| Age | Commit message (Collapse) | Author |
|---|
|
Add a column of icons in the left gutter of the outliner for controlling
the interaction modes of objects. When an object is in a mode other than
object mode, the mode icon will draw to the left of that object. Any
other objects that are valid to be added or swapped into the mode are
drawn with a dot to the left of the object.
Clicking the dot to the left of an object will swap that object with the
current active object in the interaction mode. For edit and pose modes,
ctrl clicking the dot will add that object to the current mode.
Clicking the mode icon next to the active object removes it and all
other objects from the current mode.
The behavior is nearly identical to the previous edit/pose mode toggling
by selecting the mesh and armature datablocks, with additional support
for all interaction modes.
Currently two undo steps are pushed to prevent an assert.
Part of T77408
Manifest Task: https://developer.blender.org/T68498
Differential Revision: https://developer.blender.org/D8641
|
|
No functional changes. Rename soops, soutliner, and so to
space_outliner.
|
|
Currently if you drag and drop an item from the outliner elsewhere in
the Blender window, the outliner will scroll the entire time, even if the
mouse is far away. This commit adds optional behavior for the edge pan
operator that makes it only act if the mouse is close enough to the region.
Differential Revision: https://developer.blender.org/D8193
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/space_outliner` module.
No functional changes.
|
|
Pan the view when dragging elements near the borders. This uses the same
operator that scrolls the region during modifiers drag and drop.
|
|
Right now:
- drag-drop in the Outliner prevents dropping inside linked collections
- drag-drop in the Outliner allows dropping inside overridden
collections (should not be the case)
- `Object Properties` > `Collections` panel allows to add to overridden
collection (should not be the case)
- `Object Properties` > `Collections` panel filters out non-local
collections (so adding to linked collections is forbidden)
- `bpy collection.objects.link()` allows to add to linked collections
(should not be the case)
- `bpy collection.objects.link()` allows to add to overridden
collections (should not be the case)
While this might be supported in the future for overriden collections,
these cases should not be allowed atm. since objects get lost on file
reload.
Note: for the case of the `Object Properties` > `Collections` panel,
this could be improved further to filter out overridden collections as
well.
Reviewers: mont29, brecht
Subscribers:
|
|
A few outliner operators that modify selection were not tagging for a
selection sync which led to selection inconsistencies. This adds syncing
for the following operators:
* Duplicating and deleting collections
* Selecting/deselecting collection contents
* Drag and drop
* Object select, deselect, delete, and delete hierarchy
|
|
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
|
|
Also pass some args as 'const'.
|
|
Parenting in the outliner via drang and drop would always happen without
the 'Keep Transforms' option. Since this is often desired, this adds the
ability to hold Alt for doing this to the drop action.
Adding the hint to hold Alt to the operator name is not nice, but since
the operator name is used for the UI, there doesnt seem to be a nicer
way of doing this.
If modifier keys are needed back for other actions, spawning a menu
instead could be an alternative for the future.
Maniphest Tasks: T74649
Differential Revision: https://developer.blender.org/D7120
|
|
Searching back in the outliner did not require the unused SpaceOutliner
parameter.
|
|
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
|
|
Note that `BKE_library.h`/`library.c` were renamed to
`BKE_lib_id.h`/`lib_id.c` to avoid having a too generic name here.
Part of T72604.
|
|
Old Name New Name
========= =========
init_def_material BKE_materials_init
BKE_material_gpencil_default_free BKE_materials_exit
test_object_materials BKE_object_materials_test
test_all_objects_materials BKE_objects_materials_test_all
give_matarar BKE_object_material_array
give_totcolp BKE_object_material_num
give_current_material_p BKE_object_material_get_p
give_current_material BKE_object_material_get
assign_material BKE_object_material_assign
assign_matarar BKE_object_material_array_assign
give_matarar_id BKE_id_material_array
give_totcolp_id BKE_id_material_num
assign_material_id BKE_id_material_assign
clear_matcopybuf BKE_material_copybuf_clear
free_matcopybuf BKE_material_copybuf_free
copy_matcopybuf BKE_material_copybuf_copy
paste_matcopybuf BKE_material_copybuf_paste
BKE_material_init_gpencil_settings BKE_gpencil_material_attr_init
BKE_material_add_gpencil BKE_gpencil_material_add
BKE_material_gpencil_get BKE_gpencil_material
BKE_material_gpencil_default_get BKE_gpencil_material_default
BKE_material_gpencil_settings_get BKE_gpencil_material_settings
|
|
|
|
In its current version that was a totally useless extra layer of crap
that we can totally avoid. Plus name was bad too.
|
|
|
|
Set and clear parents for all elements in the selection in the outliner.
This also removes the popup menu for setting the parent to curves,
armatures, and lattices. It makes more sense to keep the outliner
simple and only do object parenting.
|
|
`IFACE_` is for short strings always shown in UI (like labels of buttons,
menu entries...). Every thing else, especially when more than a couple
of words, must use `TIP_`.
|
|
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
The grease pencil materials only can be assigned to objects of grease pencil type.
|
|
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
|
|
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
There were at least three copies of those:
- OB_RECALC* family of flags, which are rudiment of an old
dependency graph system.
- PSYS_RECALC* which were used by old dependency graph system
as a separate set since the graph itself did not handle
particle systems.
- DEG_TAG_* which was used to tag IDs.
Now there is a single set, which defines what can be tagged
and queried for an update. It also has some aggregate flags
to make queries simpler.
Lets once and for all solve the madness of those flags, stick
to a single set, which will not overlap with anything or require
any extra conversion.
Technically, shouldn't be measurable user difference, but some
of the agregate flags for few dependency graph components did
change.
Fixes T58632: Particle don't update rotation settings
|
|
Makes it simpler to make some changes...
Also fix order of some includes (use alphabetical please).
|
|
That kind of implicit includes should really only be done when totally,
absolutely necessary, and ideally only with rather simple 'second-level'
headers.
Otherwise not being explicit with includes always end up biting in
unexpected ways...
|
|
|
|
Use drag&drop to parent objects in the outliner by holding down shift.
Previously it was easy to accidently parent objects and there was no way to notice it immediatly.
In some views it is possible to parent objects without using shift; should be obvious from context.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D3812
|
|
Reviewers: brecht
Differential Revision: https://developer.blender.org/D3814
|
|
Reviewers: brecht
Differential Revision: https://developer.blender.org/D3811
|
|
Reviewers: brecht
Differential Revision: https://developer.blender.org/D3810
|
|
`BKE_libblock_find_name()` expects ID names *without* ID type 'prefix'...
|
|
|
|
|
|
|
|
* Drag and drop between multiple outliners now works.
* Dragging the icon and text now give the same results.
* Fixes various crashes.
|
|
Currently drop operators work mostly by specifying the name of the datablock.
However there can be datablocks with the same name in different libraries, so
this gives wrong results in some cases.
Currently only outliner drop operators have been updated to use this mechanism.
|
|
|
|
|
