Age | Commit message (Collapse) | Author |
|
Was using a bunch of different spellings, mostly "data-block" though, so went with that one (would have been my #1 choice anyway ;) )
|
|
All in all, this patch adds an Alembic importer, an Alembic exporter,
and a new CacheFile data block which, for now, wraps around an Alembic
archive. This data block is made available through a new modifier ("Mesh
Sequence Cache") as well as a new constraint ("Transform Cache") to
somewhat properly support respectively geometric and transformation data
streaming from alembic caches.
A more in-depth documentation is to be found on the wiki, as well as a
guide to compile alembic: https://wiki.blender.org/index.php/
User:Kevindietrich/AlembicBasicIo.
Many thanks to everyone involved in this little project, and huge shout
out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini
and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the
custom builds and compile fixes.
Reviewers: sergey, campbellbarton, mont29
Reviewed By: sergey, campbellbarton, mont29
Differential Revision: https://developer.blender.org/D2060
|
|
Apparently this is the result of some sloppiness during 2.5 project and since then it confused people who were trying to understand the area-region relation (myself included).
Sorry if this causes merge conflicts for anyone, but at some point we really had to do it :/
|
|
By popular request, restored the ability to shift-click on the X (unlink) button
to unlink the action (from the active action slot), clear the Fake User, and
also remove the NLA-stashed copy (only works for the current object/NLA stack though).
|
|
To help make it more convenient to edit stashed actions, Shift-Tab
(i.e. holding down the Shift key, which "tabbing" into tweakmode as
usual to edit the action referenced by the active NLA strip) now flags
the NLA Track that the strip occupies as being "solo" too.
This allows you to use the NLA to select a stashed action, then Shift-Tab
to start editing it without any other actions in the NLA stack interfering.
Like the "Next/Previous Layer" tools in the Action Editor, this is designed
to help with checking on stashed actions.
|
|
|
|
(NLA buttons support to come)
After looking into this more carefully, I've found that we do in fact need a dedicate
operator to add some custom logic when trying to unlink an action from the editor/datablocks.
Specifically, this new operator does the following:
1) When in Tweak Mode, it shouldn't be possible to unlink the active action,
or else, everything turns to custard.
2) If the Action doesn't have any other users, the user should at least get
a warning that it is going to get lost.
3) We need a convenient way to exit Tweak Mode from the Action Editor
4) If none of the above apply, we can just unlink normally
This commit implements this for the Action Editor, with stubs for the NLA Editor too.
Those will be fixed next.
|
|
Steps to reproduce:
1) Create an object, animated with shape keys
2) Copy it with Alt-D
3) Push action down to nla track
4) Select that track and delete it
In attached file 1-3 steps are completed.
{F138559}
Alexander (Blend4Web Team)
Reviewers: aligorith
Subscribers: yurikovelenov, Evgeny_Rodygin, valentin_b4w, AlexKowel
Differential Revision: https://developer.blender.org/D1015
|
|
This merge-commit brings in a number of new features and workflow/UI improvements for
working with Grease Pencil. While these were originally targetted at improving
the workflow for creating 3D storyboards in Blender using the Grease Pencil,
many of these changes should also prove useful in other workflows too.
The main highlights here are:
1) It is now possible to edit Grease Pencil strokes
- Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions
to enter "Stroke Edit Mode". In this mode, many common editing tools will
operate on Grease Pencil stroke points instead.
- Tools implemented include Select, Select All/Border/Circle/Linked/More/Less,
Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete.
- Proportional Editing works when using the transform tools
2) Grease Pencil stroke settings can now be animated
NOTE: Currently drivers don't work, but if time allows, this may still be
added before the release.
3) Strokes can be drawn with "filled" interiors, using a separate set of
colour/opacity settings to the ones used for the lines themselves.
This makes use of OpenGL filled polys, which has the limitation of only
being able to fill convex shapes. Some artifacts may be visible on concave
shapes (e.g. pacman's mouth will be overdrawn)
4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing
has been added which draws strokes as a series of screen-aligned discs.
While this was originally a partial experimental technique at getting better
quality 3D lines, the effects possible using this technique were interesting
enough to warrant making this a dedicated feature. Best results when partial
opacity and large stroke widths are used.
