| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds the ability to mute individual wires in the node editor.
This is invoked like the cut links operator but with a new shortcut.
Mute = Ctrl + Alt
Cut = Ctrl
Dragging over wires will toggle the mute state for that wire.
The muted wires are drawn in red with a bar across the center.
Red is used in the nodes context to indicate invalid links, muted links and internal links.
When a wire is muted it exposes the original node buttons which are normally hidden when a wire is connected.
Downstream and upstream links connected using reroute nodes are also muted.
Outside scope of patch:
- Add support for pynodes e.g. Animation Nodes
- Requires minor change to check for muted links using the `is_muted` link property or the `is_linked` socket property.
Maniphest Tasks: T52659
Differential Revision: https://developer.blender.org/D2807
|
|
In the current implementation, cryptomatte passes are connected to the node
and elements are picked by using the eyedropper tool on a special pick channel.
This design has two disadvantages - both connecting all passes individually
and always having to switch to the picker channel are tedious.
With the new design, the user selects the RenderLayer or Image from which the
Cryptomatte layers are directly loaded (the type of pass is determined by an
enum). This allows the node to automatically detect all relevant passes.
Then, when using the eyedropper tool, the operator looks up the selected
coordinates from the picked Image, Node backdrop or Clip and reads the picked
object directly from the Renderlayer/Image, therefore allowing to pick in any
context (e.g. by clicking on the Combined pass in the Image Viewer). The
sampled color is looked up in the metadata and the actual name is stored
in the cryptomatte node. This also allows to remove a hash by just removing
the name from the matte id.
Technically there is some loss of flexibility because the Cryptomatte pass
inputs can no longer be connected to other nodes, but since any compositing
done on them is likely to break the Cryptomatte system anyways, this isn't
really a concern in practise.
In the future, this would also allow to automatically translate values to names
by looking up the value in the associated metadata of the input, or to get a
better visualization of overlapping areas in the Pick output since we could
blend colors now that the output doesn't have to contain the exact value.
Idea + Original patch: Lucas Stockner
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D3959
|
|
This Patch removes the auto sorting from Multi-Input Sockets and allows
the links to be sorted by drag and drop instead.
As a minor related change, it fixes the drawing of the mute line to
connect to the first input instead of the socket's center.
|
|
Caused by {rB85421c4fab02}.
Above commit treated `SOCK_RGBA` and `SOCK_STRING` the same in
`std_node_socket_draw`.
That would turn a RGBA button into a text button (for attribute search),
leading to trouble.
Note these were just treated the same prior to above commit because both
were doing the layout split.
Now just give RGBA sockets their own case.
Maniphest Tasks: T86373
Differential Revision: https://developer.blender.org/D10646
|
|
This commit adds a search for existing attributes when you click
on an attribute field. This is useful because otherwise you have
to remember which attributes should be available at each node in
the tree.
The fundamental complication is that this information is not
accessible statically. So the search data is only a cache from
the previous node tree evaluation. The information is added
with `BKE_nodetree_attribute_hint_add`, currently for every
input geometry socket for a single node.
This is only an initial implementation, and later versions will
expose the data type and domain of the attributes.
Differential Revision: https://developer.blender.org/D10519
|
|
This commit tweaks how virtual sockets (unconnected node group input
and output sockets) are drawn to make them more recognizable. The
outline is changed to a gray color, and they get a dark inner color.
Differential Revision: https://developer.blender.org/D10080
|
|
This commit makes links connected to multi-input sockets spread verticaly
along the socket. Sockets grow if more links are connected and the node
layout updates accordingly. Links are sorted by their incoming angle
to avoid crossing links. Also, link picking is updated to work with
spread links and bezier links.
Currently the multi-input sockets are used in the join geometry node.
The mutli-input sockets look like a vertical rounded rectangle.
Currently they do not support the other custom socket shapes.
