Age | Commit message (Collapse) | Author |
|
Ref T92709
|
|
Some operations, e.g. adding a new action strip to NLA, require
knowing the active frame range of an action. However, currently it
can only be deduced by scanning the keyframes of the curves within
it. This is not ideal if e.g. curves are staggered for overlap.
As suggested by Nathan Vegdahl in comments to T54724, this patch adds
Action properties that allow manually specifying its active frame range.
The settings are exposed via a panel in the Dopesheet and Action Editor.
When enabled, the range is highlighted in the background using a striped
fill to distinguish it from the solid filled regular playback range.
When set, the frame range is used when adding or updating NLA tracks,
and by add-ons using `Action.frame_range`, e.g. FBX exporter.
Differential Revision: https://developer.blender.org/D11803
|
|
The current `ICON_SMALL_TRI_RIGHT_VEC` uses dark hard-coded colors ([`0.2`, `0.2`, `0.2`])
which makes it impossible to theme and hard to see in dark contexts.
Use `ICON_RIGHTARROW` to match the Outliner's breadcrumbs. This icon uses `TH_TEXT` so it's visible as long as the rest of the text is.
##### Master
(Properties editor background made red on purpose to be able to see the triangle icon)
{F11713038, size=full}
#### This patch
{F11713039, size=full}
Reviewed By: #user_interface, Severin, HooglyBoogly
Maniphest Tasks: T92771
Differential Revision: https://developer.blender.org/D13106
|
|
Thanks to Dr. Sybren for pointing it out!
|
|
The NLA editor is in need of a design overhaul, hopefully for 3.1 or 3.2.
This should be a project on itself, however, the worst offender currently is the use of
gradients on strips. Something that can be fixed easily.
{F11390293, size=full, loop, autoplay}
A simple replace of `UI_draw_roundbox_shade_x` for `UI_draw_roundbox_4fv` brings strips
in line with how other areas are drawn.
This patch also:
* Remove embossed lines around active action channel.
* Highlight the strip while being moved.
This patch does not include any theme changes. This will be tackled separately.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D12968
|
|
This is available in the DopeSheet, GraphEditor, and NLA Editor.
Currently:
- Dopesheet advertises to take selection into account...
-- ...but doesnt - which might be a mistake in rBe3842d1ca4dd
- Graph Editor does not mention selection...
-- ...and also does not take it into account
- NLA does not mention selection...
-- ...but takes it into account
Now:
- make them **all** take selection into account (you can still do a
quick 'Select All' prior to get the full range -- better than not being
able to set this based on selection)
- mention this for all in the tooltip
- also reword to 'Set Preview Range to Selected' since using the term
'Auto' impilies this would change on selection change.
Maniphest Tasks: T91743
Differential Revision: https://developer.blender.org/D12651
|
|
Currently the Drivers Editor shows this (the blue thing can be dragged
to change frame):
{F10647661}
But the Drivers Editors X axis is the output of the driver [which can be
further tweaked by the curve] not time(frame).
So it seems better to not mix them here, it is just confusing to have
two different units on one axis.
Especially since what we really want to look at in X (the drivers output
value) can be in a totally unrelated range compared to frames, so e.g.
we might be interested in a drivers range from 0.0 to 1.0 and a
framerange of 100 to 200, so putting this on one axis just does not make
sense. Better to use a separate timeline for this.
Note 2.79 also did not do this.
Maniphest Tasks: T91157
Differential Revision: https://developer.blender.org/D12392
|
|
No functional change.
The shader is complicated by itself, having hardcoded values makes it
even more cryptic.
I also renamed the shader because the shader is not for the keyfarme diamond only,
but for all the keyframe shapes.
Differential Revision: https://developer.blender.org/D12615
|
|
Selection was already accessible but not active.
Add utility functions:
- ANIM_nla_context_track to access the active track,
following the convention of ANIM_nla_context_strip.
- ANIM_nla_context_*_ptr versions of these functions,
needed to for creating context members to access the ID pointer.
Part of fix for T90723.
|
|
Comment was pasted from entering tweakmode.
|
|
This change reduces the GPU context switches when drawing keyframes.
