| Age | Commit message (Collapse) | Author |
|---|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
Starts scrolling when dragging a node or node link and going outside the current window.
Largely copied from the VIEW2D_OT_edge_pan operator.
Edge panning operator customdata and supporting functions now in
UI_view2d.h, so they could be used by operators in other editor
libraries. The VIEW2D_OT_edge_pan operator also uses this customdata and
shared functions now. Operators properties can be used to configure
edge panning margins and speed for each use case, rather than using
hardcoded values.
The speed function for edge panning has been tweaked somewhat:
* "Speed per pixel" has been replaced with a "speed ramp" distance.
This is more intuitive and also creates an upper bound for the speed,
which can otherwise become extreme with large cursor distance.
* "Max speed" is reached at the end of the speed ramp.
* Padding the region inside and outside is applied as before, but both
values are operator properties now.
Node transform operator also supports edge panning. This requires
an offset for changes in the view2d rect, otherwise nodes are "stuck"
to the original view.
Transform operator had cursor wrapping categorically enabled, but this
gets quite confusing with the edge scrolling mechanism. A new TransInfo
option T_NO_CURSOR_WRAP has been introduced to disable this behavior.
The double negative is a bit annoying, but want to avoid affecting the
existing transform modes, so by default it should still set the
OP_IS_MODAL_GRAB_CURSOR flag (which then sets the WM_CURSOR_WRAP_XY
flag during modal execution).
Reviewed By: HooglyBoogly, JacquesLucke
Differential Revision: https://developer.blender.org/D11073
|
|
|
|
|
|
The tooltip while dragging a collection in Scene mode in the Outliner
was always "Link inside Collection" even if the action performed was
different. This was because the `collection_drop_init` set the
`from_collection` always to `NULL` if the Outliner display mode was
currently set to Scene.
Commit that introduced this issue:
rB0f54c3a9b75be8f8db9022fb0aeb0f8d0d4f0299
The fix removes the check of the display mode and only sets the
`from_collection` to `NULL` if the ctrl (linking) key is held.
Reviewed By: JacquesLucke
Maniphest Tasks: T86947
Differential Revision: https://developer.blender.org/D10864
|
|
|
|
When adding a notifier, `reference` data can be passed. The notifier system
uses this to filter out listeners, for example if data of a scene changes,
windows showing a different scene won't get the notifiers sent to their
listeners.
For the `NC_SPACE` notifiers, a number of places also passed the space as
`reference`, but that wasn't used at all. The notifier would still be sent to
all listeners in all windows (and the listeners didn't use it either). Causing
some unnecessary updates (e.g. see ed2c4825d3e2344).
With this commit, passing a space will make sure the notifier is only sent to
that exact space. Some code seems to already have expected that to be the case.
However there were some cases that passed the space as `reference` without
reason, which would break with this commit (meaning they wouldn't redraw or
update correctly).
Corrected these so they don't pass the space anymore.
|
|
Code to check if the Outliner tree-element type was the general ID one
would always check against "0" (explicity or even implicitly). For
somebody unfamiliar with the code this is very confusing. Instead the
value should be given a name, e.g. through an enum.
Adds `TSE_SOME_ID` as the "default" ID tree-element type. Other types
may still represent IDs, as I explained in a comment at the definition.
There may also still be cases where the type is checked against "0". I
noted in the comment that such cases should be cleaned up if found.
|
|
"Shift to parent" does not make any sense for collections since they
don't have parenting like objects. This commit just adds a simple check
for whether the first drag ID is an object before displaying
that part of the message.
Differential Revision: https://developer.blender.org/D10203
|
|
|
|
When dropping an asset somewhere, it is appended and then a drop operation is
called to actually add it to the scene based on current context. If this drop
operation fails, the appended data-block is now still in the .blend. The user
may not notice and not expect this.
Instead idea is to rollback any changes done by dropping code if the operation
fails, namely removing the appended data-block again.
Adds a new `cancel()` callback which is called if the drop operator returns
`OPERATOR_CANCELLED` to drop-boxes and a generic function to deal with assets
on drop failure.