Reviewed By Hans Goudey, with cleanup and additional edits
Differential Revision: https://developer.blender.org/D10181
|
|
This commit moves the property layout callbacks for node types to their
implementation files from `drawnode.c`. This was proposed a while ago in
T75724.
**Benefits**
- Fewer files need to be changed when adding a new node.
- Makes it possible to reuse functions from the node's implementation
in the layout code.
- Except for RNA, all of the node "inputs" are in the same place.
- Code gets shorter overall, avoids the large switch statements.
**Downsides**
- Requires including two UI headers.
- Requires adding an editors dependency to the nodes folder.
This commit only changes function nodes and geometry nodes, more can be
moved later.
Differential Revision: https://developer.blender.org/D10352
|
|
This node takes a volume and generates a mesh on it's "surface".
The surface is defined by a threshold value.
Currently, the node only works on volumes generated by the
Points to Volume node. This limitation will be resolved soonish.
Ref T84605.
Differential Revision: https://developer.blender.org/D10243
|
|
When the pivot axis is not set to auto, the node will try to align the rotation
to vector as best as possible, given the selected rotation axis.
Ref T85211.
Differential Revision: https://developer.blender.org/D10292
|
|
This node calculates a distance from each point to the closest position
on a target geometry, similar to the vertex weight proximity modifier.
Mapping the output distance to a different range can be done with an
attribute math node after this node.
A drop-down changes whether to calculate distances from points,
edges, or faces. In points mode, the node also calculates distances
from point cloud points.
Design task and use cases: T84842
Differential Revision: https://developer.blender.org/D10154
|
|
|
|
Implements a node to get collection objects.
These objects are then passed along as instances in the node tree.
Follow up tasks:
Multiple nodes does not support instancing yet: T85159
Changing collection offset does not trigger a refresh: T85274
Reviewed By: Jacques, Dalai, Hans
Differential Revision: http://developer.blender.org/D10151
|
|
This adds the ability to use all the math operations in the regular
utility "Math" node. The code is quite similar to the attribute vector
math node, with the simplification that the result is always a float.
Differential Revision: https://developer.blender.org/D10199
|
|
This implements a new geometry node based on T84606.
It is the first node that generates a `VolumeComponent`.
Differential Revision: https://developer.blender.org/D10169
|
|
|
|
In the CompositorOperation::deinitExecution the viewer could be freed at
the same time it was drawn in the image editor or node editor. There is
a guard for that but wasn't added during the migration of the two
editors to the draw manager.
|
|
Passing 4x arguments for the rectangle,
mixed in with round-box radius & color wasn't very readable.
Instead, pass a `rctf` as the first argument to UI box drawing functions.
|
|
This node allows sampling a texture for every vertex based on some
mapping attribute. Typical attribute names are the name of a uv map
(e.g. "UVMap") and "position". However, every attribute that can be
converted to a vector implicitly is supported.
It should be noted that as of right now, uv map attributes can only be
accessed after a Point Distribute node.
Ref T82584.
Differential Revision: https://developer.blender.org/D10121
|
|
This commit moves runtime-only variables from the `SpaceNode`
DNA struct to a private struct in `node_intern.h`. Before, it was hard
to tell which data needed to be saved in files, this should make it
more clear.
Node that the `edittree` field is basically a runtime variable, since
it's set from the `treepath` list on read, but moving it would require
some more invasive changes that I don't think are worth it right now.
Also, not all of the moved variables were explicitly cleared on read--
`aspect` is set at the start of a redraw, `cursor` is set in a region
callback, and `recalc` was used as an update flag.
Differential Revision: https://developer.blender.org/D10141
|
|
|
|
By design the modified object transformations should still work and
affect the geometry nodes results. The current behaviour, however, would
make the geometry from the object info to not be affected by the
modified object transformations. This patch changes that by default.
In a similar fashion the Location, Rotation and Scale sockets outputs
should be aware of whether the output should be in the global space or in the
space of the nodetree.
