Age | Commit message (Collapse) | Author |
|
|
|
This was missed in 58c650a44c251a41c89375d697efdf07153016e0.
|
|
|
|
|
|
Use cache from 25e307d725d0b924f rather
than creating a new vector on every redraw.
|
|
Several visual tweaks to node links to make them overall fit in
better with the look of the node editor:
- Change the link thickness with the zoom level to a certain degree.
- Remove the fuzziness of the node link and its shadow/outline.
- The link outline color can now be made transparent.
- Add circles at the end of dragged links when connecting to sockets.
- Improve the banding of the color interpolation along the link.
- Adjust the spacing of dashes along straight node links.
Reviewed By: Pablo Vazquez, Hans Goudey
Differential Revision: http://developer.blender.org/D15036
|
|
|
|
|
|
Previously, curves sculpt tools only worked on original data. This was
very limiting, because one could effectively only sculpt the curves when
all procedural effects were turned off. This patch adds support for curves
sculpting while looking the result of procedural effects (like deformation
based on the surface mesh). This functionality is also known as "crazy space"
support in Blender.
For more details see D15407.
Differential Revision: https://developer.blender.org/D15407
|
|
A small regression as a result of adding a custom outline to the empty
virtual socket, which ended up overriding the colors when selected with
Shift+LMB.
Differential Revision: https://developer.blender.org/D15103
|
|
Show the supported geometry types returned by geometry
node socket declarations in the socket inspection tooltip.
Differential Revision: https://developer.blender.org/D14802
|
|
- CustomDataType -> eCustomDataType
- CustomDataMask -> eCustomDataMask
- AttributeDomain -> eAttrDomain
- NamedAttributeUsage -> eNamedAttrUsage
|
|
This commits corrects the calculation of the Frame Node label size,
making it independent of the 'Line Width' user preference.
Since `U.dpi` is actually DPI divided by `U.pixelsize` and `U.pixelsize`
is calculated from line-width multiplying by `U.pixelsize` undoes
the connection between line-width and label size.
It now stays the same, regardless of the line-width setting.
Reviewed By: Julian Eisel, Harley Acheson
Differential Revision: https://developer.blender.org/D14338
|
|
This is a follow up to rBbb0fc675822f313c5546a2498a162472c2571ecb.
Now the same kind of run-time data is added to nodes and sockets.
Differential Revision: https://developer.blender.org/D15060
|
|
Replace tot/amount & size with num, in keeping with T85728.
|
|
|
|
After rB47276b847017, for certain socket types such as object or
material, the name of the item is not obtained correctly leading
the tooltip to display random non-character memory values as text.
Differential Revision: https://developer.blender.org/D14762
|
|
|
|
* Adjust width based on node width, necessary to make the longer name below work.
* Show "X Named Attributes" in the overlay.
* Use "Accessed named attributes" in the tooltip.
Differential Revision: https://developer.blender.org/D14751
|
|
|
|
|
|
|
|
This adds a new node editor overlay that helps users to see where
named attributes are used. This is important, because named
attributes can have name collisions between independent node
groups which can lead to hard to find issues.
Differential Revision: https://developer.blender.org/D14618
|
|
Currently, hovering over a socket itself shows no tooltip at all, while
hovering over its value field shows "Default value", which is not helpful.
This patch therefore implements socket tooltips following the proposal at
https://blender.community/c/rightclickselect/2Qgbbc/.
A lot of the basic functionality was already implemented for Geometry Nodes,
where hovering over the socket itself shows introspection info.
This patch extends this by:
- Supporting dynamic tooltips on labels, which is important for good tooltip
coverage in a socket's region of the node.
- Adding a function to setting a dynamic tooltip for an entire uiLayout, which
avoids needing to set it manually for a wide variety of socket types.
- Hiding the property label field in a tooltip when dynamic tooltip is also
provided. If really needed, this label can be restored through the dynamic
tooltip, but in all current cases the label is actually pointless anyways
since the dynamic tooltip gives more accurate and specific information.
- Adding dynamic tooltips to a socket's UI layout row if it has a description
configured, both in the Node Editor as well as in the Material Properties.
Note that the patch does not add any actual tooltip content yet, just the
infrastructure to show them. By default, sockets without a description still
show the old "Default value" tooltip.
