Age | Commit message (Collapse) | Author |
|
This commit renames enums related the "Curve" object type and ID type
to add `_LEGACY` to the end. The idea is to make our aspirations clearer
in the code and to avoid ambiguities between `CURVE` and `CURVES`.
Ref T95355
To summarize for the record, the plans are:
- In the short/medium term, replace the `Curve` object data type with
`Curves`
- In the longer term (no immediate plans), use a proper data block for
3D text and surfaces.
Differential Revision: https://developer.blender.org/D14114
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
|
|
Previously, macros were ifdefed using the cmake option `WITH_INTERNATIONAL`
However, the is unnecessary as withen the functions themselves have checks for building without internationalization.
This also means that many `add_definitions(-DWITH_INTERNATIONAL)` are also unnecessary.
Reviewed By: mont29, LazyDodo
Differential Revision: https://developer.blender.org/D13929
|
|
MSVC used to warn about const mismatch for arguments passed by value.
Remove these as newer versions of MSVC no longer show this warning.
|
|
This was added in rBd13970de8627, now use in more places.
|
|
In almost all cases there is no difference between `G.relbase_valid`
and checking `G.main->filepath` isn't an empty string.
In many places a non-empty string is already being used instead of
`G.relbase_valid`.
The only situation where this was needed was when saving from
`wm_file_write` where they temporarily became out of sync.
This has been replaced by adding a new member to `BlendFileWriteParams`
to account for saving an unsaved file for the first time.
Reviewed By: brecht
Ref D13564
|
|
Ref T92709
|
|
|
|
|
|
It seems possible to switch object selection (if `Lock Object Modes` is
turned off) and end up with an object that has a SculptSession but a
NULL PBVH.
(I was not able to repro from scratch, but file from the report was
clearly in that state).
This would crash in displaying scene statistics.
While there might be a deeper fix (making sure PBVH is available early
enough -- possibly using `BKE_sculpt_object_pbvh_ensure`,
`sculpt_update_object` or friends), there are also many checks in tools
for PBVH, so the situation seems to be somewhat vaild/expected also in
other places.
So to fix this, just check for a non-NULL PBVH, returning early
otherwise.
Note: this leaves us with displaying 0/0 Faces & Vertices in the borked
case until an operation takes place that updates the PBVH.
Maniphest Tasks: T92246
Differential Revision: https://developer.blender.org/D12904
|
|
|
|
This was noted as a TODO as it wraps RNA_property_string_get_alloc
which takes a length return argument.
|
|
|
|
Even though lights were part of `SceneStats`, they were not used when
rBfd10ac9acaa0 was committed.
This patch adds the light count back into the statistics. When a light is
the active object, it will display the total number of lights in the
scene, as well as how many lights are currently selected.
{F10141354}
Reviewed By: #user_interface, Severin, Blendify, harley
Maniphest Tasks: T88512
Differential Revision: https://developer.blender.org/D11387
|
|
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
Generally the evaluated mesh should not be changed, since that is the
job of the modifier stack. Current code is far from const correct in
that regard. This commit uses a const variable for the reult of
`BKE_object_get_evaluated_mesh` in some cases. The most common
remaining case is retrieving a BVH tree from the mesh.
|
|
|
|
|
|
|
|
- Include all objects in pose mode.
- Show the number of objects in pose mode.
- Show the number of objects in edit mode for all types of objects
(not just meshes).
|
|
Sculpting dynamic topology used to code-path for counting object
then never used the result.
Match object mode checks in string access & drawing.
|
|
This patch improves the 3DView statistics overlay to show LOCAL stats
while in local view. This means the stats can vary between 3DViews and
the statusbar when views are in local view, but this gives a much more
accurate count of the objects, and their components, that you are
directly working with rather than just scene values.
Differential Revision: https://developer.blender.org/D8883
Reviewed by Campbell Barton
|
|
These were limited to obvious cases. Some less obvious cases
were kept as refactoring might make them necessary in future.
|
|
To draw the overlay stats in columns the strings must be measured to
find the longest one. In some circumstances this measurement can be
incorrect. We draw the text with a specific size yet do not explicitly
set the size before calling BLF_size. This patch properly sets the size
so that the measurement will match what will be used for output.
See T88799 for examples of measurement failure.
Differential Revision: https://developer.blender.org/D11504
Reviewed by Hans Goudey
|
|
Event though in practice this wasn't causing problems as the fixed size
buffers are generally large enough not to truncate text.
Using the result from `snprint` or `BLI_snprintf` to step over a fixed
size buffer allows for buffer overruns as the returned value is the size
needed to copy the entire string, not the number of bytes copied.
Building strings using this convention with multiple calls:
ofs += BLI_snprintf(str + ofs, str_len_max - ofs);
.. caused the size argument to become negative,
wrapping it to a large value when cast to the unsigned argument.
|
|
|
|
|
|
All changes:
* Include `file.pack_libraries` and `file.unpack_libraries` to the menu
[1].
* Rename "Pack Blender Libraries" → "Pack Linked Libraries" [2].