To solve this, the patch introduces a new transformation space "enum"
where users can pick "Original" or "Relative" space.
Original
--------
Output the geometry relative to the input object transform, and the
location, rotation and scale relative to the world origin.
Relative
--------
Bring the input object geometry, location, rotation and scale into the
modified object maintaining the relative position between the two objects in
the scene.
Relative space violates a bit the design of the nodetree. The geometry in this
case is transformed so that moving the modified object doesn't interfere with
the geometry. This is particularly useful for the boolean node for instance.
"Original" is the default space, but old files are set to "Relative" for
backwards compatibility.
Differential Revision: https://developer.blender.org/D10124
|
|
Also includes some various other minor cleanups, like using bool
instead of int in a couple places.
|
|
The green is still distinct from the more turquoise use for geometry, and
they are never used in the same node graph. The use of red makes sense, but
would need changes to other sockets and categories to set it apart well.
Ref T82689
|
|
The translate node moves every point in the geometry, and the scale
node multiplies the "scale" attribute of the input geometry by its input.
While these operations are already possible with the "Attribute" nodes,
these new nodes fit nicely with the nodes specifically for changing the
"rotation" attribute that already exist, and they provide a simpler way
to do the same thing.
Differential Revision: https://developer.blender.org/D10100
|
|
The shade is too close to RGBA sockets.
Related to T82689
|
|
This is consistent with the other node names, giving (almost) all of the
nodes in the "Point" category the same prefix.
|
|
Partially reverts 2250b5cefee7.
Removing the user count and fake user count icons was controversial (which was
expected) and there are a few further changes needed, that won't make it in
time for the release, see D9946.
While there is a design to bring back the user count and fake user indicators,
a new design idea was proposed that the UI team wants to follow. This came too
late for the 2.92 release, the new design is targeted at the 2.93 release now.
Meanwhile, UI team decision was to simply revert the design changes.
The new design is being worked on in https://developer.blender.org/T84669.
Note that this commit does not revert some internal changes done in
2250b5cefee7. Namely the introduction of `ed_util_ops.c` and data-block
operators in there. These will still be needed in the new design.
|
|
This commit adds the "Save as Render" feature to the file output node,
that allows to disable the application of the configured view transform
and other color management settings on the image. If disable it uses
the standard view transform instead. This feature was originally
suggested in T83842 and is part of the color management improvements
task in T68926. With this feature it is possible to toggle the
application of the color management settings for each input socket
of the File Output node individually.
Reviewed By: brecht
Maniphest Tasks: T68926, T83842
Differential Revision: https://developer.blender.org/D9921
|
|
|
|
This adds a new Align Rotation to Vector node based on the mockup
in T83669.
Reviewers: HooglyBoogly, simonthommes
Differential Revision: https://developer.blender.org/D10081
|
|
This patch implements the same operations and interface as the regular
vector math node, but it runs for every element of the attribute. This
should expand what's possible with geometry nodes quite a bit.
Differential Revision: https://developer.blender.org/D9914
|
|
This commit replaces the two-column list for editing node group inputs
and outputs with a cleaner solution with two panels. The new layout
has several benefits:
- It uses the vertical space in the node editor sidebar better.
- It should be more familiar because of similarity with other UI lists.
- It should look better with consistent alignment and icons.
Note that displaying the "Name" property outside of the list itself is
a bit inconsistent and could possibly be removed in the future.
Differential Revision: https://developer.blender.org/D9683
|
|
Since the introduction in rB4de7c0c3105a, the option is only used in the
compositor, it has no effect elsewhere [texture nodes, shader nodes].
Now only show the option for the compositor.
Maniphest Tasks: T84389
Differential Revision: https://developer.blender.org/D10005
|
|
{D9211} introduced pre-multiplying the color for the keying node. This
pre-multiplication should also be done by other keying nodes and should be
the default operation for alpha node.
