| Age | Commit message (Collapse) | Author |
|---|
|
|
|
* Adjust width based on node width, necessary to make the longer name below work.
* Show "X Named Attributes" in the overlay.
* Use "Accessed named attributes" in the tooltip.
Differential Revision: https://developer.blender.org/D14751
|
|
|
|
|
|
- Add missing doxy-section for Apply Parent Inverse Operator
- Use identity for None comparison in Python.
- Remove newline from operator doc-strings.
- Use '*' prefix multi-line C comment blocks.
- Separate filenames from doc-strings.
- Remove break after return.
|
|
This was possible with the gizmo, but no using the operator (e.g. from
the sidebar).
Now store original offsets and reset to these on calcel (ESC or RMB).
Maniphest Tasks: T97465
Differential Revision: https://developer.blender.org/D14704
|
|
The "PROP" in the name reflects its generic status, and removing
"LOOP" makes sense because it is no longer associated with just
mesh face corners. In general the goal is to remove extra semantic
meaning from the custom data types.
|
|
Preserve multi socket link order when copying nodes or adding a new
group input sockets by linking directly to multi inputs from the group
input node's extension socket.
This is done by also copying the `multi_input_socket_index` when
the new links are created by copying existing or temporary links.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D14535
|
|
|
|
This adds a new node editor overlay that helps users to see where
named attributes are used. This is important, because named
attributes can have name collisions between independent node
groups which can lead to hard to find issues.
Differential Revision: https://developer.blender.org/D14618
|
|
Currently, hovering over a socket itself shows no tooltip at all, while
hovering over its value field shows "Default value", which is not helpful.
This patch therefore implements socket tooltips following the proposal at
https://blender.community/c/rightclickselect/2Qgbbc/.
A lot of the basic functionality was already implemented for Geometry Nodes,
where hovering over the socket itself shows introspection info.
This patch extends this by:
- Supporting dynamic tooltips on labels, which is important for good tooltip
coverage in a socket's region of the node.
- Adding a function to setting a dynamic tooltip for an entire uiLayout, which
avoids needing to set it manually for a wide variety of socket types.
- Hiding the property label field in a tooltip when dynamic tooltip is also
provided. If really needed, this label can be restored through the dynamic
tooltip, but in all current cases the label is actually pointless anyways
since the dynamic tooltip gives more accurate and specific information.
- Adding dynamic tooltips to a socket's UI layout row if it has a description
configured, both in the Node Editor as well as in the Material Properties.
Note that the patch does not add any actual tooltip content yet, just the
infrastructure to show them. By default, sockets without a description still
show the old "Default value" tooltip.
For an example of how to add socket descriptions, check the Cylinder node
in the Geometry Nodes.
Differential Revision: https://developer.blender.org/D9967
|
|
Calling duplicate operation without selecting anything registers an undo
step. If nothing is selected (keyframe, curve, object, etc.), cancel the
operator execution to prevent undo push.
Patch improves following operators:
- ACTION_OT_duplicate
- GPENCIL_OT_duplicate
- GRAPH_OT_duplicate
- MESH_OT_duplicate
- NODE_OT_duplicate
- OBJECT_OT_duplicate
Reviewed By: campbellbarton
Ref D14511
|
|
Also add space below file references.
|
|
|
|
This commit moves declarations that depend on `FN_field.hh` out of
`BKE_geometry_set.hh` into `BKE_geometry_fields.hh`. This helps to
reduce the number of areas that need to depend on the functions module,
which recently came in in review of D11591.
In the future we may have a library of standard field inputs in order to
make composing algorithms easier, so it makes sense to have a header
that could contain them and some basic related utilities relating the
concepts of geometry and fields.
Reducing use of unnecessary headers may also reduce compilation time.
Differential Revision: https://developer.blender.org/D14517
|
|
This commit adds attribute search the the attribute input field node.
Because it's a field node, finding which attribute to display without
increasing the complexity a lot isn't obvious. In this commit, all
attributes used by nodes in the current group are included.
When an attribute is chosen from the list, the node's data type is
updated, and links connected to the output socket are reconnected.
Ref T96271
Differential Revision: https://developer.blender.org/D14516
|
|
|
|
|
|
It's better to use some local/stable identifiier to avoid relying on
the data not being freed in between creating the search menu and
the exec function. This is similar to c473b2ce8bdbf8fa.
|
|
Add a check to the creation of node groups to remove hidden links
that are connected to the outside of the node group. This avoids
creating sockets in the group's interface that aren't (visibly)
connected to anything within the node group.
Reviewed By: Jacques Lucke, Hans Goudey
Differential Revision: https://developer.blender.org/D14249
|
|
There were multiple issues at hand here:
- The default value has been changed to `{0, 0, 1}` see: rB25f1783673de636a6f0ca4457df8c05bc685981a
- The output needs the subtype set `PROP_DIRECTION`
- The noder properties were missing in `node_composit_set_butfunc`
Fixes T96860
|
|
Fix small cosmetic issues with the reroute node:
1. Remove special case that allowed curved links to attach vertically.
2. Center align the reroute node's label.
The vertically attached node links could lead to kinks in the otherwise
smooth curves. This would break the visual flow and make the link
potentially intersect the node's label.
The center alignment of the label gives more consistent results for
different label lengths and also reduces the chance of the label
interfering with the node links.
Reviewed By: Hans Goudey, Pablo Vazquez
Differential Revision: D14457
|
|
Make a copy of ImageFormatData that contains the effective color management
settings, and pass that along to the various functions. This will make it
possible to add more complex logic later.
For compositing nodes, passing along view and display settings through
many functions made it harder to add additional settings, so just get those
from the scene now.
