| Age | Commit message (Collapse) | Author |
|---|
|
This commit adds a new face nearest snapping mode, adds new snapping
options, and (lightly) refactors code around snapping.
The new face nearest snapping mode will snap transformed geometry to the
nearest surface in world space. In contrast, the original face snapping
mode uses projection (raycasting) to snap source to target geometry.
Face snapping therefore only works with what is visible, while nearest
face snapping can snap geometry to occluded parts of the scene. This new
mode is critical for retopology work, where some of the target mesh
might be occluded (ex: sliding an edge loop that wraps around the
backside of target mesh).
The nearest face snapping mode has two options: "Snap to Same Target"
and "Face Nearest Steps". When the Snap to Same Object option is
enabled, the selected source geometry will stay near the target that it
is nearest before editing started, which prevents the source geometry
from snapping to other targets. The Face Nearest Steps divides the
overall transformation for each vertex into n smaller transformations,
then applies those n transformations with surface snapping interlacing
each step. This steps option handles transformations that cross U-shaped
targets better.
The new snapping options allow the artist to better control which target
objects (objects to which the edited geometry is snapped) are considered
when snapping. In particular, the only option for filtering target
objects was a "Project onto Self", which allowed the currently edited
mesh to be considered as a target. Now, the artist can choose any
combination of the following to be considered as a target: the active
object, any edited object that isn't active (see note below), any non-
edited object. Additionally, the artist has another snapping option to
exclude objects that are not selectable as potential targets.
The Snapping Options dropdown has been lightly reorganized to allow for
the additional options.
Included in this patch:
- Snap target selection is more controllable for artist with additional
snapping options.
- Renamed a few of the snap-related functions to better reflect what
they actually do now. For example, `applySnapping` implies that this
handles the snapping, while `applyProject` implies something entirely
different is done there. However, better names would be
`applySnappingAsGroup` and `applySnappingIndividual`, respectively,
where `applySnappingIndividual` previously only does Face snapping.
- Added an initial coordinate parameter to snapping functions so that
the nearest target before transforming can be determined(for "Snap to
Same Object"), and so the transformation can be broken into smaller
steps (for "Face Nearest Steps").
- Separated the BVH Tree getter code from mesh/edit mesh to its own
function to reduce code duplication.
- Added icon for nearest face snapping.
- The original "Project onto Self" was actually not correct! This option
should be called "Project onto Active" instead, but that only matters
when editing multiple meshes at the same time. This patch makes this
change in the UI.
Reviewed By: Campbell Barton, Germano Cavalcante
Differential Revision: https://developer.blender.org/D14591
|
|
into enums
The transformation snapping code contains a bunch of `#define`s, some ambiguously or incorrectly named attributes. This patch contains refactored code to improve this. This patch does (should) not change functionality of snapping.
Clarified ambiguously / incorrectly named attributes.
- "Target" is used to refer to the part of the source that is to be snapped (Active, Median, Center, Closest), but several other areas of Blender use the term "target" to refer to the thing being snapped to and "source" to refer to the thing getting snapped. Moreover, the implications of the previous terms do not match the descriptions. For example: `SCE_SNAP_TARGET_CENTER` does not snap the grabbed geometry to the center of the target, but instead "Snap transforamtion center onto target".
- "Select" refers to the condition for an object to be a possible target for snapping.
- `SCE_SNAP_MODE_FACE` is renamed to `SCE_SNAP_MODE_FACE_RAYCAST` to better describe its affect and to make way for other face snapping methods (ex: nearest).
Refactored related `#define` into `enum`s. In particular, constants relating to...
- `ToolSettings.snap_flag` are now in `enum eSnapFlag`
- `ToolSettings.snap_mode` are now in `enum eSnapMode`
- `ToolSettings.snap_source` (was `snap_target`) are now in `enum eSnapSourceSelect`
- `ToolSettings.snap_flag` (`SCE_SNAP_NO_SELF`) and `TransSnap.target_select` are now in `enum eSnapTargetSelect`
As the terms became more consistent and the constants were packed together into meaningful enumerations, some of the attribute names seemed ambiguous. For example, it is unclear whether `SnapObjectParams.snap_select` referred to the target or the source. This patch also adds a small amount of clarity.
This patch also swaps out generic types (ex: `char`, `short`, `ushort`) and unclear hard coded numbers (ex: `0`) used with snap-related enumerations with the actual `enum`s and values.
Note: I did leave myself some comments to follow-up with further refactoring. Specifically, using "target" and "source" consistently will mean the Python API will need to change (ex: `ToolSettings.snap_target` is not `ToolSettings.snap_source`). If the API is going to change, it would be good to make sure that the used terms are descriptive enough. For example, `bpy.ops.transform.translate` uses a `snap` argument to determine if snapping should be enabled while transforming. Perhaps `use_snap` might be an improvement that's more consistent with other conventions.
