See:
* Asset System: Data Storage, Reading & UI Access - https://developer.blender.org/T88184
Especially the asset list internals should change. It uses the
File/Asset Browser's `FileList` API, which isn't really meant for access
from outside the File Browser. But as explained in T88184, it does a lot
of the stuff we currently need, so we (Sybren Stüvel and I) decided to
go this route for now. Work on a file-list rewrite which integrates well
with the asset system started in the `asset-system-filelist` branch.
Further includes:
* Operator to reload the asset list.
* New `bpy.types.AssetHandle.get_full_library_path()` function, which
gets the full path of the asset via the asset-list.
* Changes to preview loading to prevent the preview loading job to run
eternally for asset views. File Browsers have this issue too, but
should be fixed separately.
|
|
This per-workspace active asset library will be used by the asset views
later. Note that Asset Browsers have their own active asset library,
overriding the one from the workspace.
As part of this the `FileSelectAssetLibraryUID` type gets replaced by
`AssetLibraryReference` which is on the asset level now, not the
File/Asset Browser level. But some more work is needed to complete that,
which is better done in a separate commit.
This also moves the asset library from/to enum-value logic from RNA to
the editor asset level, which will later be used by the asset view.
|
|
Accidentally included this in rB01e1944cd455, it came from a merge
conflict.
|
|
When renaming an ID somewhere in the UI after marking it as asset, it would
often get lost in the Asset Browser (scrolled out of view). It would also get
deactivated.
This patch makes sure that if an asset is active whose ID gets renamed, it is
kept active and visible. That is important for a fast, uninterrupted asset
creation workflow, where users often rename assets while working in the asset
browser.
Old code stored the new file-name to identify a file after re-reading the
file-list after the rename. For assets that doesn't work because there may be
multiple assets with the same name. Here the simple solution of just storing
the pointer to the renamed ID is chosen, rather than relying on the file-name
in this case. (Should be fine with undo, since the ID * reference is short
lived, it's not stored over possible undo steps. If it turns out to have
issues, I rather switch to a rename_id_uuid, but keep that separate from the
file->uid).
Reviewed by: Sybren Stüvel
Differential Revision: https://developer.blender.org/D11119
|
|
|
|
|
|
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
This code was written for the File Browser together with the Asset Engine
design, that is not part of the Asset Browser/System design anymore. Updated
comments accordingly.
`FileDirEntryRevision` was actually used, but I removed it and moved the used
members to the parent `FileDirEntry`, since there is no concept of revisions
currently.
There should be no functional changes.
|
|
To some degree these are changes in preparation of further Asset Browser
related changes, see D11119. But also, the current UUID design was written for
the old Asset Engine design, which isn't part of the current Asset
Browser/System design anymore.
And lastly, "UUID" are a well established standard
(https://en.wikipedia.org/wiki/Universally_unique_identifier) which this
implementation didn't follow. What we have here is more of an index, or a
unique identifier (https://en.wikipedia.org/wiki/Unique_identifier).
So this does the following changes:
* Renames "UUID" to "UID"
* Changes the type of the UID to (a typedef'ed) `uint32_t`, which is more than
enough for our current asset system design and simplifies things.
* Due to the new type, we can avoid allocations for hash-table storage.
* Add/use functions for UID handling
Note that I am working on a major rewrite of the file-list code. Meanwhile we
want to keep things sensible.
|
|
When multiple File or Asset Browsers would load at once (e.g. when loading a
file with two File Browsers open) and they would load multiple directories or
.blend files (using the Recursions option in the File Browser or loading an
asset library with multiple .blends), often only one File/Asset Browser would
correctly load all files. Others would be incomplete or entirely empty. That
was because of a race condition, where the directories or .blend files would be
loaded concurrently and the first one that finished would cancel the other
ones. This again happened because they used the job system with the same
"owner", which by design makes all jobs with the same owner cancel as soon as
the first is finished.
Address this by making sure they have different owners. That is, not the scene
anymore, but the filelist the job belongs to. Doesn't make much sense to use
the scene as owner for scene-unrelated file loading anyway.
Steps to reproduce were:
* Open two File Browsers as regular editors.
* In the Display Settings popover, set "Recursions" to 2 or 3 levels.
* Navigate to a directory with plenty of subdirectories in both File Browsers.
* Save the file.
* Reload the file, one of the File Browsers likely has an incomplete file list.
Alternatively, use Asset Browsers and open an asset library containing multiple
.blends.
|
|
In-progress Safari download files/packages are now recognized as bundles
and therefore not treated as directories.
Differential Revision: https://developer.blender.org/D11613
|
|
More stupid mistake in recent enhanced reports for file load code,
rB82c17082ba0e left some read-after-free situations.
|
|
|
|
This reverts commit rB3a48147b8ab92, and fixes the issues with linking
etc.
Change compared to previous buggy commit (rBf8d219dfd4c31) is that
new `BlendFileReadReports` reports are now passed to the lowest level
function generating the `FileData` (`filedata_new()`), which ensures
(and asserts) that all code using it does have a valid non-NULL pointer
to a `BlendFileReadReport` data.
