| Age | Commit message (Collapse) | Author |
|---|
|
Another bunch of fixes for select keymaps (sequencer, node, nla, graph, action).
|
|
Causing a flurry of refresh file prompts post-commit,
Confusing local diffs and causing merge conflicts,
Stating the obvious; redundant and useless...
We shall not miss thou, blasted expand $keywords$
|
|
These are basically just for specifying when a speaker should fire off
it's soundclip, and as such, many NLA operations are irrelevant for
it. They can only be specified on object-level for speaker objects.
I've still got some UI tweaks I'll need to work on in order for these
to be able to be added even when the speaker doesn't have any NLA
tracks yet. (EDIT: while typing this, I had an idea for how to do
this, but that'll be for next commit). In the mean time, you'll need
to add a single keyframe for the object, snowflake that action and
delete the NLA strip before you can start editing.
|
|
|
|
Adding/Rename markers (M/Ctrl-M) were restricted to only being
available when the mouse was hovering just over the time scroller at
the bottom of animation editors, as otherwise we'd get nasty keymap
conflicts where markers keymap would block all the primary function
keymaps.
However, in the case of Adding/Renaming markers, there are no other
keys which currently conflict with these in such cases. Hence, it is
fine to let these ones be able to be run from anywhere within the
animation editors, which should make it easier to add markers for
lipsyncing purposes again for example.
|
|
|
|
|
|
|
|
1) Added a new operator to swap the order of strips within a track
(Alt-F).
This makes it possible to select two strips (or more precisely, two
islands of consecutive + selected strips) in a single track and change
the order in which the appear without needing a extra tracks to
perform the move through.
As usual, the non-overlapping rules apply, so there may be some cases
where swapping in this way is not possible without adjusting the
intermediate strips first manually. Otherwise, everything just gets
too tricky to manage deciding what adjustments should be done to the
obstructing strips to make a fit.
2) Freeing meta-strips didn't free their local data properly (i.e.
modifiers they may have had).
3) Adding strips to tracks, where the endframes for the strips
overlapped would cause problems with incorrect ordering of strips. I
still need to double-check whether evaluation works ok in this case...
|
|
This commit restores the ability to reorder channels in the animation editors (DopeSheet/Action/etc., Graph/Drivers, NLA). The hotkeys for this are:
- Shift-PageUp = Move Up
- Shift-PageDown = Move Down
- Ctrl-Shift-PageUp = Move to Top of List
- Ctrl-Shift-PageDown = Move to Bottom of List
Do note that only animation data can get reordered using this.
So, do not expect to be able to change the object order (that is actually taken from the order that Blender actually evaluates them per update/frame).
---
In the process, I've fixed a couple of other bugs:
* Removed 'optimisation step' check in anim_filter.c for dopesheet with no filtering options modified, since this meant that the ANIMFILTER_ANIMDATA data filter was not getting processed (and potentially there were other maintenance problems with that).
* Made NLA Editor's channel list not totally duplicate the basic Animation Channels keymap. Instead, the "NLA Channels" keymap now only defines the parts that are different, and this then gets specified before the standard one so that these different parts will override the standard ones.
* Attempted to fix BorderSelect on NLA Channels list. Still not totally working correctly yet though.
* Moved "Euler Discontinuity" menu entry from "Channels" to "Keys". It really belongs in the latter, since it affects the keyframe values, rather than some aspect of the channel (i.e. ordering of channels or how they're displayed)
|
|
|
|
- remove MEM_guardedalloc.h from header files (include directly)
|
|
|
|
We already have 2 keys for delete, no need to add a 3rd, better use backspace only when it makes sense or allow users to hook it up to something.
|
|
|
|
Only source/blender/editors/ dir, should not give errors on different platforms
Only removing: UI_*.h, ED_*.h, WM_*.h, DNA_*.h, IMB_*.h, RNA_*.h, PIL_*.h
|
|
|
|
* Copy/Paste operators for F-Modifiers
Available in Graph and NLA Editors. Use the Copy/Paste buttons beside the 'Add Modifier' buttons.