5) Improved Onion Skinning Support
- Different colours can be selected for the before/after ghosts. To do so,
enable the "colour wheel" toggle beside the Onion Skinning toggle, and set
the colours accordingly.
- Different numbers of ghosts can be shown before/after the current frame
6) Grease Pencil datablocks are now attached to the scene by default instead of
the active object.
- For a long time, the object-attachment has proved to be quite problematic
for users to keep track of. Now that this is done at scene level, it is
easier for most users to use.
- An exception for old files (and for any addons which may benefit from object
attachment instead), is that if the active object has a Grease Pencil datablock,
that will be used instead.
- It is not currently possible to choose object-attachment from the UI, but
it is simple to do this from the console instead, by doing:
context.active_object.grease_pencil = bpy.data.grease_pencil["blah"]
7) Various UI Cleanups
- The layers UI has been cleaned up to use a list instead of the nested-panels
design. Apart from saving space, this is also much nicer to look at now.
- The UI code is now all defined in Python. To support this, it has been necessary
to add some new context properties to make it easier to access these settings.
e.g. "gpencil_data" for the datablock
"active_gpencil_layer" and "active_gpencil_frame" for active data,
"editable_gpencil_strokes" for the strokes that can be edited
- The "stroke placement/alignment" settings (previously "Drawing Settings" at the
bottom of the Grease Pencil panel in the Properties Region) is now located in
the toolbar. These were more toolsettings than properties for how GPencil got drawn.
- "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a
suggestion for an earlier discussion on developer.blender.org
- By default, the painting operator will wait for a mouse button to be pressed
before it starts creating the stroke. This is to make it easier to include
this operator in various toolbars/menus/etc. To get it immediately starting
(as when you hold down DKEy to draw), set "wait_for_input" to False.
- GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor
- Toolbar panels have been added to all the other editors which support these.
8) Pie menus for quick-access to tools
A set of experimental pie menus has been included for quick access to many
tools and settings. It is not necessary to use these to get things done,
but they have been designed to help make certain common tasks easier.
- Ctrl-D = The main pie menu. Reveals tools in a context sensitive and
spatially stable manner.
- D Q = "Quick Settings" pie. This allows quick access to the active
layer's settings. Notably, colours, thickness, and turning
onion skinning on/off.
|
|
|
|
|
|
|
|
|
|
|
|
* If channel_index = -1, the pushdown operator will try to use the active AnimData
block. To see which one this will be, check the properties (NKEY) region in NLA Editor.
* Added more detailed error handling for the various cases where things are not
in a valid state for pushing down an action. This is notably to stop scripters
from putting the NLA into an inconsistent state.
|
|
|
|
Opted to keep includes if they are used indirectly (even if removing is possible).
|
|
|
|
|
|
indent.
also indent case's within the switch (we already did both of these almost everywhere)
|
|
tweakmode, this will now result in tweakmode being exited instead of going into
a weird limbo-land where channel selection has changed (but tweakmode is still
active but not drawn)
|
|
tracks
As a convenience feature for those who are loading in action libraries and using
these to quickly block out things in the NLA editor, it is now possible to add
strips to AnimData blocks without first manually creating empty tracks to add
these strips to. Simply ensure that such empty AnimData blocks are selected
(Hint: click on the action line of the affected AnimData block to do so), and
try to add a strip normally.
|
|
|
|
and RNA for it independent of the build flag for enabling Freestyle. Suggested
by Sergey Sharybin through a code review of the branch.
* Many #ifdef WITH_FREESTYLE blocks were removed to always have Freestyle-specific
DNA file specification and RNA for it built in Blender. This will allow Freestyle
setting survive even when a non-Freestyle build is used for loading and saving
files. It is noted that operations are still conditionally built through #ifdef
WITH_FREESTYLE blocks.
