Age | Commit message (Collapse) | Author |
|
This patch adds the breakdown (or tween) functionality to the graph editor.
The factor defines the linear interpolation from left key to right key.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9375
Ref: D9375
|
|
This patch adds the blend to neighbor operator to the Graph editor.
The operator acts like the blend to neighbor operator for a pose context, just working on keyframes.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9374
Ref: D9374
|
|
When using graph slider operators like D9374
it showed a warning when no keys were selected.
However since that stops the modal operation it should be an Error.
Also the message was misleading
since it could error for different reasons than stated.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D13655
Ref: D13655
|
|
|
|
Ref T92709
|
|
The line that sets the factor_prop in graph_slider_ops.c
has been left in the common invoke function by accident.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D13477
Ref: D13477
|
|
rename percentage_prop to factor_prop
rename remove_ratio to factor
remove "graphkeys" prefix from functions
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D13476
Ref: D13476
|
|
This patch extracts the modal functions from GRAPH_OT_decimate
and makes them generic so they can be reused by future operators
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9326
Ref: D9326
|
|
|
|
There is no need to multiply the "dash_width" by `UM.pixel size` since the "viewport_size" is already being divided by the DPI.
Ref {rBfb0ea9}
|
|
|
|
Use the `GPU_SHADER_3D_POLYLINE_UNIFORM_COLOR` shader instead of `GPU_SHADER_2D_LINE_DASHED_UNIFORM_COLOR`.
This is just a partial solution as "protected" fcurves still use the dashed shader.
Differential Revision: https://developer.blender.org/D13290
|
|
|
|
The current `ICON_SMALL_TRI_RIGHT_VEC` uses dark hard-coded colors ([`0.2`, `0.2`, `0.2`])
which makes it impossible to theme and hard to see in dark contexts.
Use `ICON_RIGHTARROW` to match the Outliner's breadcrumbs. This icon uses `TH_TEXT` so it's visible as long as the rest of the text is.
##### Master
(Properties editor background made red on purpose to be able to see the triangle icon)
{F11713038, size=full}
#### This patch
{F11713039, size=full}
Reviewed By: #user_interface, Severin, HooglyBoogly
Maniphest Tasks: T92771
Differential Revision: https://developer.blender.org/D13106
|
|
|
|
Future operators can use the same code,
so it is moved up to disassociate it from decimate
No functional changes
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12489
Ref: D12489
|
|
This patch renames:
* tDecimateGraphOp to tGraphSliderOp
* dgo to gso (to match with the struct rename)
* decimate_reset_bezts to reset_bezts to indicate it can be used by other functions
No functional changes
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12490
Ref: D12490
|
|
|
|
Also fix several wrong usages of `IFACE_` (as a reminder, error/info
messages should use `TIP_`, not `IFACE_`).
|
|
Types were used before being declared.
|
|
The code to store an original bezt array previously lived in
`graphkeys_decimate_invoke`.
Since future graph slider operators will need this function as well,
it has been extracted.
No functional changes.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12487
Ref: D12487
|
|
An int flag is used to filter animation channels for
operators to work on. The flag was duplicated multiple times.
This patch removes the duplication by creating a constant
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12486
Ref: D12486
|
|
Use arrays for wmEvent coordinates, this quiets warnings with GCC11.
- `x, y` -> `xy`.
- `prevx, prevy` -> `prev_xy`.
- `prevclickx, prevclicky` -> `prev_click_xy`.
There is still some cleanup such as using `copy_v2_v2_int()`,
this can be done separately.
Reviewed By: campbellbarton, Severin
Ref D12901
|
|
This is available in the DopeSheet, GraphEditor, and NLA Editor.
Currently:
- Dopesheet advertises to take selection into account...
-- ...but doesnt - which might be a mistake in rBe3842d1ca4dd
- Graph Editor does not mention selection...
-- ...and also does not take it into account
- NLA does not mention selection...