Copy copies all the modifiers of the ACTIVE F-Curve or Strip depending on the editor.
Paste pastes modifiers from the buffer to all the selected F-Curves or Strips, adding the new modifiers to the ends of each list.
* 'Stepped Interpolation' F-Modifier
This modifier holds each interpolated value from the F-Curve for several frames without changing the timing.
This allows to preview motions 'on-twos' for example without altering the timing, or having to go through setting heaps of keyframes. In this case, Andy wanted to use this for CG <-> StopMo.
|
|
|
|
This operator can be accessed from the "Action Clip" panel, and is used to include keyframes that have been added to a strip already in the NLA. Although this is not a recommended workflow, having this ability is useful at times.
|
|
* Moved 'change shortcut' (previously directly RMB on menu items) to a context-menu item, and added Remove Shortcut and Add Shortcut. This is all available now in a RMB context menu for operator buttons and menu entries.
* Renamed a bunch of key maps to be consistent with UI names, and human-readable. Since these key map names are now being directly used in the UI for people to find things, they should be understandable and in plain language.
This renaming may break some older saved key map setups - though previously saved .b25.blends should convert over ok. Exported .py files may need some find/replacing - in this commit check the changes in resources.c to see what's changed.
|
|
last, ACT_OT_* --> ACTION_OT_*)
ACT_OT_clean --> ACTION_OT_clean
ACT_OT_clickselect --> ACTION_OT_clickselect
ACT_OT_copy --> ACTION_OT_copy
ACT_OT_delete --> ACTION_OT_delete
ACT_OT_duplicate --> ACTION_OT_duplicate
ACT_OT_extrapolation_type --> ACTION_OT_extrapolation_type
ACT_OT_frame_jump --> ACTION_OT_frame_jump
ACT_OT_handle_type --> ACTION_OT_handle_type
ACT_OT_insert_keyframe --> ACTION_OT_insert_keyframe
ACT_OT_insert_keyframe --> ACT_OT_keyframe_insert
ACT_OT_interpolation_type --> ACTION_OT_interpolation_type
ACT_OT_keyframe_type --> ACTION_OT_keyframe_type
ACT_OT_mirror --> ACTION_OT_mirror
ACT_OT_new --> ACTION_OT_new
ACT_OT_paste --> ACTION_OT_paste
ACT_OT_previewrange_set --> ACTION_OT_previewrange_set
ACT_OT_properties --> ACTION_OT_properties
ACT_OT_sample --> ACTION_OT_sample
ACT_OT_select_all_toggle --> ACTION_OT_select_all_toggle
ACT_OT_select_border --> ACTION_OT_select_border
ACT_OT_select_column --> ACTION_OT_select_column
ACT_OT_snap --> ACTION_OT_snap
ACT_OT_test --> ACTION_OT_test
ACT_OT_unlink --> ACTION_OT_unlink
ACT_OT_view_all --> ACTION_OT_view_all
ANIM_OT_add_driver_button --> ANIM_OT_driver_button_add
ANIM_OT_add_keyingset_button --> ANIM_OT_keyingset_button_add
ANIM_OT_delete_keyframe --> ANIM_OT_keyframe_delete
ANIM_OT_delete_keyframe_button --> ANIM_OT_keyframe_delete_button
ANIM_OT_delete_keyframe_v3d --> ANIM_OT_keyframe_delete_v3d
ANIM_OT_insert_keyframe --> ANIM_OT_keyframe_insert
ANIM_OT_insert_keyframe_button --> ANIM_OT_keyframe_insert_button
ANIM_OT_insert_keyframe_menu --> ANIM_OT_keyframe_insert_menu
ANIM_OT_remove_driver_button --> ANIM_OT_driver_button_remove
ANIM_OT_remove_keyingset_button --> ANIM_OT_keyingset_button_remove
FILE_OT_add_bookmark --> FILE_OT_bookmark_add
GRAPH_OT_insert_keyframe --> GRAPH_OT_keyframe_insert
NLA_OT_add_actionclip --> NLA_OT_actionclip_add
NLA_OT_add_meta --> NLA_OT_meta_add
NLA_OT_add_tracks --> NLA_OT_tracks_add
NLA_OT_add_transition --> NLA_OT_transition_add
NLA_OT_remove_meta --> NLA_OT_meta_remove
PARTICLE_OT_remove_target --> PARTICLE_OT_target_remove
PTCACHE_OT_add_new --> PTCACHE_OT_add
|
|
* Convert all code to use new functions.