This patch will change the logic of keying nodes (Cryptomatte Node,
Channel Matte, Chroma Matte, Color Matte, Difference Matte, Distance
Matte, Luminance Matte) and breaks old files.
The Set alpha node has a mode parameter. This parameter changes
the logic to `Apply Mask` the alpha on the RGBA channels of the input color
or only replace the alpha channel (old behavior).
The replace mode is automatically set for older files. When adding
new files the the multiply mode is set.
Reviewed By: Sergey Sharybin
Differential Revision: https://developer.blender.org/D9630
|
|
This node updates the "rotation" attribute on points.
Multiple ways to specify the rotation are supported.
Differential Revision: https://developer.blender.org/D9883
Ref T83668.
|
|
In some cases the variables were set but never used anywhere.
Differential Revision: https://developer.blender.org/D9889
|
|
The previous design is rather old and has a couple of problems:
* Scalability: The current solution of adding little icon buttons next to the
data-block name field doesn't scale well. It only works if there's a small
number of operations. We need to be able to place more items there for better
data-block management. Especially with the introduction of library overrides.
* Discoverability: It's not obvious what some of the icons do. They appear and
disappear, but it's not obvious why some are available at times and others
not.
* Unclear Status: Currently their library status (linked, indirectly linked,
broken link, library override) isn't really clear.
* Unusual behavior: Some of the icon buttons allow Shift or Ctrl clicking to
invoke alternative behaviors. This is not a usual pattern in Blender.
This patch does the following changes:
* Adds a menu to the right of the name button to access all kinds of operations
(create, delete, unlink, user management, library overrides, etc).
* Make good use of the "disabled hint" for tooltips, to explain why buttons are
disabled. The UI team wants to establish this as a good practise.
* Use superimposed icons for duplicate and unlink, rather than extra buttons
(uses less space, looks less distracting and is a nice + consistent design
language).
* Remove fake user and user count button, they are available from the menu now.
* Support tooltips for superimposed icons (committed mouse hover feedback to
master already).
* Slightly increase size of the name button - it was already a bit small
before, and the move from real buttons to superimposed icons reduces usable
space for the name itself.
* More clearly differentiate between duplicate and creating a new data-block.
The latter is only available in the menu.
* Display library status icon on the left (linked, missing library, overridden,
asset)
* Disables "Make Single User" button - in review we weren't sure if there are
good use-cases for it, so better to see if we can remove it.
Note that I do expect some aspects of this design to change still. I think some
changes are problematic, but others disagreed. I will open a feedback thread on
devtalk to see what others think.
Differential Revision: https://developer.blender.org/D8554
Reviewed by: Bastien Montagne
Design discussed and agreed on with the UI team, also see T79959.
|
|
This uses the "id" attribute to randomly pick instances from a collection
for each point.
There is one issue. When the collection is updated (e.g. when an object is
added to it), the nodes modifier is not automatically updated. It seems
like we don't have the infrastructure to support this dependency yet.
The same issue exists in the Boolean modifier and with collision collections.
This should be solved separately soonish.
When "Whole Collection" is disabled, one direct child of the input collection
is instanced at each point. A direct child can be an object or a collection.
Currently, all objects are picked approximately equally often. In the future,
we will provide more control over which point gets which instance.
Differential Revision: https://developer.blender.org/D9884
Ref T82372.
|
|
Ref: T82651
Normally people use "Combine XYZ" to input a vector, but it is more
interesting to have an explicit vector input.
So this is basically "Combine XYZ" without any input sockets, the values
are stored in the node itself.
Differential Revision: https://developer.blender.org/D9885
|
|
This patch adds two related nodes, a node for separating points
and mesh vertices based on a boolean attribute input, and a node
for creating boolean attributes with comparisons.
See the differential for an example file and video.