Differential Revision: https://developer.blender.org/D14401
|
|
This is a follow up to rB2252bc6a5527cd7360d1ccfe7a2d1bc640a8dfa6.
|
|
This reverts commit 33409f9f1cd42e899f2706fe7878e5e89b50d617, as it breaks
panning in the image editor.
Fixes T96543
|
|
For more detail about `CPPType`, see `BLI_cpp_type.hh` and D14367.
Differential Revision: https://developer.blender.org/D14367
|
|
Resizing nodes used the cursor location when the event was triggered
instead of the drag-start, harmless but means the drag location isn't
under the cursor especially with a high drag threshold.
Noticed when investigating other drag issues,
unrelated to recent changes to drag behavior.
|
|
This is only part of the experimental "Full Frame" mode (disabled
by default). See T88150.
Currently the viewer node uses buffer paddings to display image offset
in the backdrop as a temporal solution implemented for {D12466}.
This solution is inefficient memory and performance-wise. Another
issue is that the paddings are part the image when saved.
This patch instead sets the offset in the Viewer node image
as variables and makes the backdrop take it into account
when drawing the image or any related gizmo.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D12750
|
|
This commit removes the implementations of legacy nodes,
their type definitions, and related code that becomes unused.
Now that we have two releases that included the legacy nodes,
there is not much reason to include them still. Removing the
code means refactoring will be easier, and old code doesn't
have to be tested and maintained.
After this commit, the legacy nodes will be undefined in the UI,
so 3.0 or 3.1 should be used to convert files to the fields system.
The net change is 12184 lines removed!
The tooltip for legacy nodes mentioned that we would remove
them before 4.0, which was purposefully a bit vague to allow
us this flexibility. In a poll in a devtalk post showed that the
majority of people were okay with removing the nodes.
https://devtalk.blender.org/t/geometry-nodes-backward-compatibility-poll/20199
Differential Revision: https://developer.blender.org/D14353
|
|
The previous code updated the wrong node tree. The result was that
the new group node did not have the socket that was supposed to
be linked.
|
|
|
|
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3dbec we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
|
|
Activating a gizmo used the windows eventstate which may have values
newer than the event used to activate the gizmo.
This meant transforms check for the key that activated transform
could be incorrect.
Support passing an event when calling operators to avoid this problem.
|
|
|
|
This avoids transform jumping which is a problem when tweaking values a
small amount. A fix for T40549 was made box-select used the location
when the key was pressed.
While it's important for box-select or any operator where it's expected
the drag-start location is used, this is only needed in some cases.
Since the event stores the click location and the current location,
no longer overwrite the events real location. Operators that depend on
using the drag-start can use this location if they need.
In some cases the region relative cursor location (Event.mval) now needs
to be calculated based on the click location.
- Added `WM_event_drag_start_mval` for convenient access to the region
relative drag-start location (for drag events).
- Added `WM_event_drag_start_xy` for window relative coordinates.
- Added Python property Event.mouse_prev_click_x/y
Resolves T93599.
Reviewed By: Severin
Ref D14213
|
|
Enables image user nodes to display the file alpha mode, similar to the
colorspace setting.
Also removes image_has_alpha in favor of using BKE_image_has_alpha, because it
did not check if the image actually had an alpha channel, just if the file format
was capable of supporting an alpha channel.
Differential Revision: https://developer.blender.org/D14153
|
|
Small fixes to the drawing of multi input sockets:
- Make the outline thickness consistent with normal node sockets,
independent from the screen DPI.
- Only highlight multi input sockets when they are actually selected.
- Skip selected multi inputs when drawing normal selected sockets.
Differential Revision: https://developer.blender.org/D14192
|
|
This commit improves the drawing of selected node links:
- Highlight the entire link to make it easier to spot where the link
is going/coming from.
- Always draw selected links on top, so they are always clearly
visible.
- Don't fade selected node links when the sockets they are connected
to are out out view.
- Dragged node links still get a partial highlight when they are only
attached to one socket.
Differential Revision: https://developer.blender.org/D11930
|
|
|
|
This was an oversight in rB06ac5992618a75c453e495e06af7c5faf30499a7.
|
|
|
|
This patch aims to fix the issues presented in T87829 and T95331,
namely precision issues while connecting two nodes when being too
close together in the node editor editors, in a few cases even
resulting in the complete inability to connect nodes.
Sockets are found by intersecting a padded rect around the cursor
with the nodes' sockets' location. That creates ambiguities, as it's
possible for the padded rect to intersect with the wrong node,
as the distance between two nodes is smaller than the rect is padded.
The fix in this patch is checking against an unpadded rectangle in
visible_node().
Differential Revision: https://developer.blender.org/D14122
|
|
This commit renames enums related the "Curve" object type and ID type
to add `_LEGACY` to the end. The idea is to make our aspirations clearer
in the code and to avoid ambiguities between `CURVE` and `CURVES`.
Ref T95355
To summarize for the record, the plans are:
- In the short/medium term, replace the `Curve` object data type with
`Curves`
- In the longer term (no immediate plans), use a proper data block for
3D text and surfaces.
Differential Revision: https://developer.blender.org/D14114
|
|
This patch reverses the dependency between `BLI_math_vec_types.hh` and
`BLI_math_vector.hh`. Now the higher level `blender::math` functions
depend on the header that defines the types they work with, rather than
the other way around.
The initial goal was to allow defining an `enable_if` in the types header
and using it in the math header. But I also think this operations to types
dependency is more natural anyway.
This required changing the includes some files used from the type
header to the math implementation header. I took that change a bit
further removing the C vector math header from the C++ header;
I think that helps to make the transition between the two systems
clearer.
Differential Revision: https://developer.blender.org/D14112
|
|
Use using instead of typedef, remove redundant string init,
use "empty", address qualified auto, use nullptr.
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
|
|
|
|
|
|
|