-- ...but takes it into account
Now:
- make them **all** take selection into account (you can still do a
quick 'Select All' prior to get the full range -- better than not being
able to set this based on selection)
- mention this for all in the tooltip
- also reword to 'Set Preview Range to Selected' since using the term
'Auto' impilies this would change on selection change.
Maniphest Tasks: T91743
Differential Revision: https://developer.blender.org/D12651
|
|
|
|
As the title says
Reviewed By: lichtwerk, campbellbarton
Differential Revision: https://developer.blender.org/D12665
|
|
Currently the Drivers Editor shows this (the blue thing can be dragged
to change frame):
{F10647661}
But the Drivers Editors X axis is the output of the driver [which can be
further tweaked by the curve] not time(frame).
So it seems better to not mix them here, it is just confusing to have
two different units on one axis.
Especially since what we really want to look at in X (the drivers output
value) can be in a totally unrelated range compared to frames, so e.g.
we might be interested in a drivers range from 0.0 to 1.0 and a
framerange of 100 to 200, so putting this on one axis just does not make
sense. Better to use a separate timeline for this.
Note 2.79 also did not do this.
Maniphest Tasks: T91157
Differential Revision: https://developer.blender.org/D12392
|
|
When "Show Cursor" is unchecked, the Drivers Editor would still display
the vertical line representing the cursor x.
Probably overseen in {rB65072499c65a} (historically the vertical line
could represent either the current frame of the cursor X in drawing, but
this is now much more separate).
There is no point in seeing part of the cursor in the Drivers Editor if
this is disabled.
Also correct outdated comments.
ref. T91157
Maniphest Tasks: T91157
Differential Revision: https://developer.blender.org/D12391
|
|
On the blender side this commit fixes importing video files with audio
and video streams that do not share the same start time and duration.
Differential Revision: https://developer.blender.org/D12353
|
|
- Bend (Transform).
- Extrude to Cursor.
- Lasso Select (related operators such as node-cut links, mask.. etc).
- Rip Mesh / UV's.
- Vertex/Edge Slide.
|
|
This patch implements the generic slider from
`ed_draw.c` to the `GRAPH_OT_decimate` operator
This draws a useful UI and enables precision mode and stepping
Overshoot is disabled
The status message is moved to the workspace footer
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9361
Ref: D9361
|
|
|
|
|
|
Having settings such as "extend" saved between executions causes
keymaps that don't include this setting to remember the value
between execution.
No longer store this setting for selection operations & remove
redundant values from the key-maps, see: T90275.
|
|
|
|
In the graph editor, Mirror Keys by Value would convert the value to mirror
over, to account for different units for linear & rotational properties.
The conversion was done in the different direction, though, resulting in
values that were too large by a factor of (180/pi)^2.
|
|
|
|
|
|
In driver editor, vertically flip the value debug lines to align
them with the timeline header values. This makes it easier to read
the values. Also set the line width explicitly, which was incorrect
in some cases.
Differential Revision: https://developer.blender.org/D8877
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
|
|
|
|
|
|
|
|
|
|
Test the intersection of segment instead of point.
|
|
Clear the runtime data structs instead of individual members,
this simplifies adding new runtime members as there are at least
two places they would need to be cleared.
Resolves error in D8883.
|
|
These were limited to obvious cases. Some less obvious cases
were kept as refactoring might make them necessary in future.
|
|
|
|
Selection of an FCurve with box/circle select now selects the entire
curve and all its keys:
- Box selecting a curve selects all the keyframes of the curve.
- Ctrl + box selecting of the curve deselects all the keyframes of the
curve.
- Shift + box selecting of the curve extends the keyframe selection,
adding all the keyframes of the curves that were just selected to the
selection.
- In all cases, if the selection area contains a key, nothing is
performed on the curves themselves (the action only impacts the
selected keys).
Reviewed By: sybren, #animation_rigging
Differential Revision: https://developer.blender.org/D11181
|