Point Separate (T83059)
The output in both geometries is just point data, contained in the mesh
and point cloud components, depending which components had data in the
input geometry. Any points with the mask attribute set to true will be
moved from the first geometry output to the second. This means that
for meshes, all edge and face data will be removed. Any point domain
attributes are moved to the correct output geometry as well.
Attribute Compare (T83057)
The attribute compare does the "Equal" and "Not Equal" operations by
comparing vectors and colors based on their distance from each other.
For other operations, the comparison is between the lengths of the
vector inputs. In general, the highest complexity data type is used
for the operation, and a new function to determine that is added.
Differential Revision: https://developer.blender.org/D9876
|
|
Differential Revision: https://developer.blender.org/D9861
Ref T82585.
|
|
This patch does two things:
* Introduce a Seed to the random distribution method
* Bring in a new distribution method for the point scattering node
Patch Review: https://developer.blender.org/D9787
Note: This commit doesn't not handle doversion. Which means that users
need to manually update their files that were using the Point Distribute
node and reconnect inputs to the "Maximum Density" socket.
Original patch by Sebastian Parborg, with changes to not rely on the cy
libraries and overall cleanup.
Patch review by Jacques Lucke, besides help with the new "heap" system
that was required for this algorithm.
Based on Cem Yuksel. 2015. Sample Elimination for Generating Poisson Disk
Sample. Sets. Computer Graphics Forum 34, 2 (May 2015), 25-32
http://www.cemyuksel.com/research/sampleelimination/
|
|
Previously, the node was called Random Attribute. For consistency reasons,
we move the "Attribute" part of the name to the front.
|
|
The Point Instance node can instance entire collections now.
Before, only individual collections were supported.
Randomly selecting objects from the collection on a per point basis
is not support, yet.
Last part of D9739.
Ref T82372.
|
|
The implementation is pretty much the same as for Object sockets.
The socket color is the one that is used for collections in the outliner.
Part of D9739.
|
|
This node can be used to mix two attributes in various ways.
The blend modes are the same as in the MixRGB shader node.
Differential Revision: https://developer.blender.org/D9737
Ref T82374.
|
|
This commit adds a node that fills every element of an attribute
with the same value. Currently it supports float, vector, and color
attributes. An immediate use case is for "billboard" scattering.
Currently people are using the same input to a Random Attribute node's
min and max input to fill every element of a vector with the same value,
which is an unintuitive way to accomplish the same thing.
Differential Revision: https://developer.blender.org/D9790
|
|
Until there is a icon made specially for this, the nodetree icon is up
for grabs. Using it in the nodegroup + modifier + editor helps the users
to make a connection on where to edit those modifiers.
|
|
This is the initial merge from the geometry-nodes branch.
Nodes:
* Attribute Math
* Boolean
* Edge Split
* Float Compare
* Object Info
* Point Distribute
* Point Instance
* Random Attribute
* Random Float
* Subdivision Surface
* Transform
* Triangulate
It includes the initial evaluation of geometry node groups in the Geometry Nodes modifier.
Notes on the Generic attribute access API
The API adds an indirection for attribute access. That has the following benefits:
* Most code does not have to care about how an attribute is stored internally.
This is mainly necessary, because we have to deal with "legacy" attributes
such as vertex weights and attributes that are embedded into other structs
such as vertex positions.
* When reading from an attribute, we generally don't care what domain the
attribute is stored on. So we want to abstract away the interpolation that
that adapts attributes from one domain to another domain (this is not
actually implemented yet).
Other possible improvements for later iterations include:
* Actually implement interpolation between domains.
* Don't use inheritance for the different attribute types. A single class for read
access and one for write access might be enough, because we know all the ways
in which attributes are stored internally. We don't want more different internal
structures in the future. On the contrary, ideally we can consolidate the different
storage formats in the future to reduce the need for this indirection.
* Remove the need for heap allocations when creating attribute accessors.
It includes commits from:
* Dalai Felinto
* Hans Goudey
* Jacques Lucke
* Léo Depoix
|
