| Age | Commit message (Collapse) | Author |
|---|
|
Split up `ANIM_deselect_anim_channels()` into
`ANIM_anim_channels_select_set()` and
`ANIM_anim_channels_select_toggle()`.
`ANIM_anim_channels_select_set()` is equivalent to the old
`ANIM_deselect_anim_channels(..., false, ACHANNEL_SETFLAG_xxx)`.
`ANIM_anim_channels_select_toggle()` is equivalent to the old
`ANIM_deselect_anim_channels(..., true, ACHANNEL_SETFLAG_ADD)`.
`ANIM_deselect_anim_channels(..., true, ACHANNEL_SETFLAG_CLEAR)` was
also called once. The `true` parameter suggested the "toggle" behaviour
was intended, but the `ACHANNEL_SETFLAG_CLEAR` argument prevented any
toggling. This is now replaced with `ANIM_anim_channels_select_set(ac,
ACHANNEL_SETFLAG_CLEAR)` to make this explicit.
No functional changes, just a cleanup in order to better understand how
the selection works.
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
Tag an Action for recalculating animation when it's pushed down onto the
NLA stack, as its effective boundaries change. Normally an Action spans
all of the timeline, and the effects of Cycle modifiers are visible
everywhere. When the Action is converted to an NLA clip, the modifier's
effect should only be visible for the duration of the NLA clip.
|
|
Remove `ID_RECALC_COPY_ON_WRITE` when tagging `ID_RECALC_ANIMATION`; the
former is unnecessary when using the latter.
No functional changes.
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors` module.
No functional changes.
|
|
This data block will be the container for simulation node trees.
It will be used for the new particle node system (T73324).
The new data block has the type `ID_SIM`.
It is not visible to users and other developers by default yet.
To enable it, activate the cmake option `WITH_NEW_SIMULATION_TYPE`.
New simulation data blocks can be created by running `bpy.data.simulations.new("name")`.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D7225
|
|
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
|
|
The `BKE_animsys.h` and `anim_sys.c` files already had a an "AnimData
API" section. The code in that section has now been split off, and
placed into `BKE_anim_data.h` and `anim_data.c`.
All files that used to include `BKE_animsys.h` have been adjusted to
only include the animation headers they need (sometimes none).
No functional changes.
|
|
|
|
Only the volume object is exposed in the user interface. It is based on OpenVDB
internally. Drawing and rendering code will follow in another commit.
https://wiki.blender.org/wiki/Source/Objects/Volume
https://wiki.blender.org/wiki/Reference/Release_Notes/2.83/Volumes
Hair and PointCloud object types are hidden behind a WITH_NEW_OBJECT_TYPES
build option. These are unfinished, and included only to make it easier to
cooperate on development in the future and avoid tricky merges.
https://wiki.blender.org/wiki/Source/Objects/New_Object_Types
Ref T73201, T68981
Differential Revision: https://developer.blender.org/D6945
|
|
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
|
|
The old layout of `PointerRNA` was confusing for historic reasons:
```
typedef struct PointerRNA {
struct {
void *data;
} id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
This patch updates it to:
```
typedef struct PointerRNA {
struct ID *owner_id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
Throughout the code base `id.data` was replaced with `owner_id`.
Furthermore, many explicit pointer type casts were added which
were implicit before. Some type casts to `ID *` were removed.
Reviewers: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D5558
|
|
The main reason for this change is to allow setting the
active frame with the left mouse button, while still being
able to select e.g. keyframes with the same mouse button.
The solution is to introduce a new scrubbing region with
a specialized keymap. There are a couple of related todos,
that will be handled in separate commits.
Those are listed in D4654.
This solves T63193.
Differential Revision: https://developer.blender.org/D4654
Reviewers: brecht, billreynish
|
|
At first you could think that this refactor would not be
necessary, because `ACHANNEL_FIRST` exists already.
It contained the small y offset that all channels had.
Unfortunately, a lot of code assumed that
`ACHANNEL_FIRST = -ACHANNEL_HEIGHT`, making the
define pretty much useless. This refactor fixes that
for the action and nla editor.
