| Age | Commit message (Collapse) | Author |
|---|
|
Removes the following macros for scene/render frame values:
- `CFRA`
- `SUBFRA`
- `SFRA`
- `EFRA`
These macros don't add much, other than saving a few characters when typing.
It's not immediately clear what they refer to, they just hide what they
actually access. Just be explicit and clear about that.
Plus these macros gave read and write access to the variables, so eyesores like
this would be done (eyesore because it looks like assigning to a constant):
```
CFRA = some_frame_nbr;
```
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D15311
|
|
This commit adds a new face nearest snapping mode, adds new snapping
options, and (lightly) refactors code around snapping.
The new face nearest snapping mode will snap transformed geometry to the
nearest surface in world space. In contrast, the original face snapping
mode uses projection (raycasting) to snap source to target geometry.
Face snapping therefore only works with what is visible, while nearest
face snapping can snap geometry to occluded parts of the scene. This new
mode is critical for retopology work, where some of the target mesh
might be occluded (ex: sliding an edge loop that wraps around the
backside of target mesh).
The nearest face snapping mode has two options: "Snap to Same Target"
and "Face Nearest Steps". When the Snap to Same Object option is
enabled, the selected source geometry will stay near the target that it
is nearest before editing started, which prevents the source geometry
from snapping to other targets. The Face Nearest Steps divides the
overall transformation for each vertex into n smaller transformations,
then applies those n transformations with surface snapping interlacing
each step. This steps option handles transformations that cross U-shaped
targets better.
The new snapping options allow the artist to better control which target
objects (objects to which the edited geometry is snapped) are considered
when snapping. In particular, the only option for filtering target
objects was a "Project onto Self", which allowed the currently edited
mesh to be considered as a target. Now, the artist can choose any
combination of the following to be considered as a target: the active
object, any edited object that isn't active (see note below), any non-
edited object. Additionally, the artist has another snapping option to
exclude objects that are not selectable as potential targets.
The Snapping Options dropdown has been lightly reorganized to allow for
the additional options.
Included in this patch:
- Snap target selection is more controllable for artist with additional
snapping options.
- Renamed a few of the snap-related functions to better reflect what
they actually do now. For example, `applySnapping` implies that this
handles the snapping, while `applyProject` implies something entirely
different is done there. However, better names would be
`applySnappingAsGroup` and `applySnappingIndividual`, respectively,
where `applySnappingIndividual` previously only does Face snapping.
- Added an initial coordinate parameter to snapping functions so that
the nearest target before transforming can be determined(for "Snap to
Same Object"), and so the transformation can be broken into smaller
steps (for "Face Nearest Steps").
- Separated the BVH Tree getter code from mesh/edit mesh to its own
function to reduce code duplication.
- Added icon for nearest face snapping.
- The original "Project onto Self" was actually not correct! This option
should be called "Project onto Active" instead, but that only matters
when editing multiple meshes at the same time. This patch makes this
change in the UI.
Reviewed By: Campbell Barton, Germano Cavalcante
Differential Revision: https://developer.blender.org/D14591
|
|
into enums
The transformation snapping code contains a bunch of `#define`s, some ambiguously or incorrectly named attributes. This patch contains refactored code to improve this. This patch does (should) not change functionality of snapping.
Clarified ambiguously / incorrectly named attributes.
- "Target" is used to refer to the part of the source that is to be snapped (Active, Median, Center, Closest), but several other areas of Blender use the term "target" to refer to the thing being snapped to and "source" to refer to the thing getting snapped. Moreover, the implications of the previous terms do not match the descriptions. For example: `SCE_SNAP_TARGET_CENTER` does not snap the grabbed geometry to the center of the target, but instead "Snap transforamtion center onto target".
- "Select" refers to the condition for an object to be a possible target for snapping.
- `SCE_SNAP_MODE_FACE` is renamed to `SCE_SNAP_MODE_FACE_RAYCAST` to better describe its affect and to make way for other face snapping methods (ex: nearest).
Refactored related `#define` into `enum`s. In particular, constants relating to...
- `ToolSettings.snap_flag` are now in `enum eSnapFlag`
- `ToolSettings.snap_mode` are now in `enum eSnapMode`
- `ToolSettings.snap_source` (was `snap_target`) are now in `enum eSnapSourceSelect`
- `ToolSettings.snap_flag` (`SCE_SNAP_NO_SELF`) and `TransSnap.target_select` are now in `enum eSnapTargetSelect`
As the terms became more consistent and the constants were packed together into meaningful enumerations, some of the attribute names seemed ambiguous. For example, it is unclear whether `SnapObjectParams.snap_select` referred to the target or the source. This patch also adds a small amount of clarity.