This patch is (mostly) a subset of D14591, as suggested by @mano-wii.
Task T69342 proposes to separate the `Absolute Grid Snap` option out from `Increment` snapping method into its own method. Also, there might be reason to create additional snapping methods or options. (Indeed, D14591 heads in this direction). This patch can work along with these suggestions, as this patch is trying to clarify the snapping code and to prompt more work in this area.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D15037
|
|
Add support for adding (inserting) new background images into an
override of a linked Camera ID.
Request from the Blender studio.
This ended up being more involved than expected as it uncovered some
latent issues with existing background images code. Noticiably, a new
`BKE_camera_background_image_copy` had to be added to handle copying
of background images in a proper, generic ID-management way.
|
|
Linked ID is (almost) never editable... Also rename that function to add
the `_poll` suffix.
|
|
Assuming that an ID pointer is NULL because another 'source type'
property has some specific value is utterly wrong and a gateway to
usercounting bugs.
|
|
Dropping would pass the name of the ID to drop to the properties of the
drop operator. This would then lookup the ID by name. With linking
and/or library overrides, multiple IDs of the same name and type may
exist, which is why the session UUID should be used instead. All
operators used for dropping support this now and the drop code passes
the session UUID instead of the name.
Also see 917c096be6b9 and 8f79fa9c6780.
Some drop operators were already using the session UUIDs. This converts
the remaining ones. The "name" property is kept working as before, since
some scripts use this.
Side-effect: The "Name" property won't show up in the Adjust Last
Operation anymore, which was the case for some of these operators, and
its value won't be remembered over multiple executions of the operator.
Both were not at all useful from what I can tell, and I doubt this was
done intentionally.
|
|
Activating a gizmo used the windows eventstate which may have values
newer than the event used to activate the gizmo.
This meant transforms check for the key that activated transform
could be incorrect.
Support passing an event when calling operators to avoid this problem.
|
|
This is needed since 4d0f846b936c9101ecb76a6db962aac2d74a460a
however change in the operator instead of the event handler is correct,
as accepting a press event should suppress drag events unless
the pass-through flag is set.
This is how select & tweak already works.
|
|
- Rename ED_view3d_win_to_delta `mval` argument to `xy_delta` as it
as it was misleading since this is an screen-space offset not a region
relative cursor position (typical use of the name `mval`).
Also rename the variable passed to this function which also used the
term `mval` in many places.
- Re-order the output argument of ED_view3d_win_to_delta last.
use an r_ prefix for return arguments.
- Document how the `zfac` argument is intended to be used.
- Split ED_view3d_calc_zfac into two functions as the `r_flip` argument
was only used in some special cases.
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
The view3d_edit.c file is already getting big (5436 lines) and mixes
operators of different uses.
Splitting the code makes it easier to read and simplifies the
implementation of new features.
Differential Revision: https://developer.blender.org/D13976
|
|
Outliner would frame the armature object instead of the bone if the bone
was on a hidden armature layer.
Similar to issues reported in e.g. T58068 and T80464, this is due to the
fact that `BKE_pose_channel_active` always checks for the armature layer
(and returns NULL if a bone is not on a visible armature layer).
Now propose to make this layer check **optional** (and e.g. from the
Outliner be more permissive). This also introduces
`BKE_pose_channel_active_if_layer_visible` which just wraps
`BKE_pose_channel_active` with the check being ON.
Maniphest Tasks: T92930
Differential Revision: https://developer.blender.org/D13154
|
|
Ref T92709
|
|
Was not taking into account curve points at all.
Maniphest Tasks: T93198
Differential Revision: https://developer.blender.org/D13281
|
|
Snapping to an axis aligned view with a 45 degree rotation would
set the view orthographic without setting it back to perspective
when orbiting the view as you would expect with auto-perspective.
Now orthographic is only set for views with rotation of 0, 90, 180, -90.
Notes:
- Partially reverts logic from cebd025e02f1147c48cd658816ad835f94128a4a
at the time RegionView3D.view_axis_roll had not been added,
so only setting the orthographic with one particular rotation
was a bigger limitation than it is now.
- Auto-perspective could be supported when snapping the viewport to
diagonal angles, however that's a larger project.
|
|
|
|
Use arrays for wmEvent coordinates, this quiets warnings with GCC11.
- `x, y` -> `xy`.
- `prevx, prevy` -> `prev_xy`.
- `prevclickx, prevclicky` -> `prev_click_xy`.
There is still some cleanup such as using `copy_v2_v2_int()`,
this can be done separately.
Reviewed By: campbellbarton, Severin
Ref D12901
|
|
Move most of the gizmo snap and placement code to `view_cursor_snap.c`.
Simplify and extend the snap API.
Differential Revision: https://developer.blender.org/D12868
|
|
Error in 986d60490c0694941e27c070780c55f07b7b4842
|
|
Move runtime parameters out of context creation.