* To this end, new blenkernel files BKE_freestyle.h and intern/freestyle.c have
been added. All API functions in FRS_freestyle_config.h as well as some of those
in FRS_freestyle.h were moved to the new files. Now the relocated API functions
have BKE_ prefix instead of FRS_.
|
|
Resolved conflicts:
release/datafiles/startup.blend
source/blender/editors/space_nla/nla_buttons.c
Also updated source/blender/blenkernel/intern/linestyle.c as a follow-up of
recent changes for the use of bool.
|
|
* More duplicate/wrong comments (copy+paste errors)
* Brough Calculate/Clear Motion Path UI for bones more in line with the Object
version
|
|
blocks, provided the blocks in question are in fact selected.
|
|
* Missing word in tooltip for operator
* Ensure that filters are set appropriately so that effect is visible
immediately
|
|
This commit introduces an operator in the Add menu - this operator ensures that
all selected objects have AnimData attached to them (even if they don't have any
actions/drivers yet). By doing this, these objects can at least appear in the
NLA Editor, which will allow them to have strips added to them in future without
having to create throwaway actions first (NOTE: there's still some stuff coming
to allow that).
Also, renamed NLA_OT_delete_tracks -> NLA_OT_tracks_delete
|
|
1) It made no sense to show this as the last operator which was used, since
these can only be used from the anim editors (and not the 3D View where this
panel appears most of the time)
2) Mouse select operators in other places didn't do this
3) There aren't really any editable parameters for this operator anyway
4) It's highly dependent on valid mouse coordinates as input.
Apart from that, undo still works fine, so no need to really keep this here.
|
|
* Not all supported datatypes would show up in the NLA Properties Region when
selected
* Clicking on the name part of the "Active Action" tracks now selects the
AnimData block that action is attached to
|
|
Somewhere along the line, this functionality broke, even though the code to
handle these settings was still in place for many of these. The main implication
of this fix is that it should now be possible to select a particular AnimData
block, which makes it possible to do things such as changing the action
associated with that AnimData block (i.e. via the "Animation Data" panel in the
NLA Editor), as well as other operations which I've had on the todolist for a
while. Stay tuned!
|
|
|
|
* Made Freestyle optional (turned on by default).
* Fix for missing bpath.c updates in the previous merge of trunk changes.
|
|
Conflicts resolved:
source/blender/blenloader/intern/readfile.c
source/blender/makesrna/intern/rna_scene.c
release/datafiles/startup.blend
|
|
|
|
|
|
click activated operators to prevent any further errors
|
|
Conflicts resolved:
source/blender/blenkernel/CMakeLists.txt
source/blender/blenloader/intern/readfile.c
source/blender/editors/animation/anim_filter.c
source/blender/makesrna/RNA_enum_types.h
|
|
|
|
Conflicts resolved:
source/blender/blenkernel/intern/material.c
source/blender/blenkernel/intern/subsurf_ccg.c
source/blender/blenloader/intern/readfile.c
source/blender/editors/animation/anim_channels_defines.c
source/blender/makesrna/intern/rna_scene.c
Additional changes:
* Fix for recent changes of BKE_* function renaming.
* Fix for an "attempt to free NULL pointer" in BlenderStrokeRenderer::RenderStrokeRepBasic().
|
|
|
|
Conflicts resolved:
source/blender/blenloader/intern/readfile.c
source/blender/editors/interface/resources.c
source/blender/editors/mesh/editmesh_tools.c
|
|
|
|
|
|
Conflicts resolved:
source/blender/editors/interface/resources.c
source/blender/editors/mesh/editmesh_select.c
source/blender/editors/space_view3d/drawobject.c
|
|
--debug
--debug-ffmpeg
--debug-python
--debug-events
--debug-wm
This makes debug output easier to read - event debug prints would flood output too much before.
For convenience:
--debug-all turns all debug flags on (works as --debug did before).
also removed some redundant whitespace in debug prints and prefix some prints with __func__ to give some context.
|
|
Conflicts resolved:
source/blender/blenloader/intern/readfile.c
source/blender/blenloader/intern/writefile.c
source/blender/bmesh/intern/bmesh_construct.c
source/blender/bmesh/intern/bmesh_mesh_conv.c
source/blender/bmesh/intern/bmesh_mesh_conv.h
source/blender/editors/interface/interface_templates.c
source/blender/editors/interface/resources.c
source/blender/editors/mesh/bmesh_select.c
source/blender/editors/mesh/bmesh_tools.c
source/blender/editors/space_view3d/drawobject.c
source/blender/render/intern/source/shadeoutput.c
|
|
else if's
|
|
|