As a nice side effect, this patch fixes channel box select.
Before there was always have a half-channel offset.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D4783
|
|
No functional change.
|
|
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Prevents clang-format wrapping text before comments.
|
|
Also (mostly in comments): behaviour -> behavior (we use American English).
|
|
There were at least three copies of those:
- OB_RECALC* family of flags, which are rudiment of an old
dependency graph system.
- PSYS_RECALC* which were used by old dependency graph system
as a separate set since the graph itself did not handle
particle systems.
- DEG_TAG_* which was used to tag IDs.
Now there is a single set, which defines what can be tagged
and queried for an update. It also has some aggregate flags
to make queries simpler.
Lets once and for all solve the madness of those flags, stick
to a single set, which will not overlap with anything or require
any extra conversion.
Technically, shouldn't be measurable user difference, but some
of the agregate flags for few dependency graph components did
change.
Fixes T58632: Particle don't update rotation settings
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This commit merge the full development done in greasepencil-object branch and include mainly the following features.
- New grease pencil object.
- New drawing engine.
- New grease pencil modes Draw/Sculpt/Edit and Weight Paint.
- New brushes for grease pencil.
- New modifiers for grease pencil.
- New shaders FX.
- New material system (replace old palettes and colors).
- Split of annotations (old grease pencil) and new grease pencil object.
- UI adapted to blender 2.8.
You can get more info here:
https://code.blender.org/2017/12/drawing-2d-animation-in-blender-2-8/
https://code.blender.org/2018/07/grease-pencil-status-update/
This is the result of nearly two years of development and I want thanks firstly the other members of the grease pencil team: Daniel M. Lara, Matias Mendiola and Joshua Leung for their support, ideas and to keep working in the project all the time, without them this project had been impossible.
Also, I want thanks other Blender developers for their help, advices and to be there always to help me, and specially to Clément Foucault, Dalai Felinto, Pablo Vázquez and Campbell Barton.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Strip unindented comment blocks - mainly headers to avoid conflicts.
|
|
|
|
|
|
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
|
|
|
|
This is not reported anywhere, but it's easy to reproduce. I ran into this
while updating this code for the blender2.8 branch.
|
|
While getting rid of Scene->base we got the following fixes:
* Fix "Convert To" operator
* Fix "NLA allowing to selected objects that are not selectable
* Fix scene.objects (readonly, no option to link/unlink)
Note: Collada needs to use the context SceneLayer for adding objects
however I added a placeholder, so Collada maintainers can fix this
properly.
|
|
Design Documents
----------------
* https://wiki.blender.org/index.php/Dev:2.8/Source/Layers
* https://wiki.blender.org/index.php/Dev:2.8/Source/DataDesignRevised
User Commit Log
---------------
* New Layer and Collection system to replace render layers and viewport layers.
* A layer is a set of collections of objects (and their drawing options) required for specific tasks.
* A collection is a set of objects, equivalent of the old layers in Blender. A collection can be shared across multiple layers.
* All Scenes have a master collection that all other collections are children of.
* New collection "context" tab (in Properties Editor)
* New temporary viewport "collections" panel to control per-collection
visibility
Missing User Features
---------------------
* Collection "Filter"
Option to add objects based on their names
* Collection Manager operators
The existing buttons are placeholders
* Collection Manager drawing
The editor main region is empty
* Collection Override
* Per-Collection engine settings
This will come as a separate commit, as part of the clay-engine branch
Dev Commit Log
--------------
* New DNA file (DNA_layer_types.h) with the new structs
We are replacing Base by a new extended Base while keeping it backward
compatible with some legacy settings (i.e., lay, flag_legacy).