Not being able to choose another region and v3d limits the use of the
snap API.
|
|
Match API naming prefix (BKE_vfont_*) and DNA_vfont_types.h.
|
|
While World data has always been able to be marked as an asset, there
was no way to actually use them from the asset browser. This change
allows users to drag-drop world assets onto the Viewport and have them
appended/linked to their scene.
Differential Revision: https://developer.blender.org/D12566
|
|
Mistake in own {rB69893ef27c91}.
Was mixing screen on region coordinates.
|
|
|
|
|
|
This adds the ability to cancel out of the roll using ESC or RMB
(which is not common for viewops -- but makes sense in the case of roll
I think). This resets the view as well as potential locked cameras to
the original orientations (but does not remove potential autokeys --
which no transform does on cancel btw.)
Maniphest Tasks: T89883
Differential Revision: https://developer.blender.org/D12582
|
|
Since its introduction in {rB5c569d227b64}, the view roll was based on
horizontal movement only. Using a "real" angle not only feels more
natural but also has the benefit of getting more precission the further
away from the center you are (just like regular rotation, brush/stencil
rotation etc.). A similar thing has already been implemented in the
Grease Pencil Tools Addon, now make the blender standard roll the same.
Since this is not using the transform system, we are still lacking a
line in the viewport (this could be added but since this is always based
on the center of the view we dont necessarily need this), as well as the
additional Shift-extra-precission behavior.
Fixes T89883
Maniphest Tasks: T89883
Differential Revision: https://developer.blender.org/D12582
|
|
This makes it possible to calculate orientation from functions
that don't have the context.
|
|
Reason was that the notifier did not set the NS_VIEW3D_SHADING
subtype, which the VR view listens for for a shading update.
In the case of "toggle xray", a notifier was absent altogether.
|
|
|
|
- Replace '[mce]' with "Mike Erwin".
- Remove references to turn-table author as it isn't useful information,
the author was credited in the commit message.
|
|
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
|
|
This patch fixes many minor spelling mistakes, all in comments or
console output. Mostly contractions like can't, won't, don't, its/it's,
etc.
Differential Revision: https://developer.blender.org/D11663
Reviewed by Harley Acheson
|
|
The depth cache (located in `RegionView3D::depths`) is used for quick
and simple occlusion testing in:
- particle selection,
- "Draw Curve" operator and
- "Interactive Light Track to Cursor" operator,
However, keeping a texture buffer in cache is not a recommended practice.
For displays with high resolution like 8k this represents something
around 132MB.
Also, currently, each call to `ED_view3d_depth_override` invalidates
the depth cache. So that depth is never reused in multiple calls from
an operator (this was not the case in blender 2.79).
This commit allows to create a depth cache and release it in the same
operator. Thus, the buffer is kept in cache for a short time, freeing
up space.
No functional changes.
|
|
When projecting into screen space Z value isn't always needed.
Add 2D projection functions, renaming them to avoid accidents
happening again.
- Add GPU_matrix_project_2fv
- Add ED_view3d_project_v2
- Rename ED_view3d_project to ED_view3d_project_v3
- Use the 2D versions of these functions when the Z value isn't used.
|
|
In some cases functions were defined with arguments of different array
lengths in headers vs. implementations. This commit fixes some of the
cases I ran into, but probably not all of them.
|
|
This allows the addition of the `SNAP_GEOM_CAGE` option.
Currently unused.
|
|
Now `ED_view3d_backbuf_depth_validate`, `ED_view3d_draw_depth` and
`ED_view3d_draw_depth_gpencil` are unified in `ED_view3d_depth_override`.
This new function replaces `ED_view3d_autodist_init`.
Also, since `ED_view3d_depth_update` depends on the render context, and
changing the context is a slow operation, that function also was removed,
and the depth buffer cached is now updated inside the new unified drawing
function when the "bool update_cache" parameter is true.
Finally `V3D_INVALID_BACKBUF` flag has been renamed and moved to
`runtime.flag`.
Differential revision: https://developer.blender.org/D10678
|
|
Changes include using proper and consistent grammar, simplifying
phrasing, using correct terminology, and not including python API
identifiers in tooltips.
Differential Revision: https://developer.blender.org/D9924
|
|
While this could be useful, it's been removed since 2.4x, keeping this
here doesn't help add it back since it would need to be re-implemented.
|
|
|
|
USER_ZOOM_CONT only had comments saying this was 'oldstyle',
remove these comments, add brief explanations of the zoom style
in the enum.
|
|
|
|
|
|
|
|
Approximately 195 changes of capitalization to conform to MLA title style.
UI labels and property names should use MLA title case, while descriptions
should be capitalized like regular prose, generally with only the start of
a sentence capitalized.
Differential Revision: https://developer.blender.org/D9922
|
|
Expand abbreviations for words like "Bright" (instead of "Brightness"),
"Premul", "Lib", "Dir", etc.
Differential Revision: https://developer.blender.org/D9862
|
|
|