* Branch maintainers may want to skip this commit, and run this
conversion script instead, if they use a lot of math functions
in new code:
http://www.pasteall.org/9052/python
|
|
Keymaps are now saveable and configurable from the user preferences, note
that editing one item in a keymap means the whole keymap is now defined by
the user and will not be updated by Blender, an option for syncing might be
added later. The outliner interface is still there, but I will probably
remove it.
There's actually 3 levels now:
* Default builtin key configuration.
* Key configuration loaded from .py file, for configs like Blender 2.4x
or other 3D applications.
* Keymaps edited by the user and saved in .B.blend. These can be saved
to .py files as well to make creating distributable configurations
easier.
Also, user preferences sections were reorganized a bit, now there is:
Interface, Editing, Input, Files and System.
Implementation notes:
* wmKeyConfig was added which represents a key configuration containing
keymaps.
* wmKeymapItem was renamed to wmKeyMapItem for consistency with wmKeyMap.
* Modal maps are not wrapped yet.
* User preferences DNA file reading did not support newdataadr() yet,
added this now for reading keymaps.
* Key configuration related settings are now RNA wrapped.
* is_property_set and is_property_hidden python methods were added.
|
|
their handlers based on notifiers, which is simpler and more
reliable.
This fixes for example editmode or uv edit keymaps not working
when creating a new 3dview or image space.
|
|
|
|
This operator provides a quick way of toggling the muted-status of several strips at the same time.
|
|
* Added several API functions for Meta-Strips editing. One of these (flush transform) still needs a few tweaks before it does its job well enough for all cases.
* Meta strips are now drawn with a purple-ish colour. The start/end points of the strips they encompass are shown with lines along the length of the strips, with lines starting from the top indicating start-points and lines starting from the bottom indicating end-points.
* Meta strips can be made (i.e. strips can be assigned to meta-strips) by selecting some strips and pressing Shift-G.
Meta strips can be removed by selecting some meta-strips and pressing Alt-G.
* Strips can now be 'snapped' to start from: the current frame, the nearest frame, the nearest second, or the nearest marker; using the Shift-S hotkey.
'Islands' of adjacent selected strips occurring in the same track are moved together as a single strip so that the start-point of the first strip is on the sepcified time, but all the relative lengths of strips stay the same. Internally, temporary meta-strips are created to facilitate this.
|
|
* Using the Ctrl-Shift-M hotkey, F-Modifiers can be added to all the selected strips.
* F-Modifiers can also be added/tweaked from the NLA N-Key properties. The UI now uses the same code as for the graph editor ones.
The UI drawing here is currently messed up from the NLA side, since it seems combining normal layout stuff and old-style uiBlocks doesn't seem to work too well (BUT! the buttons are at least functional).
Next up, I'll need to recode the buttons panel for the Graph Editor so that all of the drawing can be migrated over to use the new layout engine.
|
|
editors
|
|
These operators may be temporary only, depending on if a workable solution via transform is found.
* PageUp moves strips into the track above if there's space
* PageDown moves strips into the track below if there's space
* Also fixed a button-alignment bug in the DopeSheet header
|
|
These two operators work only on Action-Clip strips.