Also removes the `free_id_on_error` property of the `NODE_OT_add_group`
operator, which was used as ad-hoc solution to get this same behavior.
|
|
|
|
Filtering may make the Outliner tree empty. The function to find the drop
element should just return null then and let the caller decide how to deal with
it.
|
|
Having a centeral place to find a list of all library overrides should be
useful for managing production scenes where library overrides are used a lot.
This change adds the individually overridden properties of a data-block under
the data-block itself. Just how we show modifiers, constraints or pose channels
there. This way we can also expose library override operations/options better
in future.
There's also a filter option for the library overrides now, so they can be
hidden. It is only available in the View Layer display mode though, like the
other filter options.
One internal change this has to do is adding more informative return values to
undo pushes and the library override functions called by it. That way we can
send a notifier when library overrides change for the Outliner to know when to
rebuild the tree.
Differential Revision: https://developer.blender.org/D7631
Reviewed by: Andy Goralczyk, Bastien Montagne, William Reynish
|
|
For the Asset Browser, it needs to be possible to drag assets into various
editors, which may not come from the current .blend file. In other words, the
dragging needs to work with just the asset metadata, without direct access to
the data-block itself.
Idea is simple: When dragging an asset, store the source file-path and
data-block name and when dropping, append the data-block. It uses existing drop
operators, but the function to get the dropped data-block is replaced with one
that returns the local data-block, or, in case of an external asset, appends
the data-block first.
The drop operators need to be adjusted to use this new function that respects
assets. With this patch it only works for dragging assets into the 3D view.
Note that I expect this to be a short-lived change. A refactor like D4071 is
needed to make the drag & drop system more future proof for assets and other
use cases.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9721
Reviewed by: Bastien Montagne, Brecht Van Lommel
|
|
Using 'is/means/equal' words in place of equal sign in descriptions.
Differential Revision: https://developer.blender.org/D9799
Reviewed by Hans Goudey
|
|
The icons for collapsed children already draw highlighted when hovered.
Because the item icons are now select targets (for outliner to properties
editor tab switching) this adds highlights on hover for all outliner
element icons.
|
|
Caused by rBb077de086e14.
Not entirely sure why this was rebuilding the tree prior to above
commit, but sending an ND_OB_SHADING notifier is appropriate (and also
what the Outliners listener listens to).
Maniphest Tasks: T82251
Differential Revision: https://developer.blender.org/D9396
|
|
Blender crashed when dragging and dropping color into the outliner.
This issue was cause by a missing check for the correct drag type
in `datastack_drop_poll`. The check is added in this commit.
Additionally, a new drag type is introduced for the "data stack"
drag option, that was introduced in commit 1572da858df4, to
differentiate it from the existing WM_DRAG_ID type.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D9169
|
|
|
|
Build modifiers linked or copied to objects from the outliner would not
animate until the file was saved and reopened due to a missing depsgraph
relations tag.
|
|
This adds an operator to allow drag and drop of modifiers, constraints,
and shader effects within the outliner. Referred to as "data stack" in
the code for simplicity.
The following operations are allowed:
* Reordering within an object or bone
* Copying a single modifier/constraint/effect to another object or bone
* Copying (linking) all modifiers/constraints/effects to another object
or bone.
This complements the recent work done for panel-based modifier layouts
by allowing reordering in the outliner. It also makes it simple to copy
a single modifier/constraint/effect to another object.
Differential Revision: https://developer.blender.org/D8642
|
|
Add a column of icons in the left gutter of the outliner for controlling
the interaction modes of objects. When an object is in a mode other than
object mode, the mode icon will draw to the left of that object. Any
other objects that are valid to be added or swapped into the mode are
drawn with a dot to the left of the object.
Clicking the dot to the left of an object will swap that object with the
current active object in the interaction mode. For edit and pose modes,
ctrl clicking the dot will add that object to the current mode.
Clicking the mode icon next to the active object removes it and all
other objects from the current mode.
The behavior is nearly identical to the previous edit/pose mode toggling
by selecting the mesh and armature datablocks, with additional support
for all interaction modes.
Currently two undo steps are pushed to prevent an assert.
