| Age | Commit message (Collapse) | Author |
|---|
|
Previously any of the named views could not have any roll,
this commit supports roll as long as it's axis-aligned (90,180,270 deg).
This is useful for snapping to views,
an improvement on cebd025e02f11.
|
|
|
|
This file was originally a placeholder for all the old functions that
have not yet been ported to the new draw system. Over time all the
functions that needed refactor were gone, and the functions here are
still needed.
While moving the functions around I removed dead code and made sure the
existent comments start with a capital letter and end with a full stop.
|
|
Out of bounds buffer unit-system index with zoomed out viewport.
|
|
|
|
Viewport: Disable Clipping For EEVEE and External Renderers
Currently it is possible that, when using viewport clipping, the display and tools communicate
different information to the user then the renderer does. The reason is
that the renderer does not support viewport clipping. Both EEVEE and
Cycles do not support it.
This patch will disable the clipping in all the tools and drawing code
when the viewport drawing mode is `Material Preview` or `Rendered`.
This patch introduces a `RV3D_CLIPPING_ENABLED` util that checks if
clipping is enabled for the given `rv3d` and `v3d`. Also in places where
it was needed we added the `ViewContext` as a carrier for the `View3D`
and `RegionView3D`.
There are a few areas in the tooling (select, projection painting) that
still needs to be tackled after this patch.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6047
|
|
Multisample buffers were used for smooth line drawing. As we now have
an algorithm that doesn't need the multisample buffers we can remove
them.
The user preference for viewport multi_sampling is replaced by single
toggle overlay `use_overlay_smooth_wire`. By default this setting is
enabled as the new drawing is really quick (<1ms) and uses zero hacks.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6367
|
|
|
|
This patch will allow the user to select the EEVEE renderpass to be
shown in the viewport by default the combined pass will be shown.
Limitations:
* Viewport rendering stores the result in a `RenderResult`. RenderResult
is not aware of the type of data it holds. In many places where RenderResult
is used it is assumed that it stores a combined pass and the display+view
transform are applied.
I will propose to fix this in a future patch. But that is still being
designed and discussed.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6319
|
|
This commit adds a shadow to the grid scale info text in the 3d View,
to make it more visible like the rest of that section.
{F7798605}
Differential Revision: https://developer.blender.org/D6025
|
|
When the result isn't used, prefer post increment/decrement
(already used nearly everywhere in Blender).
|
|
This change implements the basics as described in {T68312} for the
shading modes.
* LookDev shading mode is renamed to Material Preview. It always uses Eevee as renderer, and is intended to provide a fast material preview suitable for texture painting, and texture and material setup.
* Rendered shading gains "Use Scene Lights" and "Use Scene World" options similar to current Material Preview. These will be enabled by default. When Use Scene World is turned off, HDRIs will be used for lighting instead. These options are available for EEVEE and Cycles.
* Renderers will be able to customize the shading settings panel and add additional settings.
Reviewed By: brecht, fclem
Differential Revision: https://developer.blender.org/D5612
|
|
|
|
|
|
The original code was commented on.
Unlike blender 2.79, the grid units are now displayed only when RV3D_VIEW_IS_AXIS.
The visible subdivisions in the grid are made by the GPU and depending on the pixel.
The code used here only mimics this behavior and adds a bit of overhead.
Reviewers: fclem, campbellbarton
Subscribers: FloridaJo, zlsa, rl.amorato, EitanSomething
Differential Revision: https://developer.blender.org/D4325
|
|
This is a step to finish the D4325 and fix the T61286.
Currently the grid is highlighted in steps of 10 out of 10, which is wrong for the imperial units as seen in `buImperialLenDef`.
The idea of the code is to pass the steps of the grid already dimensioned as a uniform.
Another important thing to note is that subdivisions now only affect the grid without unity.
This matches the 2.7x Blender versions.
No performance loss (almost no gain too).
Reviewers: fclem
Subscribers: zlsa, rl.amorato
Differential Revision: https://developer.blender.org/D4379
|
|
Avoids calculating the visible part of a region whenever
on-screen overlays are drawn.
|
|
This change ensures that operators which needs access to evaluated data
first makes sure there is a dependency graph.
Other accesses to the dependency graph made it more explicit about
whether they just need a valid dependency graph pointer or whether they
expect the graph to be already evaluated.
This replaces OPTYPE_USE_EVAL_DATA which is now removed.
Some general rules about usage of accessors:
- Drawing is expected to happen from a fully evaluated dependency graph.
There is now a function to access it, which will in the future control
that dependency graph is actually evaluated.
This check is not yet done because there are some things to be taken
care about first: for example, post-update hooks might leave scene in
a state where something is still tagged for update.
- All operators which needs to access evaluated state must use
CTX_data_ensure_evaluated_depsgraph().
This function replaces OPTYPE_USE_EVAL_DATA.
The call is generally to be done in the very beginning of the
operator, prior other logic (unless this is some comprehensive
operator which might or might not need access to an evaluated state).
This call is never to be used from a loop.
If some utility function requires evaluated state of dependency graph
the graph is to be passed as an explicit argument. This way it is
clear that no evaluation happens in a loop or something like this.