* Clear (Alt-S) resets the scale of selected strips to 1.0
* Apply (Ctrl-A) applies the scale of the selected strips to their referenced Actions. If this referenced Action is also used by several other strips, a copy of the Action is made, and the scaling is applied to that Action instead.
|
|
This deletes all the strips in the relevant (selected) tracks too.
|
|
* Clicking on NLA tracks while in TweakMode now works so that channels can be muted/protected/expanded as per usual. However, they cannot be selected, as changing the selection state can interfere with TweakMode state changes
* Operators for animation channel-lists now use proper poll callbacks, which also take into account TweakMode where appropriate (i.e. all selection operators are now allowed to operate in NLA while in TweakMode, and all other operators will only work in Animation Editors)
* Action Editor operators now use the poll callback for Action Editors/DopeSheet instead of the generic active-araa one.
|
|
It is now possible to Duplicate Strips again. Strips are added into the first available space in the track above the original track (or a new track above the original if there wasn't any space).
Also, separated out the 'add' operators into their own menu. This might need to be changed later...
|
|
== Transitions ==
Transition strips are now able to be created + evaluated. Transitions allow for interpolation between the endpoints of two adjacent strips in the same track (i.e. two strips which occur in the same track one after the other, but with a gap between them).
- The current behaviour when only one endpoint affects some setting is non-optimal, since it appears somewhat inconsistently extend/replace values...
- Transform code needs a few fixes still to deal with these
== Strip Adding Operators ==
* New strips referencing Actions can be added using the Shift-A hotkey while in the strips-area. You must have a track selected first though.
The new strip will get added, starting from the current frame, in the selected track(s) only if there is enough space to do so. Otherwise, the new strip gets added at the top of the stack in a new track.
* New transition strips can be added with the Shift-T hotkey while in the strips area. You must have two adjacent strips selected for this to work.
== New Backend Methods ==
* Recoded the strip/track adding API to be more flexible
* Added a new method for testing whether F-Curve has any modifiers of with certain attributes. Will be used in a later bugfix...
== Bugfixes ==
- Fixed bug with strip-blending which caused the blending modes to be useless.
- NLA buttons now use proper poll callbacks instead of defining checks
- Commented out missing operator in menus, silencing warnings in console
- Removed obsolete/incorrect comments
|
|
In response to user-feedback, I've changed the order in which channels appear. Now, the channel ordering is:
- Object/AnimData block
-- Active Action
-- Last NLA Track
..
..
-- First NLA Track
It is important to note several things still:
1) Active action is applied AFTER the NLA Tracks have been evaluated, not before
2) In this new order, the tracks+active action are shown in the evaluation-stack order, i.e. first thing applied is at the bottom, last is at the top.
As a result, I've switched the view-orientation back so that it works the same way as for DopeSheet/Graph editors (i.e. expands downwards not upwards). This may cause problems loading files saved with older builds of this branch. There are still some lingering problems due to this change which I'll fix in due course.
|
|
New tracks can be added in the following ways (with the mouse hovering over the channels-list):
* Shift-A - this will add a new track at the top of the stack (i.e. above all the existing NLA-tracks but below the Active Action) for every AnimData block where there was a selected NLA-Track
* Ctrl-Shift-A - this will add a new track above every selected one
|
|
Selected NLA Strips are split into two strips, each with half the length of the original strip.
Possible improvements subject to demand:
- multiple splits?
- splits with variable spacing? (i.e. 3:2, or 1:5).
|
|
These work in the same way as the ones in the Action Editor...
|
|
|
|
This commit restores transform support for NLA. Grab, scale, 'extend', and tweak (i.e. grab by just click+dragging) are implemented.
Notes:
- As soon as one end of a strip touches another adjacent strip (within the same track), that end stops moving. This has been done to avoid the situation where overlapping strips within the same track (which is not allowed) might be caused by transforms.
