Age | Commit message (Collapse) | Author |
|
|
|
* Subversion bump (also for init_userdef_do_versions).
* Minor fix for compilation without ffmpeg.
|
|
Added callback to drawMappedFaces which checks if two faces have got equal draw options.
After discussion with Brecht we found it's nicest solution for now:
- Disabling VBOs in edit mode for this case wouldn't be nicer for this case -
some additional flag stored in DM should be added in this case.
- Adding new callback in DM isn't nicer that this solution.
- Handling face selection in drawobject would lead to duplicated code
which is also not nice.
Hopefully, this callback could handle all cases in the future.
Also, Brecht mentioned current VBO implementation isn't perfect, so maybe
when we'll redesign this area dealing with edit mode wouldn't be so tricky.
|
|
|
|
and BGE" by me.
Description from the tracker:
"It's really handy to be able to prevent an object/material from casting a shadow. So, I made use of the Cast Buffer Shadows option in the material settings, and made it work in the viewport and the BGE."
|
|
|
|
- operator strings were doing undo pushes (in fileselector text for example), this is dumb since the operators themselves handle undo.
- interface code checks rna props are arrays rather then checking the array length.
- disable properties window pin undoing.
- sequencer refresh was calling undo, disable since this is clearnign global data not handled by undo.
- added commented out code for drawing mesh vertex index/key index, useful for debugging shapekey - hook issyes.
|
|
|
|
selected armature object when they were in pose mode.
|
|
|
|
enabled
|
|
Adds new speaker object type.
Notes:
* Needs some nice icons
* Quickily review by Joshua Leung (5 mins)
* Properties UI updated (with help of Thomans Dinges)
* Speakers have their own theme color
* No real audio functionality yet.
* Minor bug regarding lamps/lattices fixed in interface_templates.c
I personality tested:
* Creation, Deletion, Duplication
* Saving, Loading
* Library linking (incl. make local)
* Tracking
* Dope Sheet, Outliner
* Animation
* Drawing (incl. Theme)
|
|
From what I can tell there is no good fix for this bug, calculating the 2d/3d viewborder and then attempting to align them to be pixel perfect fails because of float imprecision.
Added a workaround, so the camera border is always drawn in 2d space,
since this workaround may cause problems later on its kept under the define VIEW3D_CAMERA_BORDER_HACK so we can get old behavior back easily.
|
|
for width and height of billboards, relative to the particle size. It's useful when the particle size is primarily used for collision and the like, so the billboard appearance can be adjusted independently. Also allows non-square billboards.
In addition the billboards can be scaled by the particle velocity with optional head and tail factors (similar to line drawing options). This allows for pseudo-motionblur effects.
|
|
enabled.
|
|
|
|
ED_view3d_init_mats_rv3d was calling glMultMatrixf() which was mostly harmless but could also lead to confusing bugs (2 reported previously).
Looked into this and every call to ED_view3d_init_mats_rv3d except for object drawing, doesn't need this so made a second version of ED_view3d_init_mats_rv3d - ED_view3d_init_mats_rv3d_gl which does the matrix multiplication, remove confusing checks in selection code.
|
|
|
|
|
|
|
|
mouse coords would with cont. grab would wrap at short.
use mouse coords as int rather then short.
this problem still happens on linux because of XTranslateCoordinates
|
|
from Andy Braham (andybraham)
This adds support for empties to reference images and draw in the 3D view.
Modifications from the original patch.
- use an empty draw 'image' type
- use image aspect ratio for non-square-pixels
- when the image is not found, still draw the frame.
|
|
Depth test got re-enabled without check if it was necessary.
|
|
|
|
|
|
adjust to use floats.
|
|
|
|
|
|
algorithm remains
the same, but big changes have happened both on the outside and on the inside.
New UI:
* The old parameters were quite true to the underlying algorithm, but were quite obscure
from a users point of view. Now there are only a few intuitive basic parameters that
define the basic fluid behavior.
** By default particle size is now used to determine the interaction radius, rest
density and spring rest lengths so that it's easy to get stable simulations by simply
emitting particles for a few frames and adjusting the particle size (easy when the
particle size is drawn) so that the fluid appears continuous (particles are touching
eachother).
** Stiffness - in reality most fluids are very incompressible, but this is a very hard
problem to solve with particle based fluid simulation so some compromises have to be
made. So the bigger the stiffness parameter is the less the fluid will compress under
stress, but the more substeps are needed for stable simulation.
** Viscosity - how much internal friction there is in the fluid. Large viscosities also
smooth out instabilities, so less viscous fluids again need more substeps to remain
stable.
** Buoancy - with high buoancy low pressure areas inside the fluid start to rise against
gravity, and high pressure areas start to come down.