Renamed all Base to BaseLegacy to make it clear the areas of code that
still need to be converted
Note: manual changes were required on - deg_builder_nodes.h, rna_object.c, KX_Light.cpp
* Unittesting for main syncronization requirements
- read, write, add/copy/remove objects, copy scene, collection
link/unlinking, context)
* New Editor: Collection Manager
Based on patch by Julian Eisel
This is extracted from the layer-manager branch. With the following changes:
- Renamed references of layer manager to collections manager
- I doesn't include the editors/space_collections/ draw and util files
- The drawing code itself will be implemented separately by Julian
* Base / Object:
A little note about them. Original Blender code would try to keep them
in sync through the code, juggling flags back and forth. This will now
be handled by Depsgraph, keeping Object and Bases more separated
throughout the non-rendering code.
Scene.base is being cleared in doversion, and the old viewport drawing
code was poorly converted to use the new bases while the new viewport
code doesn't get merged and replace the old one.
Python API Changes
------------------
```
- scene.layers
+ # no longer exists
- scene.objects
+ scene.scene_layers.active.objects
- scene.objects.active
+ scene.render_layers.active.objects.active
- bpy.context.scene.objects.link()
+ bpy.context.scene_collection.objects.link()
- bpy_extras.object_utils.object_data_add(context, obdata, operator=None, use_active_layer=True, name=None)
+ bpy_extras.object_utils.object_data_add(context, obdata, operator=None, name=None)
- bpy.context.object.select
+ bpy.context.object.select = True
+ bpy.context.object.select = False
+ bpy.context.object.select_get()
+ bpy.context.object.select_set(action='SELECT')
+ bpy.context.object.select_set(action='DESELECT')
-AddObjectHelper.layers
+ # no longer exists
```
|
|
This reverts commit 5aa19be91263a249ffae75573e3b32f24269d890 and b4a721af694817fa921b119df83d33ede7d7fed0.
Due to postponement of particle system rewrite it was decided to put particle code
back into the 2.8 branch for the time being.
|
|
Conflicts:
intern/ghost/intern/GHOST_ContextCGL.mm
intern/ghost/intern/GHOST_WindowCocoa.mm
source/blender/makesrna/intern/rna_main.c
|
|
Was using a bunch of different spellings, mostly "data-block" though, so went with that one (would have been my #1 choice anyway ;) )
|
|
Conflicts:
release/scripts/startup/bl_ui/properties_particle.py
release/scripts/startup/bl_ui/properties_physics_cloth.py
release/scripts/startup/bl_ui/properties_physics_dynamicpaint.py
release/scripts/startup/bl_ui/properties_physics_softbody.py
source/blender/blenkernel/BKE_library.h
source/blender/blenkernel/BKE_particle.h
source/blender/blenkernel/intern/cloth.c
source/blender/blenkernel/intern/library.c
source/blender/blenkernel/intern/library_query.c
source/blender/blenkernel/intern/particle_system.c
source/blender/blenkernel/intern/scene.c
source/blender/blenkernel/intern/softbody.c
source/blender/blenloader/intern/readfile.c
source/blender/blenloader/intern/versioning_270.c
source/blender/editors/space_file/filesel.c
source/blender/editors/space_outliner/outliner_intern.h
source/blender/makesdna/DNA_ID.h
source/blender/makesdna/DNA_object_force.h
source/blender/makesdna/DNA_particle_types.h
source/blender/makesrna/intern/rna_particle.c
source/blender/makesrna/intern/rna_sculpt_paint.c
source/blender/makesrna/intern/rna_smoke.c
source/blender/makesrna/intern/rna_space.c
|
|
All in all, this patch adds an Alembic importer, an Alembic exporter,
and a new CacheFile data block which, for now, wraps around an Alembic
archive. This data block is made available through a new modifier ("Mesh
Sequence Cache") as well as a new constraint ("Transform Cache") to
somewhat properly support respectively geometric and transformation data
streaming from alembic caches.
A more in-depth documentation is to be found on the wiki, as well as a
guide to compile alembic: https://wiki.blender.org/index.php/
User:Kevindietrich/AlembicBasicIo.
Many thanks to everyone involved in this little project, and huge shout
out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini
and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the
custom builds and compile fixes.
Reviewers: sergey, campbellbarton, mont29
Reviewed By: sergey, campbellbarton, mont29
Differential Revision: https://developer.blender.org/D2060
|