Sorry for the noise, it's always when you think a change is trivial and
do not test it well enough that you end up doing those kind of
mistakes...
|
|
After looking into task isolation issues with Sergey, we couldn't find the
reason behind the deadlocks that we are getting in T87938 and a Sprite Fright
file involving motion blur renders.
There is no apparent place where we adding or waiting on tasks in a task group
from different isolation regions, which is what is known to cause problems. Yet
it still hangs. Either we do not understand some limitation of TBB isolation,
or there is a bug in TBB, but we could not figure it out.
Instead the idea is to use isolation only where we know we need it: when
holding a mutex lock and then doing some multithreaded operation within that
locked region. Three places where we do this now:
* Generated images
* Cached BVH tree building
* OpenVDB lazy grid loading
Compared to the more automatic approach previously used, there is the downside
that it is easy to miss places where we need isolation. Yet doing it more
automatically is also causing unexpected issue and bugs that we found no
solution for, so this seems better.
Patch implemented by Sergey and me.
Differential Revision: https://developer.blender.org/D11603
|
|
Under some circumstances using task isolation can cause deadlocks.
Previously, our task pool implementation would run all tasks in an
isolated region. Now using task isolation is optional and can be
turned on/off for individual task pools.
Task pools that spawn new tasks recursively should never enable
task isolation. There is a new check that finds these cases at runtime.
Right now this check is disabled, so that this commit is a pure refactor.
It will be enabled in an upcoming commit.
This fixes T88598.
Differential Revision: https://developer.blender.org/D11415
|
|
This patch turns off the creation of file thumbnails for files that are
offline and therefore not fully-present on the file system. These types
of files - typically cloud-based or stored on slower backup media -
only have their contents available when actually accessed, at which
point there will be a short delay. If we allow thumbnail creation in
this state then all offline files in a folder will be downloaded just
to view a listing, which can take a long time.
Files in this state will instead get a more generic thumbnail that
still indicates file type (icon in center) and that shows offline state
will a special icon at the bottom-left.
Although this currently only affects Windows users, most of this patch
is platform-agnostic. So other platforms inherit this behavior if they
only add FILE_ATTR_OFFLINE attribute to files in this state.
See D11101 for more information.
Differential Revision: https://developer.blender.org/D11101
Reviewed by Julian Eisel
|
|
No real functional changes.
When `i` is zero, `filelist_cache_previews_push` was called twice with
the same icon.
This caused the preview to be computed twice when only once is needed.
|
|
|
|
|
|
This patch adds support to export and import grease pencil in several formats.
Inlude:
* Export SVG
* Export PDF (always from camera view)
* Import SVG
The import and export only support solid colors and not gradients or textures.
Requires libharu and pugixml.
For importing SVG, the NanoSVG lib is used, but this does not require installation (just a .h file embedded in the project folder)
Example of PDF export: https://youtu.be/BMm0KeMJsI4
Reviewed By: #grease_pencil, HooglyBoogly
Maniphest Tasks: T83190, T79875, T83191, T83192
Differential Revision: https://developer.blender.org/D10482
|
|
Add operator `FILE_OT_view_selected` to the file browser (and thus also
to the asset browser) that scrolls selected files into view.
This includes the active file, even though it is not selected. In
certain cases the active file can loose its selected state (clicking
next to it, or refreshing the asset browser), but then it's still shown
in the right-hand sidebar. Because of this, I found it important to take
it into account when scrolling.
This also includes a change to the keymaps:
- Blender default: {key NUMPAD_PERIOD} is removed from the "reload"
operator, and assigned to the new "view selected files" operator. The
reload operator was already doubly bound, and now {key R} is the only
remaining hotkey for it.
- Industry compatible: {key F} is assigned to the new "view selected
files" operator. This is consistent with the other "view selected"
operators in other editors.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10583
|
|
Use _fn as a suffix for callbacks.
|
|
Add an RNA function `activate_asset_by_id(asset_id: ID, deferred: bool)`
to the File Browser space type, which intended to be used to activate an
asset's entry as identified by its `ID *`. Calling it changes the active
asset, but only if the given ID can actually be found.
The activation can be deferred (by passing `deferred=True`) until the
next refresh operation has finished. This is necessary when an asset has
just been added, as it will be loaded by the filebrowser in a background
job.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10549
|
|
The name string of each file was duplicated but not freed. The new flag to
ensure the file-list frees the name wasn't set. Mistake in ca475479eb26.
|
|
The "Current File" asset library didn't get refreshed after the data-block name
changed. But rather than entirely refreshing the file list, or doing possibly
problematic partial refreshes, reference the data-block name directly, so a
simple redraw gets the new name displayed.
Addresses T83751
|
|
Otherwise it would just show empty space where the icon is supposed to
be.
Unfortunately this icon is upscaled quite a bit and doesn't look too
great. Would be good to improve but not a high priority.
|
|
No icon should be created if the preview doesn't exist.
|
|
|
|
Storing the asset library reference by name wasn't a good idea, I thought it
would work with a careful fallback, but it's easier to just use the index
instead. So change to using indices, make sure fallback methods work reliable
and make sure the file list is updated when asset libraries are removed.
I added a new notifier type for the latter, I prefer not using file notifiers
in asset-library/preferences code. We have more than enough values for
notifiers left.
|