* In addition to these basic parameters there are separate advanced parameters that can
either be tweaked relative to the basic parameters (or particle size) or defined
independently.
** Repulsion - the stiffness parameter tries to keep the fluid density constant, but this
can lead to small clumps of particles, so the repulsion keeps the particles better
separated.
** Stiff viscosity - the normal viscosity only applies when particles are moving closer to
eachother to allow free flowing fluids. Stiff viscosity also applies smoothing to
particles that are moving away from eachother.
** Interaction radius - by default this is 4 * particle size.
** Rest density - by default this is a density that the particles have when they're packed
densely next to eachother.
** Spring rest length - by default this is 2 * particle size.
* There are also new options for 3d view particle coloring in the display panel to show
particle velocity and acceleration. These make it easier to see what's happening in the
fluid simulations, but can of course be used with other particles as well.
* Viscoelastic springs have some new options too. The plasticity can now be set to much
higher values for instant deletion of springs as the elastic limit is exeeded. In addition
to that there is an option to only create springs for a certain number of frames when a
particle is born. These options give new possibilities for breaking viscoelastic fluids.
New in the code:
* Most of the fluids code is now thread safe, so when particle dynamics go threaded there
will be a nice speed boost to fluids as well.
* Fluids now use a bvh-tree instead of a kd-tree for the neighbor lookups. The bvh-tree
implementation makes the code quite a bit cleaner and should also give a slight speed
boost to the simulation too.
* Previously only force fields were calculated with the different integration methods, but
now the fluid calculations are also done using the selected integration method, so there
are again more choices in effecting simulation accuracy and stability. This change also
included a nice cleanup of the whole particle integration code.
As the internals are pretty stirred up old particle fluid simulations will probably not
work correctly straight away, but with some tweaking the same level of control is still
available by not using the "relative versions" of the advanced parameters (by default these
are not used when loading old files).
|
|
ASCII lookup table wasn't being freed when when the rest of the glyphs were.
Also found own bug where mesh stat text was using wrong sized array (char[3] as char[4]).
|
|
Very bad crashing in using "Not AA fonts" and drawing length info
on EditMesh. This uses the call BLF_draw_ascii() which apparently
corruptes then badly. Disabled the call for now, and wait for fix.
In the course of testing, added proper strlen storage for draw
in this code.
Added strlen
|
|
|
|
|
|
|
|
|
|
header static for blenlib, blenkernel and editors.
|
|
most local modifier,GPU,ImBuf and Interface functions are now static.
also fixed an error were the fluid modifier definition and the header didnt have the same number of args.
|
|
python functions.
- use NULL rather then 0 where possible (makes code & function calls more readable IMHO).
- set static variables and functions (exposed some unused vars/funcs).
- use func(void) rather then func() for definitions.
|
|
- modifier code was using sizeof() without knowing the sizeof the array when clearing the modifier type array.
- use BLI_snprintf rather then sprintf where the size of the string is known.
- particle drawing code kept a reference to stack float values (not a problem at the moment but would crash if accessed later).
|
|
* Particle draw data wasn't freed properly in some cases.
* Velocity + circle draw type also crashed due to missing null pointer check.
|
|
also minor functional changes
- OBJECT_OT_make_links_data() type property is now assigned to the operator property (so popup menu can find it)
- removing BG image now returns cancelled if no image is removed.
|
|
also make rna function for new images require width and hight args.
|
|
'cd' could be NULL, all other particle draw types checked 'cd' except for PART_DRAW_AXIS, seems logical to have the check here too.
|
|
- move GS() define into DNA_ID.h
- add BLI_utildefines as an automatic include with makesrna generated files.
|
|
MAKE_ID, FILE_MAXDIR, moved the generic defines to BLI_utildefines.h.
no functional changes.
|
|
Use object's displists for storing deformed tesselated curve. Was unable to
totally get rid of curve's displist because of how texture space is calculating.
|
|
annoyingly when flying the lamp about to position it.
|
|
Child-of constraint issue: on adding, it wasn't checking owner
correctly for Bones, resulting in a constraint working in wrong
space; it looked as if transform was applied double when moving
the object. Only adding via Py API went wrong btw.
Also found a silly check for drawing constraints, which caused
constraint initialization to happen for every object on every
redraw!
Implementation note: con->flag CONSTRAINT_SPACEONCE was only used
for child-of constraints in Bones, so I've patched it on file
reading to always set the flag. Marked with XXX, so it can be
removed one day. Now at least things get corrected well for
imported armatures.
|
|
need for each view to store every views combine data mask.
|
|
- made theme colors for mesh edge len & face angle/area display.
- use %g rather then %f for float display, trims unneeded zeros.
- store cached 2d and 3d text color as bytes rather then floats, compare when drawing to avoid setting the context.
- use unsigned char for more color functions, avoids casting to glColorubv().
|