For an example of how to add socket descriptions, check the Cylinder node
in the Geometry Nodes.
Differential Revision: https://developer.blender.org/D9967
|
|
Also add space below file references.
|
|
|
|
This commit moves declarations that depend on `FN_field.hh` out of
`BKE_geometry_set.hh` into `BKE_geometry_fields.hh`. This helps to
reduce the number of areas that need to depend on the functions module,
which recently came in in review of D11591.
In the future we may have a library of standard field inputs in order to
make composing algorithms easier, so it makes sense to have a header
that could contain them and some basic related utilities relating the
concepts of geometry and fields.
Reducing use of unnecessary headers may also reduce compilation time.
Differential Revision: https://developer.blender.org/D14517
|
|
Fix small cosmetic issues with the reroute node:
1. Remove special case that allowed curved links to attach vertically.
2. Center align the reroute node's label.
The vertically attached node links could lead to kinks in the otherwise
smooth curves. This would break the visual flow and make the link
potentially intersect the node's label.
The center alignment of the label gives more consistent results for
different label lengths and also reduces the chance of the label
interfering with the node links.
Reviewed By: Hans Goudey, Pablo Vazquez
Differential Revision: D14457
|
|
This is a follow up to rB2252bc6a5527cd7360d1ccfe7a2d1bc640a8dfa6.
|
|
For more detail about `CPPType`, see `BLI_cpp_type.hh` and D14367.
Differential Revision: https://developer.blender.org/D14367
|
|
This commit removes the implementations of legacy nodes,
their type definitions, and related code that becomes unused.
Now that we have two releases that included the legacy nodes,
there is not much reason to include them still. Removing the
code means refactoring will be easier, and old code doesn't
have to be tested and maintained.
After this commit, the legacy nodes will be undefined in the UI,
so 3.0 or 3.1 should be used to convert files to the fields system.
The net change is 12184 lines removed!
The tooltip for legacy nodes mentioned that we would remove
them before 4.0, which was purposefully a bit vague to allow
us this flexibility. In a poll in a devtalk post showed that the
majority of people were okay with removing the nodes.
https://devtalk.blender.org/t/geometry-nodes-backward-compatibility-poll/20199
Differential Revision: https://developer.blender.org/D14353
|
|
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3dbec we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
|
|
Activating a gizmo used the windows eventstate which may have values
newer than the event used to activate the gizmo.
This meant transforms check for the key that activated transform
could be incorrect.
Support passing an event when calling operators to avoid this problem.
|
|
|
|
Small fixes to the drawing of multi input sockets:
- Make the outline thickness consistent with normal node sockets,
independent from the screen DPI.
- Only highlight multi input sockets when they are actually selected.
- Skip selected multi inputs when drawing normal selected sockets.
Differential Revision: https://developer.blender.org/D14192
|
|
This commit improves the drawing of selected node links:
- Highlight the entire link to make it easier to spot where the link
is going/coming from.
- Always draw selected links on top, so they are always clearly
visible.
- Don't fade selected node links when the sockets they are connected
to are out out view.
- Dragged node links still get a partial highlight when they are only
attached to one socket.
Differential Revision: https://developer.blender.org/D11930
|
|
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
|
|
Previously, node selection made no distinction between a frame node and
other nodes. So a frame node would be selected by their whole rect or
center (depending on box/lasso/circle select). As a consequence of this,
box and lasso could not pratically be started inside a frame node (with
the intention to select a subset of contained child nodes) because the
frame would be selected immediately and tweak-transforming started.
Circle selecting would always contain the frame node as well (making
transforming a subset of nodes without also transforming the whole frame
impossible).
Now change selection behavior so that for all selection modes only the
border [the margin area that is automatically added around all nodes,
see note below] of a frame node is considered in selection. This makes
for a much more intuitive experience when arranging nodes inside frames.
note: to make the area of interest for selection/moving more obvious,
the cursor changes when hovering over (as is done for resizing).
note: this also makes the resize margin consistent with other nodes.
note: this also fixes right resize border (was exclusive instead of
inclusive as every other border)
Also fixes T46540.
|
|
This Diff changes the computation of the input and output socket
position to being always aligned with its corresponding label.