- Made some changes to the RNA setters for the strip extents so that the validation above could take place (and other necessary changes on a per-strip basis could also occur).
TODO's ?
- Strips cannot be transferred from track to track using transforms. I've yet to decide whether this needs to be done, or whether a separate operator will suffice.
- What happens to the range of Actions used when the strips change sizes unexpectedly (i.e. the no-overlap condition above)? Currently range stays the same, but this doesn't always seem desirable?
|
|
If anyone's doing any testing at this point, please check if this works ok for files with new/old NLA Editors, as I was having some problems with one of my testing (saved from this branch) files with this.
|
|
In this commit, I've introduced the mechanism by which actions already referenced by strips used in the NLA can be edited (or 'tweaked'). To use, simply select a strip you wish to edit, and hit that TAB key to start tweaking that strip's action, and hit TAB again once you're done.
What happens when you enter 'tweak mode':
1) The action of the active strip temporarily becomes the 'active action' of the AnimData block. You are now able to edit this in one of the Animation Editors (DopeSheet/Action, Graph Editors) as per normal (i.e. sliding keyframes around, inserting keyframes, etc.). The 'action-line' will therefore get drawn immediately above the active track containing the active strip, so that it's clear that that's what we're editing.
2) All the NLA-tracks (and all the strips within them) that occur after the track that the active strip lived in get disabled while you're in tweakmode. This is equivalent to travelling back to an earlier state in a construction history stack.
3) The active NLA track also gets disabled while in tweakmode, since it would otherwise interfere with the correct functioning of the tweaking for the action of interest.
4) The 'real' active action (i.e. the one displaced by the active strip's action) gets put into temp storage, and will be restored after you exit tweakmode.
5) Any strips which also reference the action being tweaked will get highlighted in red shading to indicate that you may be making some changes to the action which you don't really want to make for the other users too.
Please note though, that this is only a rough prototype of this functionality, with some niceties still to come. i.e.:
* NLA-tracks after the active track should still get drawn above the 'tweaking action line', but perhaps with different appearance?
* Various tools will still need awareness of this to prevent corrupting operations from taking place. How to proceed is still undecided...
* When exiting tweak-mode, the strip the action came from still needs some form of syncing with the modified action... there are a few tricky issues here that will need to be solved
* Evaluation code doesn't totally take this into account yet...
---
Also, fixed a number of bugs with various code (notably selection, and also a few drawing bugs)
|
|
* Added click-select/left-right select and deselect all/invert all selection operators. For now, these basic operators will suffice (more advanced selection operators will be coded at a later stage).
* Fixed a few bugs in DopeSheet found while coding the relevant tools for NLA.
* Added custom border-select operator for NLA channels (since the standard one assumes negative direction channel order)
* Added new API-method for NLA strips to check if the strip occurs within a given range, since this test needed to be performed in a few places...
* Tweaked the NLA Editor View2D ranges a bit to give saner default sizing. This still isn't right yet though.
|
|
'UI Work'
* Added more drawing code for drawing NLA data
* Made the operators for the 'channel-list' of NLA work. A special version of borderselect for the NLA channel-list (due to the different vertical order) still needs to be coded though.
'Push Down' tool
The active action of each AnimData block, represented by the reddy/orange channel, can be added to the NLA stack as a new action by using the 'snow-flake' icon/button (probably need a special icon for this later). This will add a new NLA track and an NLA strip referencing this action. The AnimData block's 'active action' slot will then be left empty.
(Unfortunately, there still seems to be a bug here, which I'll check on later)
|
|
Implemented some basic strip-drawing code with some hardcoded colours. These colours will be made into theme colours at some point, but the aim is to use different colours as indicators of the 'state' of the strip (i.e. active/being tweaked, uses the same action as the strip being tweaked, selected, normal).
This is not yet usable though...
|
