| Age | Commit message (Collapse) | Author |
|---|
|
* Added missing prototype from arithb
* Added define for Axis-Angle rotations. This has not yet been hooked up for actual usage yet, since there are some issues regarding evaluation which I'd like to investigate further first.
* Editing numbuttons for posechannel transforms now updates in realtime. Sending ND_POSE|ND_TRANSFORM was causing confusion for the listeners (which only check for either/or)
* Partial fix for axis drawing on bones. Now the axes are drawn at the tips of the bones again, but unfortunately the texts aren't (since they only use the object matrix, they get drawn at the origin).
|
|
* Missed one posemode flag-to-mode switch, drawing of armatures works correct now.
|
|
* Pose mode was already object-localized, but moved the flag from object->flag to object->mode, with all the other modes.
* Updated object mode RNA
* Commented out some dubious use of base->flag with the posemode flag. So far as I could see the value was only being set, not read, so a hopefully safe change.
|
|
* Weightpaint is now object-local like sculpt and vertexpaint.
* Fixed a bug spotted by DingTo, going from editmode to sculptmode didn't fully leave editmode
|
|
* A number-counter cursor is now used while sampling the curve
* Fixed some of the drawing errors with the paths. Unfortunately, when the armature is rotated, the path text is drawn in the wrong places still...
|
|
Keyframes are now prepared for drawing by being added to a binary-tree structure instead of using insertion-sort on a Double-Linked List. This gives rather significant improvements on a few bad cases (*).
I've implemented a basic Red-Black Tree whose nodes/data-structures can also be used as a simple Double-Linked List (ListBase) for this purpose. The implementation of this tree currently does not have support for removing individual nodes, since such capabilities aren't needed yet.
Stats (using keyframes from an imported .bvh animation file):
* When only the keyframes are drawn (i.e. long keyframes are not identified), the time needed to draw the DopeSheet region 10 times went down from 4000ms to about 300ms.
* When long keyframes are considered as well, the same test has gone from 6000ms to 3000ms. There is still a bottleneck there that I haven't been able to remove yet (an attempt at this made the runtimes go through the roof - 32000 ms for the test done here).
Assorted Notes:
* Added missing headers for some files
* Fixed profiling flags for mingw. There was an extra space which prevented the sound-code from compiling.
|
|
21330 to 21469
|
|
* Removed the glaMapping stuff in favour of remapping the keyframes manually. The old code was causing some mess, and not really working well for the DopeSheet with various mappings being used.
* Fixed NLA-mapped selection in DopeSheet. Clicking on individual keyframes should now work ok. More testing required though.
* Keyframes in DopeSheet are now drawn fully using OpenGL (instead of icons). They look less tactile now, but this may be compensated with in terms of speed? Previously I disabled this type of drawing due to issues with some cards. Enabled again for now, but mainly because I couldn't get the icons to line up nicely in screenspace...
* Borderselect in DopeSheet. I've had a look at issues with it selecting the wrong channel's keyframes. The issues don't seem to be solved yet though... will look again tomorrow.
|
|
It's just a straight application of the normal operator for now, none of the normal manipulator goodies yet (no draw code and you have to click to confirm).
|
|
While trying to fix the mapping conversions for repeat, I came across some limitations with the current (soon to be previous) mapping methods.
Now the mapping conversions should work nicely for all places that use them.
|
|
* Compiling broke for some users on this file due to my scaling-fixes commit. Dunno why this didn't give any errors here (silly compiler!)
* Restored code to make ghost poses (and supposedly paths) work again. This doesn't totally seem to be the case yet though.
|
|
Text drawing in 3D window fixed, using BLF default font (yes, nice AA'ed
fonts too :)
Solved it by gathering all strings that needs to be drawn for an object,
and then draw in end of object drawing, in pixelspace. Also cleaned up
some of the code for projecting 3d coords, much nicer now (mat stored in
region-view3d)
|
|
1) Remove WITH_FREETYPE2 from code, so now blender always need freetype2
2) Remove the old bmfont
3) Remove ftfont and bFTGL library
4) Implement a new BLF_draw_default function for place that still need/use
the old BMF api.
I try to update both, scons and cmake, but I only can test with make, so
hope all work fine.
MSVC is broken, but I don't have Windows, things to search and fix are
any reference to WITH_FREETYPE2, FTGL and BMFONT (take in care that
blenkernel also have a BKE_bmfont.h, this don't have anything to do with bmfont).
Always have to link/include the freetype2 library
Remove any reference to libbmfont
Remove any reference to libftfont
Remove any reference to libbftgl (or libbFTGL)
|
|
clean out some other day).
|
|
View3D has been split now in a local part (RegionView3D) and a
per-area part (old View3D). Currently local is:
- view transform
- camera zoom/offset
- gpencil (todo)
- custom clipping planes
Rest is in Area still, like active camera, draw type, layers,
localview, custom centers, around-settings, transform widget,
gridlines, and so on (mostly stuff as available in header).
To see it work; also added new feature for region split,
press SHIFT+ALT+CTRL+S for four-split.
The idea is to make a preset 4-split, configured to stick
to top/right/front views for three views.
Another cool idea to explore is to then box-clip all drawing
based on these 3 views.
Note about the code:
- currently view3d still stores some depricated settings, to
convert from older files. Not all settings are copied over
though, like custom clip planes or the 'lock view to object'.
- since some view3d ops are now on area level, the operators
for it should keep track of that.
Bugfix in transform: quat initialize in operator-invoke missed
one zero.