* Rename "Unpack Blender Libraries" → "Unpack Linked Libraries" [2].
* Rename "Pack All Into .blend" → "Pack Resources" [3]
* Rename "Unpack All Into Files" → "Unpack Resources" [3]
* Rename "☑ Automatically Pack Into .blend" → "☑ Automatically Pack
Resources" [3]
* Rename "Make All Paths Relative" → "Make Paths Relative" [4]
* Rename "Make All Paths Absolute" → "Make Paths Absolute" [4]
* Add separators accordingly
---
[1] - This was never exposed since its original commit rB16411da41e40.
Now that operator not listed in menus don't
show up in the search, this became even more hidden.
[2] - The original name (Pack Blender Library) was not clear enough.
Pose Libraries and Asset Libraries are also technically Blender
libraries.
[3] - The term All was misleading since it didn't include the Linked
Libraries.
[4] - No need to use "All". It is not used in the Report/Find Missing
Files either.
This commit put this in the File > External Data menu.
Differential Revision: https://developer.blender.org/D11109
|
|
Use of uninitialized variable.
Problem introduced in 87a70801c6a9fe5077ca882dec820a8f24deb07e.
|
|
Revert in rB05dddb71b098 did a poor job and left some
rubbish.
|
|
This reverts commit 9cce18a5858cb93da626f5f0fd7e09cd66637e05.
rB9cce18a5858c broke the build in unforeseen ways, not easily fixable.
revert for now, so master will at least build again.
|
|
Removes a cast in an argument followed by an initializer list, and
designated initializers, which are only part of the C++20 standard.
|
|
I'm currently doing some experiments in the info editor and
for that it is easier if the info editor is in c++ already.
|
|
Remove redundant headers using
`./source/tools/utils_maintenance/code_clean.py`
Reviewed By: jmonteath
Ref D10364
|
|
|
|
Improved contrast for Status Bar report warning messages.
Differential Revision: https://developer.blender.org/D10242
Reviewed by Hans Goudey
|
|
|
|
Passing 4x arguments for the rectangle,
mixed in with round-box radius & color wasn't very readable.
Instead, pass a `rctf` as the first argument to UI box drawing functions.
|
|
|
|
These functions with many arguments can be unwieldy. Aside from the obvious issues
with rewriting the list of arguments and the opportunities for error and frustration
that presents, the long list of arguments make these systems hard to change. So when
an argument should be added, someone might skip that and add some hack instead.
So, as proposed in T73586#1037210, this patch instead uses a "params" struct for
each of these callbacks.
- Use param argument for `ARegionType.listener`
- Remove unused window field in region listener
- Use param argument for `SpaceType.listener`
- Use params struct for `ARegionType.message_subscribe`
Differential Revision: https://developer.blender.org/D9750
|
|
Approximately 195 changes of capitalization to conform to MLA title style.
UI labels and property names should use MLA title case, while descriptions
should be capitalized like regular prose, generally with only the start of
a sentence capitalized.
Differential Revision: https://developer.blender.org/D9922
|
|
Approximately 33 changes of capitalization to conform to MLA title style.
Differential Revision: https://developer.blender.org/D9796
Reviewed by Julian Eisel
|
|
This was missing from D9623. Now the same sculpt scene stats are also
displayed in the status bar.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9700
|
|
Makes it more clear whether object is allowed or not allowed to be NULL.
Also, avoids possible access to the different object mode enumerator.
Should be no functional changes.
|
|
ob can be NULL, so it needs to be checked before accessing ob->mode
Differential Revision: https://developer.blender.org/D9680
|
|
This adds the vertex and face count info to the scene stats in sculpt
mode. These stats count the active vertices and faces in the
sculptsession for the active object. This has the following advantages:
- It is possible to know how many vertices the sculptsession has active
comparted to the vertex count of the entire scene from sculpt mode
- When sculpting with constructive modifiers, these stats will report the
number of vertices that you can actually sculpt with, instead of the
vertex count of the modified mesh and the entire scene.
Reviewed By: sergey, dbystedt
Differential Revision: https://developer.blender.org/D9623
|
|
`WM_operator_properties_filesel()` allows C operators to set a display or sort
type for the File Browser to use. But the File Browser would always override
that because of an invalid `_is_set()` check. (The operators don't actually set
the value, they only set the property's default value.)
The only operator affected by this is "Recover Auto Save". It is supposed to
show a vertical list ordered chronologically. It used settings from the
previous File Browser usage before this patch.
Operators using the File Browser should generally use
`FILE_DEFAULTDISPLAY`/`FILE_SORT_DEFAULT` now, except if they have a reason not
to. See comments at their definition.
----
This makes it so operators that set a different display or sort type
don't change the sort or display type for the next File Browser operation.
So using "Recover Auto Save" entirely isolates display and sort type from other
operations.
Differential Revision: https://developer.blender.org/D8598
Reviewed by: Bastien Montagne
|
|
Various changes to some labels and descriptions to be more accurate, clear, or less confusing.
Differential Revision: https://developer.blender.org/D8394
Reviewed by Hans Goudey
|