In the previous situation the keyframe blocks and keyframe keys were
drawn per channel. With this patch first all the keyframe blocks are
drawn for all channels and after that the keyframe keys are collected
for all channels and send to the GPU in a single draw call.
|
|
The poll for unlinking calls `nla_panel_context` without providing an
adt pointer, and there is a check for this pointer in
`nla_panel_context` leading to never returning true if it is not
provided. (this is fine if there are tracks already, poll would succeed
in this case, `nla_panel_context` goes a different code path then)
Same call to `nla_panel_context` is also done in the beginning of the
corresponding unlink exec function (but this time providing the pointer
because it is used later), so it makes sense to do the same thing in the
poll function. Equal check is also done in the panel poll function, so
now these are all in sync.
Part of T87681.
Maniphest Tasks: T87681
Differential Revision: https://developer.blender.org/D11041
|
|
For T78995 we want to change the data structure of keylists to
improve performance. (Probably a Vector with bin-search capabilities).
This patch hides the internal structure of the keylists behind `AnimKeylist`
structure. This allows us to change the internals without 'breaking' where it is
being used.
The change adds functions to create, free, find and walk over the
keylist.
Reviewed By: sybren
Maniphest Tasks: T78995
Differential Revision: https://developer.blender.org/D11974
|
|
Add overlay option to disable grid drawing.
Reuse drawing code from other editors (timeline editor)
Add argument `display_minor_lines` to function
`UI_view2d_draw_lines_x__discrete_frames_or_seconds`
This way minor line drawing can be disabled and so it doesn't cause
too much visual noise. Also spacing seems to be too fine, so VSE uses 3x
what is defined in preferences.
Reviewed By: fsiddi, Severin
Differential Revision: https://developer.blender.org/D11790
|
|
The keylist functions are used in other places for none drawing related
stuff. Fe pose_slide uses it.
|
|
Use the term `ensure` as existing data is used when present.
|
|
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
|
|
|
|
|
|
Following naming convention of most operators.
|
|
This patch implements the list panel system D7490 for FCurve modifiers.
The UI layouts are updated to make use of subpanels and to be consistent
with the rest of the interface, and easier to understand.
See the differential revision for screenshots.
This commit also significantly cleans up the FModifier UI code, and
improves, mainly by replacing the old button creation code is with
the newer interface API using RNA. In turn there is a bit of complexity
added because each FModifier has a separate panel.
Although reordering of FModifiers was not implemented before, we get
drag and drop basically for free here, so it is also included.
As noted in some older to do tasks, FModifiers aren't evaluated
in perfect order, which may be a point of improvement for the future.
Differential Revision: https://developer.blender.org/D7997
|
|
|
|
|
|
Remove redundant headers using
`./source/tools/utils_maintenance/code_clean.py`
Reviewed By: jmonteath
Ref D10364
|
|
|
|
Passing 4x arguments for the rectangle,
mixed in with round-box radius & color wasn't very readable.
Instead, pass a `rctf` as the first argument to UI box drawing functions.
|
|
|
|
This is done by convention in the outliner and dope-sheet.
Missing edit-mode exit causes glitches with mixed object/edit-mode undo.
|
|
|
|
These functions with many arguments can be unwieldy. Aside from the obvious issues
with rewriting the list of arguments and the opportunities for error and frustration
that presents, the long list of arguments make these systems hard to change. So when
an argument should be added, someone might skip that and add some hack instead.
So, as proposed in T73586#1037210, this patch instead uses a "params" struct for
each of these callbacks.
- Use param argument for `ARegionType.listener`
- Remove unused window field in region listener
- Use param argument for `SpaceType.listener`
- Use params struct for `ARegionType.message_subscribe`
Differential Revision: https://developer.blender.org/D9750
|
|
Outliner display under 'Animation' > 'NLA Tracks' was not updating in
the following cases:
- adding strips
- removing strips
- duplicating strips (possibly to different track)
- swapping strips
- reordering tracks
- changing strip order by translating
- translating strips between tracks
- renaming tracks
In the case of deleting strips/tracks, this was also resulting in a use-
after-free error in Outliner drawing code (this was reported specifically
in T84586).