Part of T77408
Manifest Task: https://developer.blender.org/T68498
Differential Revision: https://developer.blender.org/D8641
|
|
No functional changes. Rename soops, soutliner, and so to
space_outliner.
|
|
Currently if you drag and drop an item from the outliner elsewhere in
the Blender window, the outliner will scroll the entire time, even if the
mouse is far away. This commit adds optional behavior for the edge pan
operator that makes it only act if the mouse is close enough to the region.
Differential Revision: https://developer.blender.org/D8193
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/space_outliner` module.
No functional changes.
|
|
Pan the view when dragging elements near the borders. This uses the same
operator that scrolls the region during modifiers drag and drop.
|
|
Right now:
- drag-drop in the Outliner prevents dropping inside linked collections
- drag-drop in the Outliner allows dropping inside overridden
collections (should not be the case)
- `Object Properties` > `Collections` panel allows to add to overridden
collection (should not be the case)
- `Object Properties` > `Collections` panel filters out non-local
collections (so adding to linked collections is forbidden)
- `bpy collection.objects.link()` allows to add to linked collections
(should not be the case)
- `bpy collection.objects.link()` allows to add to overridden
collections (should not be the case)
While this might be supported in the future for overriden collections,
these cases should not be allowed atm. since objects get lost on file
reload.
Note: for the case of the `Object Properties` > `Collections` panel,
this could be improved further to filter out overridden collections as
well.
Reviewers: mont29, brecht
Subscribers:
|
|
A few outliner operators that modify selection were not tagging for a
selection sync which led to selection inconsistencies. This adds syncing
for the following operators:
* Duplicating and deleting collections
* Selecting/deselecting collection contents
* Drag and drop
* Object select, deselect, delete, and delete hierarchy
|
|
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
|
|
Also pass some args as 'const'.
|
|
Parenting in the outliner via drang and drop would always happen without
the 'Keep Transforms' option. Since this is often desired, this adds the
ability to hold Alt for doing this to the drop action.
Adding the hint to hold Alt to the operator name is not nice, but since
the operator name is used for the UI, there doesnt seem to be a nicer
way of doing this.
If modifier keys are needed back for other actions, spawning a menu
instead could be an alternative for the future.
Maniphest Tasks: T74649
Differential Revision: https://developer.blender.org/D7120
|
|
Searching back in the outliner did not require the unused SpaceOutliner
parameter.
|
|
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
|
|
Note that `BKE_library.h`/`library.c` were renamed to
`BKE_lib_id.h`/`lib_id.c` to avoid having a too generic name here.
Part of T72604.
|
|
Old Name New Name
========= =========
init_def_material BKE_materials_init
BKE_material_gpencil_default_free BKE_materials_exit
test_object_materials BKE_object_materials_test
test_all_objects_materials BKE_objects_materials_test_all
give_matarar BKE_object_material_array
give_totcolp BKE_object_material_num
give_current_material_p BKE_object_material_get_p
give_current_material BKE_object_material_get
assign_material BKE_object_material_assign
assign_matarar BKE_object_material_array_assign
give_matarar_id BKE_id_material_array
give_totcolp_id BKE_id_material_num
assign_material_id BKE_id_material_assign
clear_matcopybuf BKE_material_copybuf_clear
free_matcopybuf BKE_material_copybuf_free
copy_matcopybuf BKE_material_copybuf_copy
paste_matcopybuf BKE_material_copybuf_paste
BKE_material_init_gpencil_settings BKE_gpencil_material_attr_init
BKE_material_add_gpencil BKE_gpencil_material_add
BKE_material_gpencil_get BKE_gpencil_material
BKE_material_gpencil_default_get BKE_gpencil_material_default
BKE_material_gpencil_settings_get BKE_gpencil_material_settings
|
|
|
|
In its current version that was a totally useless extra layer of crap
that we can totally avoid. Plus name was bad too.
|
|
|
|
Set and clear parents for all elements in the selection in the outliner.
This also removes the popup menu for setting the parent to curves,
armatures, and lattices. It makes more sense to keep the outliner
simple and only do object parenting.
|
|
`IFACE_` is for short strings always shown in UI (like labels of buttons,
menu entries...). Every thing else, especially when more than a couple
of words, must use `TIP_`.
|
|
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
The grease pencil materials only can be assigned to objects of grease pencil type.
|
|
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
|
|
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