Reviewed By: campbellbarton
Ref D14025
|
|
This patch makes it possible to set the UI color of a node's
header bar and override the default from the node's typeinfo.
Currently the color is taken from the `.nclass`
member of the node's bNodeType->TypeInfo struct.
This is created once when registering the node.
The TypeInfo is used for both UI and non-UI functionality.
Since the TypeInfo is shared, the header bar for the node
can't be changed without changing all nodes of that type.
The Map Range node is shown as a `Converter` or blue color by default.
This patch allows this to be changed dynamically to `Vector` or purple.
This is done by adding a `ui_class` callback to node typeinfo struct.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D13936
|
|
Correct corner radius of the node outline to prevent a noticeable gap in
some cases.
---
Currently we make a small mistake in the creation of the node outline:
We offset the rectangle describing the outline by the outline thickness,
but we don't adjust the corner radius accordingly.
Therefore the rounded corner of the outline and the node body are not
concentric which can sometimes lead to a visible gap at the corner.
How noticeable it is depends on the theme, the screen's dpi and the
line thickness set in the preferences.
Simply adjusting the corner radius for the outline to also be increased
by the outline thickness fixes this small issue.
| display, line thickness | **patch** | **master** |
| --- | --- | --- |
| 1080p, default/thin | {F12835304} | {F12835305} |
| retina, thin | {F12835306} | {F12835307} |
The issue was mentioned by @hitrpr
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D13955
|
|
This commit moves code in all node editor files to the
`blender::ed::space_node` namespace, except for C API
functions defined in `ED_node.h`, which can only be moved
once all areas calling them are moved to C++.
The change is fairly straightforward, I just moved a couple
of "ED_" code blocks around to make the namespace more
contiguous, and there's the method for adding a pointer to
a struct in a C++ namespace in DNA.
Differential Revision: https://developer.blender.org/D13871
|
|
|
|
These operations (sorting and selecting all nodes) should generally
be handled by the node editor and not outside code. They were not
called outside of the node editor, so they can be moved to the editor's
`intern` header.
|
|
Followup to the previous commit. Jeroen and I agreed the old naming was
confusing.
|
|
Includes unwanted changes
This reverts commit 46e049d0ce2bce2f53ddc41a0dbbea2969d00a5d.
|
|
This patch implements the vector types (i.e:`float2`) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the `blender::math` namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
####Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others
we currently don't have (uintX, intX). All these variations were
asking for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector
functions should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the `BLI_(float|double|mpq)(2|3|4).hh` is a
bit of a let down. Most clases are incomplete, out of sync with each
others with different codestyles, and some functions that should be
static are not (i.e: `float3::reflect()`).
####Upsides:
- Still support `.x, .y, .z, .w` for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types
and can be restricted to certain types. Also template specialization
let us define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance
is the same.
####Downsides:
- Might impact debugability. Though I would arge that the bugs are
rarelly caused by the vector class itself (since the operations are
quite trivial) but by the type conversions.
- Might impact compile time. I did not saw a significant impact since
the usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length.
For instance, one can't call `len_squared_v3v3` in
`math::length_squared()` and call it a day.
- Type cast does not work with the template version of the `math::`
vector functions. Meaning you need to manually cast `float *` and
`(float *)[3]` to `float3` for the function calls.
i.e: `math::distance_squared(float3(nearest.co), positions[i]);`
- Some parts might loose in readability:
`float3::dot(v1.normalized(), v2.normalized())`
becoming
`math::dot(math::normalize(v1), math::normalize(v2))`
But I propose, when appropriate, to use
`using namespace blender::math;` on function local or file scope to
increase readability.
`dot(normalize(v1), normalize(v2))`
####Consideration:
- Include back `.length()` method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement. It felt
like too much for what we need and would be difficult to extend / modify
to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches `delaunay_2d.cc` and the intersection code. I would like
to know @howardt opinion on the matter.
- The `noexcept` on the copy constructor of `mpq(2|3)` is being removed.
But according to @JacquesLucke it is not a real problem for now.
I would like to give a huge thanks to @JacquesLucke who helped during this
and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: https://developer.blender.org/D13791
|
|
Reverted because the commit removes a lot of commits.
This reverts commit a2c1c368af48644fa8995ecbe7138cc0d7900c30.
|