Most of these operators already sent a ND_NLA|NA_EDITED notifier, but the
Outliner is not listening to these. Listening to NA_EDITED is also not
what we want since this also happens a lot in cases irrelevant to the
Outliner. Now be a bit more specific and send ND_NLA|NA_ADDED / ND_NLA|
NA_REMOVED or a new ND_NLA_ORDER (to distinguish from NA_EDITED
'only' - where a redraw is not neccessary) and listen to these from the
Outliner.
(note: places that were listening to ND_NLA|NA_EDITED before are also
listening to NA_ADDED or NA_REMOVED, so changing NA_EDITED should not be
a problem here)
(note 2: for cases like swapping tracks/strips order, NA_ADDED or
NA_REMOVED does not make sense, neither can we use NA_EDITED [since we
dont want to listen to this], so in this case an additional ND_NLA_ORDER
is now sent)
(note 3: in nla transform code, this is now always sent on confirm. There
are cases were the notifier would not be needed, but checking exactly all
cases were it actually would be needed seems overkill [history of D10073
has example code to check if strips moved between tracks])
Maniphest Tasks: T84586
Differential Revision: https://developer.blender.org/D10073
|
|
Partially reverts 2250b5cefee7.
Removing the user count and fake user count icons was controversial (which was
expected) and there are a few further changes needed, that won't make it in
time for the release, see D9946.
While there is a design to bring back the user count and fake user indicators,
a new design idea was proposed that the UI team wants to follow. This came too
late for the 2.92 release, the new design is targeted at the 2.93 release now.
Meanwhile, UI team decision was to simply revert the design changes.
The new design is being worked on in https://developer.blender.org/T84669.
Note that this commit does not revert some internal changes done in
2250b5cefee7. Namely the introduction of `ed_util_ops.c` and data-block
operators in there. These will still be needed in the new design.
|
|
- Remove ternary operators when both values are the same.
- Remove break after return.
- Remove redundant NULL checks for code which handles
those cases immediately beforehand.
|
|
Approximately 138 changes in the spelling of compound words
and proper names like "Light Probe", "Shrink/Fatten", "Face Map".
In many cases, hyphens were used where they aren't correct, like
"re-fit". Other common changes include:
- "Datablock" -> "data-block"
- "Floating point" -> "floating-point"
- "Ngons" -> "n-gons"
These changes help give the language used in the interface
a consistent, more professional feel.
Differential Revision: https://developer.blender.org/D9923
|
|
Approximately 195 changes of capitalization to conform to MLA title style.
UI labels and property names should use MLA title case, while descriptions
should be capitalized like regular prose, generally with only the start of
a sentence capitalized.
Differential Revision: https://developer.blender.org/D9922
|
|
This bug was caused by making it so that non-embossed modifier icon
buttons could become an operator button and retain their red highlight
for disabled modifiers. The icon button needs emboss turned off, but
in earlier versions of Blender, `UI_EMBOSS_NONE` would be overridden
by animation or red alert states.
Instead of abusing "NONE" to mean "none unless there is animation or
red alert", this commit adds a new emboss flag for that situation,
`UI_EMBOSS_NONE_OR_STATUS`, which uses no emboss unless there is an
animation state, or another status. There are only a few situations
where this is necessary, so the change isn't too big.
Differential Revision: https://developer.blender.org/D9902
|
|
The previous design is rather old and has a couple of problems:
* Scalability: The current solution of adding little icon buttons next to the
data-block name field doesn't scale well. It only works if there's a small
number of operations. We need to be able to place more items there for better
data-block management. Especially with the introduction of library overrides.
* Discoverability: It's not obvious what some of the icons do. They appear and
disappear, but it's not obvious why some are available at times and others
not.
* Unclear Status: Currently their library status (linked, indirectly linked,
broken link, library override) isn't really clear.
* Unusual behavior: Some of the icon buttons allow Shift or Ctrl clicking to
invoke alternative behaviors. This is not a usual pattern in Blender.
This patch does the following changes:
* Adds a menu to the right of the name button to access all kinds of operations
(create, delete, unlink, user management, library overrides, etc).
* Make good use of the "disabled hint" for tooltips, to explain why buttons are
disabled. The UI team wants to establish this as a good practise.