This patch also swaps out generic types (ex: `char`, `short`, `ushort`) and unclear hard coded numbers (ex: `0`) used with snap-related enumerations with the actual `enum`s and values.
Note: I did leave myself some comments to follow-up with further refactoring. Specifically, using "target" and "source" consistently will mean the Python API will need to change (ex: `ToolSettings.snap_target` is not `ToolSettings.snap_source`). If the API is going to change, it would be good to make sure that the used terms are descriptive enough. For example, `bpy.ops.transform.translate` uses a `snap` argument to determine if snapping should be enabled while transforming. Perhaps `use_snap` might be an improvement that's more consistent with other conventions.
This patch is (mostly) a subset of D14591, as suggested by @mano-wii.
Task T69342 proposes to separate the `Absolute Grid Snap` option out from `Increment` snapping method into its own method. Also, there might be reason to create additional snapping methods or options. (Indeed, D14591 heads in this direction). This patch can work along with these suggestions, as this patch is trying to clarify the snapping code and to prompt more work in this area.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D15037
|
|
This should have no functional changes.
This reduce the complexity of the shader by only supporting 2 colors.
We never use more than 2 color in practice and this makes usage not require
a UBO.
|
|
Activating a gizmo used the windows eventstate which may have values
newer than the event used to activate the gizmo.
This meant transforms check for the key that activated transform
could be incorrect.
Support passing an event when calling operators to avoid this problem.
|
|
This avoids transform jumping which is a problem when tweaking values a
small amount. A fix for T40549 was made box-select used the location
when the key was pressed.
While it's important for box-select or any operator where it's expected
the drag-start location is used, this is only needed in some cases.
Since the event stores the click location and the current location,
no longer overwrite the events real location. Operators that depend on
using the drag-start can use this location if they need.
In some cases the region relative cursor location (Event.mval) now needs
to be calculated based on the click location.
- Added `WM_event_drag_start_mval` for convenient access to the region
relative drag-start location (for drag events).
- Added `WM_event_drag_start_xy` for window relative coordinates.
- Added Python property Event.mouse_prev_click_x/y
Resolves T93599.
Reviewed By: Severin
Ref D14213
|
|
|
|
Using press to activate the Tweak tool doesn't work well when used a
fallback tool as the drag event is often used by the current tool -
making it impossible not to select when dragging (unless the fallback
tool is disabled entirely).
Resolve this by using CLICK events when the Tweak tool is used as a
fallback.
Even though this avoids the crash, check for null-pointer de-reference
since changes to the key-map shouldn't cause operators to crash.
Note that the ability for operators to access a gizmo before it's fully
initialized is a more general problem that should be addressed, but out
of scope for a bug-fix.
Reviewed By: zeddb, JulienKaspar, Severin
Maniphest Tasks: T95591
Ref D14231
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
Allow the use of floating-point values for font point sizes, which
allows greater precision and flexibility for text output.
See D8960 for more information, details, and justification.
Differential Revision: https://developer.blender.org/D8960
Reviewed by Campbell Barton
|
|
|
|
Move most of the gizmo snap and placement code to `view_cursor_snap.c`.
Simplify and extend the snap API.
Differential Revision: https://developer.blender.org/D12868
|
|
Move runtime parameters out of context creation.
Not being able to choose another region and v3d limits the use of the
snap API.
|
|
Support axis constraints for the measure tool.
Press X, Y or Z to restrict the dimension to that axis,
it's also possible to toggle between orientations matching transform.
Reviewed By: campbellbarton
Ref D10872
|
|
Also hyphenate 'mouse-move' use doxy sections in render_update.c &
move function comment from the header to the source.
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
Now the operators work like other areas of Blender using the list of selected objects.
Also, the name has been changed to:
```Layers:
- Copy Layer to Selected
- Copy All Layers to Selected
Materials:
- Copy Material to Selected
- Copy All Materials to Selected```
Reviewed By: mendio, pablovazquez, pepeland
Differential Revision: https://developer.blender.org/D11216
|
|
For Measure tool, it is more useful to snap to what is really visible.
So use the cage instead of the geometry that may be hidden with Bmesh.
|
|
This allows the addition of the `SNAP_GEOM_CAGE` option.
Currently unused.
|
|
The non-enabled gizmo was overwriting the projected coordinate value.
|
|
No functional changes.
This makes the `ED_gizmotypes_snap_3d_update` function more specialized.
|
|
|
|
- Remove ternary operators when both values are the same.
- Remove break after return.
- Remove redundant NULL checks for code which handles
those cases immediately beforehand.
|
|
Now the gizmo is drawn only when the eventstate located in
`wm->winactive->eventstate` has not changed.