Als brought back GE to compile for missing Ipos and channels.
|
|
Cleanup warnings from Joshua's commit (mostly unused variables,
but also used functions that were not prototyped).
Two bugfixes; passing on &ob->adt instead of ob->adt
But; the DNA system is now messed up, with two structs using
the same ID (nAction and bAction), that goes horrible wrong!
|
|
Finally, here is the basic (functional) prototype of the new animation system which will allow for the infamous "everything is animatable", and which also addresses several of the more serious shortcomings of the old system. Unfortunately, this will break old animation files (especially right now, as I haven't written the version patching code yet), however, this is for the future.
Highlights of the new system:
* Scrapped IPO-Curves/IPO/(Action+Constraint-Channels)/Action system, and replaced it with F-Curve/Action.
- F-Curves (animators from other packages will feel at home with this name) replace IPO-Curves.
- The 'new' Actions, act as the containers for F-Curves, so that they can be reused. They are therefore more akin to the old 'IPO' blocks, except they do not have the blocktype restriction, so you can store materials/texture/geometry F-Curves in the same Action as Object transforms, etc.
* F-Curves use RNA-paths for Data Access, hence allowing "every" (where sensible/editable that is) user-accessible setting from RNA to be animated.
* Drivers are no longer mixed with Animation Data, so rigs will not be that easily broken and several dependency problems can be eliminated. (NOTE: drivers haven't been hooked up yet, but the code is in place)
* F-Curve modifier system allows useful 'large-scale' manipulation of F-Curve values, including (I've only included implemented ones here): envelope deform (similar to lattices to allow broad-scale reshaping of curves), curve generator (polynomial or py-expression), cycles (replacing the old cyclic extrapolation modes, giving more control over this). (NOTE: currently this cannot be tested, as there's not access to them, but the code is all in place)
* NLA system with 'tracks' (i.e. layers), and multiple strips per track. (NOTE: NLA system is not yet functional, as it's only partially coded still)
There are more nice things that I will be preparing some nice docs for soon, but for now, check for more details:
http://lists.blender.org/pipermail/bf-taskforce25/2009-January/000260.html
So, what currently works:
* I've implemented two basic operators for the 3D-view only to Insert and Delete Keyframes. These are tempolary ones only that will be replaced in due course with 'proper' code.
* Object Loc/Rot/Scale can be keyframed. Also, the colour of the 'active' material (Note: this should really be for nth material instead, but that doesn't work yet in RNA) can also be keyframed into the same datablock.
* Standard animation refresh (i.e. animation resulting from NLA and Action evaluation) is now done completely separate from drivers before anything else is done after a frame change. Drivers are handled after this in a separate pass, as dictated by depsgraph flags, etc.
Notes:
* Drivers haven't been hooked up yet
* Only objects and data directly linked to objects can be animated.
* Depsgraph will need further tweaks. Currently, I've only made sure that it will update some things in the most basic cases (i.e. frame change).
* Animation Editors are currently broken (in terms of editing stuff). This will be my next target (priority to get Dopesheet working first, then F-Curve editor - i.e. old IPO Editor)
* I've had to put in large chunks of XXX sandboxing for old animation system code all around the place. This will be cleaned up in due course, as some places need special review.
In particular, the particles and sequencer code have far too many manual calls to calculate + flush animation info, which is really bad (this is a 'please explain yourselves' call to Physics coders!).
|
|
- Weightpaint back (CTRL+TAB or menu)
Also weightpaint is sortof non-modal, allowing to use all existing
hotkeys while in paint mode. Only leftmouse is overridden.
- Made vpaint and wpaint entirely local, stored in scene (and saved!)
- Small bugfix (also in 2.48): on weightpaint mode, all armature objects
in 3d window were drawing as active poses. Now only the armature
deformer is.
Nice point for the UI agenda: are paint modes on ACTION mouse? Only then
you can combine it with SELECT mouse...
|
|
- Armature editmode back
- Armature pose and editmode selecting with mouse back
- Posemode only works with 3d window header now.
|
|
More linking issues with armature commit, but we'll get there :)
|
|
Put back Armature/Pose code, including 'heat weight'.
I've added reeb.h to get things compile, but Martin will
cleanup files and put back?
Now where to put all vertexgroup code.... I guess mesh?
Note for msvc: yep, another new dir to add! :)
|
|
Think global, act local!
The old favorite G.scene gone! Man... that took almost 2 days.
Also removed G.curscreen and G.edbo.
Not everything could get solved; here's some notes.
- modifiers now store current scene in ModifierData. This is not
meant for permanent, but it can probably stick there until we
cleaned the anim system and depsgraph to cope better with
timing issues.
- Game engine G.scene should become an argument for staring it.
Didn't solve this yet.
- Texture nodes should get scene cfra, but the current implementation
is too tightly wrapped to do it easily.
|
|
From the anti-globalization department:
G.obedit terminated!
Wherever possible, use CTX_data_edit_object(C) to get this
now. It's stored in scene now, and the screen context has
it defined.
|
|
Cleanup
- for portablity we can keep the old ugly defines for retrieving
active object, cfra and so on. But, they will use 'scene' not
G.scene.
- fixed code that uses those defines.
- some unused variables/functions removed
|
|
Initial commit of drawing code for Action Editor / Dopesheet. By default, the Dopesheet is now enabled (like in AnimSys2). There are still a few unresolved problems (like bad alpha blending for icons, and keyframes still not being drawn). However, these will be resolved in due course.
|
|
Put back armature drawing code.
The BIF_editarmature.h is a placeholder... need it to get it work.
|