* Use superimposed icons for duplicate and unlink, rather than extra buttons
(uses less space, looks less distracting and is a nice + consistent design
language).
* Remove fake user and user count button, they are available from the menu now.
* Support tooltips for superimposed icons (committed mouse hover feedback to
master already).
* Slightly increase size of the name button - it was already a bit small
before, and the move from real buttons to superimposed icons reduces usable
space for the name itself.
* More clearly differentiate between duplicate and creating a new data-block.
The latter is only available in the menu.
* Display library status icon on the left (linked, missing library, overridden,
asset)
* Disables "Make Single User" button - in review we weren't sure if there are
good use-cases for it, so better to see if we can remove it.
Note that I do expect some aspects of this design to change still. I think some
changes are problematic, but others disagreed. I will open a feedback thread on
devtalk to see what others think.
Differential Revision: https://developer.blender.org/D8554
Reviewed by: Bastien Montagne
Design discussed and agreed on with the UI team, also see T79959.
|
|
Also makes NLA tracks and strips overridable.
User can either edit existing strips in existing NLA tracks (but not add or remove them), and/or add new NLA tracks after those comming from the linked data.
Most of the work was as usual checking operators and adding protections against illegal operations in override context.
Note that since we can only rely on indices to deal with local added tracks, we forbid any local track being before any linked/original track.
Maniphest Tasks: T72629
Differential Revision: https://developer.blender.org/D9611
|
|
The overlap with the `Panel` flags that start with "PNL" was quite
confusing because wasn't clear which enum a flag was from. The
new names are a bit longer, but the clarity is worth it.
|
|
For example, outlinertest.blend from test240.zip.
|
|
Add "Selection to" as prefix for those menu items that move the selected
keyframes to something, for both the Key → Snap menu and the Shift+S pie
menu.
No functional changes.
This was missed in rB477d983c2e8ab298cbf638d5aadd77fad9c2f677
Differential Revision: https://developer.blender.org/D9304
|
|
Split up `ANIM_deselect_anim_channels()` into
`ANIM_anim_channels_select_set()` and
`ANIM_anim_channels_select_toggle()`.
`ANIM_anim_channels_select_set()` is equivalent to the old
`ANIM_deselect_anim_channels(..., false, ACHANNEL_SETFLAG_xxx)`.
`ANIM_anim_channels_select_toggle()` is equivalent to the old
`ANIM_deselect_anim_channels(..., true, ACHANNEL_SETFLAG_ADD)`.
`ANIM_deselect_anim_channels(..., true, ACHANNEL_SETFLAG_CLEAR)` was
also called once. The `true` parameter suggested the "toggle" behaviour
was intended, but the `ACHANNEL_SETFLAG_CLEAR` argument prevented any
toggling. This is now replaced with `ANIM_anim_channels_select_set(ac,
ACHANNEL_SETFLAG_CLEAR)` to make this explicit.
No functional changes, just a cleanup in order to better understand how
the selection works.
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
Those were only shallow wrappers around `BKE_id_copy`, barely used (even
fully unused in some cases), and we want to get rid of those ID-specific
helpers for the common ID management tasks. Also prevents weird custom
behaviors (like `BKE_object_copy`, who was the only basic ID copy
function to reset user count of the new copy to zero).
Part of 71219.
|
|
Tag an Action for recalculating animation when it's pushed down onto the
NLA stack, as its effective boundaries change. Normally an Action spans
all of the timeline, and the effects of Cycle modifiers are visible
everywhere. When the Action is converted to an NLA clip, the modifier's
effect should only be visible for the duration of the NLA clip.
|
|
Remove `ID_RECALC_COPY_ON_WRITE` when tagging `ID_RECALC_ANIMATION`; the
former is unnecessary when using the latter.
No functional changes.
|
|
Currently, it's difficult to use the NLA system for users who are only
interested in using it as animation layers.
Entering tweak mode hides strips which are not evaluated. If the user
wanted to edit a different strip, they must exit tweak mode, look for
the strip, select it then re-enter tweak mode.
Solution:
All strips are always shown. The user can now see the next strip they
want to start editing.
Reviewed By: Sybren, Sebastian Parborg
Differential Revision: http://developer.blender.org/D7600
|
|
|