- All cases which needs to know dependency graph pointer, but which
doesn't want to actually evaluate it can use old-style function
CTX_data_depsgraph_pointer(), assuming that underlying code will
ensure dependency graph is evaluated prior to accessing it.
- The new functions are replacing OPTYPE_USE_EVAL_DATA, so now it is
explicit and local about where dependency graph is being ensured.
This commit also contains some fixes of wrong usage of evaluation
functions on original objects. Ideally should be split out, but in
reality with all the APIs being renamed is quite tricky.
Fixes T67454: Blender crash on rapid undo and select
Speculation here is that sometimes undo and selection operators are
sometimes handled in the same event loop iteration, which leaves
non-evaluated dependency graph.
Fixes T67973: Crash on Fix Deforms operator
Fixes T67902: Crash when undo a loop cut
Reviewers: brecht
Reviewed By: brecht
Subscribers: lichtwerk
Maniphest Tasks: T67454
Differential Revision: https://developer.blender.org/D5343
|
|
Setting the 3D view cursor on startup could crash because the
viewport hasn't been assigned to the region.
|
|
A mouse click in the window will trigger the `VIEW3D_OT_cursor3d` operator
before the viewport is available. This causes a segfault in
`GPU_viewport_engines_data_validate()`.
Other callers of `WM_draw_region_get_viewport()` already check for `NULL`
being returned and handle it gracefully.
Reviewed By: jbakker, fclem
Differential Revision: https://developer.blender.org/D5216
|
|
This was caused by wrong pixsize calculation during selection.
Note that this was affecting selectability of lamps too.
|
|
- Add 'Navigation Buttons' preference, used for 2D views
(previously this couldn't be disabled).
- Add "Off" option for 3D view axis.
- Support minimal axis with navigation buttons.
|
|
This is enabled with bl_use_eevee_viewport = True. It allows external engines
to generate an Cycles/Eevee shader node setup to emulate their materials in
the realtime viewport, or to leave it to users to do manually.
Removed bl_use_exclude_layers and bl_use_shading_nodes that did nothing
anymore. This should not break API compatibility, any scripts setting those
should continue to work the same as before.
Also adds descriptions for some RenderEngine settings.
|
|
When rendering viewport to an offscreen buffer the buffer was
constructed for non anti aliasing (0 samples). This made the objects
that are drawn by the `object_mode` including `wireframe` draw type
non-anti-aliased.
The offscreen buffers will be constructed based on the user setting for
viewport multisampling (`U.ogl_multisamples`). The same setting will
also be used when previewing scene strips in the sequencer. For now
this only improves wireframe drawing in the scene strips. To improve the
Anti aliasing in the scene strips we need to get finer control in the
draw manager. This will be part of a different patch I am preparing.
Please note that this patch also cleansup some unused code in the offscreen rendering (FSAA code was still existing, but never called)
Reviewed By: brecht
Maniphest Tasks: T64849
Differential Revision: https://developer.blender.org/D4907
|
|
When doing offscreen rendering (Viewport Render or Sequencer Scene
strip) EEVEE and workbench used the wrong window coordinates. These
coordinates included the border that was not drawn.
Reviewed By: brecht
Maniphest Tasks: T64505
Differential Revision: https://developer.blender.org/D4864
|
|
There is now a checkbox to enable/disable depth of field per camera. For Eevee
this replace the scene level setting. For Cycles there is now only an F-Stop
value, no longer a Radius.
Existing files are converted based on Cycles or Eevee being set in the scene.
Differential Revision: https://developer.blender.org/D4882
|
|
|
|
Differential Revision: https://developer.blender.org/D4657
|
|
- Merged SEQ_OFSDRAW with V3D_OFSDRAW and define in the
DNA_view3d_types: Due to this FSAA always kicked in making the
rendering slow.
- Removed `Texture Solid` and `DOF`.
- Now when chosing Solid rendering the settings
of the original scene is used.
- Added a global override to use scene specific shading. In the
Future we will need to enhanced this so user can change the
settings.
- Added support for LookDev. LookDev crashed as it needed the
`evil_C` what was not set
- LookDev mode will always show the scene + world lights.
Reviewed By: brecht, fclem
Maniphest Tasks: T62517
Differential Revision: https://developer.blender.org/D4738
|
|
|
|
This is only working for shading batches for the moment and only if some Custom data layer are not needed anymore.
The collection rate is hardcoded at 60 sec but could be exposed to the user.
This system can be extended and discard most unused batches in the future.
This commit is in prevision of removing BKE_MESH_BATCH_DIRTY_SHADING when changing shader parameters.
|
|
Previous cleanups didn't account for space after '#'.
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
Gizmo's now have their own popover in preparation
for making transform gizmos accessible without having to use tools
See: T63518
|
|
Now we do the color management inside the Draw manager and output CM byte
buffer.
|
|
|
|
DRW_draw_depth_loop.
|
|
|
|
Match the UI naming (changed since 2.7x).
|
|
|
|
|
|
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Rename for Camera, View3D (also CameraParams & Render not DNA)
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
Was confusing eg: G_AUTOPACK belonged to G.fileflags, G_PICKSEL to G.f.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
|
|
|
|
Only for workbench solid/wire modes.
|