So it doesn't matter if it's "selected" or not.
This commit also removes the use of the private header "wm.h"
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D9539
|
|
Corrects incorrect usages of the words 'then' and 'than'.
Differential Revision: https://developer.blender.org/D9246
Reviewed by Campbell Barton
|
|
This commit renames the functions in "BKE_unit.h` to be consistent
with the naming in the rest of blenkernel.
bUnit_AsString -> BKE_unit_value_as_string_adaptive
bUnit_AsString2 -> BKE_unit_value_as_string
bUnit_ReplaceString -> BKE_unit_replace_string
bUnit_ApplyPreferredUnit -> BKE_unit_apply_preferred_unit
bUnit_ToUnitAltName -> BKE_unit_name_to_alt
bUnit_ClosestScalar -> BKE_unit_closest_scalar
bUnit_BaseScalar -> BKE_unit_base_scalar
bUnit_IsValid -> BKE_unit_is_valid
bUnit_GetSystem -> BKE_unit_system_get
bUnit_GetBaseUnit -> BKE_unit_base_get
bUnit_GetBaseUnitOfType -> BKE_unit_base_of_type_get
bUnit_GetName -> BKE_unit_name_get
bUnit_GetNameDisplay -> BKE_unit_display_name_get
bUnit_GetIdentifier -> BKE_unit_identifier_get
bUnit_GetScaler -> BKE_unit_scalar_get
bUnit_IsSuppressed -> BKE_unit_is_suppressed
Differential Revision: https://developer.blender.org/D8828
|
|
We now use GPU_blend for enabling / disabling blending and explicitly
set the blend equation.
|
|
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/space_view3d` module.
No functional changes.
|
|
|
|
ED_gizmotypes_snap_3d_context_get could have returned NULL,
rename _get(..) to _ensure(..) and initialize the snap context
in this function.
|
|
The snap point can now be viewed when activating the tool.
|
|
The solution is to distribute the drawing for part to be done in 3d
(dashed lines, arc) and another part in 2d (text and caps).
Ref T72121
Reviewed By: fclem
Maniphest Tasks: T72121
Differential Revision: https://developer.blender.org/D6361
|
|
Follow up of b2ee1770d4c3 and 10c2254d412d, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
|
|
Was hard coded to white making white backgrounds impractical.
D7162 by @billreynish with edits.
|
|
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
|
|
Currently, this change does not bring functional changes.
But it is necessary to extend the use of the snap system for gizmos,
since, after a Undo, the `depsgraph` pointed by the `snap_context`
has its memory invalidated.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D7013
|
|
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
|
|
NOTE: This change shouldn't have any visible effect. It's just the
first (easiest) step towards decoupling gizmo redraws from viewport
redraws.
We currently redraw the entire region whenever a gizmo needs redrawing,
which would be nice to avoid in the future, see T73198. The first step
towards this would be having a separate tag for them, which is what
this patch implements.
The term "editor-overlays" was chosen because for the forseeable future,
we'll also have to redraw non-gizmo overlays in-between drawing 3D and
2D gizmos. Namely annotations.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6838
|
|
D6129 by @smramsay
|
|
Proposed fix for T70141.
Before, the ruler was using the name of the layer as key, but this is very weak because if the layer name changes, the layer gets an annotation layer.
Now, the layer is marked using a flag and now it's possible to rename it.
Reviewed By: dfelinto
Differential Revision: https://developer.blender.org/D6028
|
|
There was a mix of old and new constants. Now have one list of WM_CURSOR_*
cursor types, using GHOST standard cursors when available and otherwise falling
back to our custom cursors.
Ref D5197
|
|
|
|
Part of T66420
Option for snapping to the nearest point of a reference coordinate.
The patch also adds Edge Center and Perpendicular snaps to the ruler.
{F7675906}
Reviewers: campbellbarton, brecht
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D5543
|
|
This change ensures that operators which needs access to evaluated data
first makes sure there is a dependency graph.
Other accesses to the dependency graph made it more explicit about
whether they just need a valid dependency graph pointer or whether they
expect the graph to be already evaluated.
This replaces OPTYPE_USE_EVAL_DATA which is now removed.
Some general rules about usage of accessors:
- Drawing is expected to happen from a fully evaluated dependency graph.
There is now a function to access it, which will in the future control
that dependency graph is actually evaluated.
This check is not yet done because there are some things to be taken
care about first: for example, post-update hooks might leave scene in
a state where something is still tagged for update.
- All operators which needs to access evaluated state must use
CTX_data_ensure_evaluated_depsgraph().
This function replaces OPTYPE_USE_EVAL_DATA.
The call is generally to be done in the very beginning of the
operator, prior other logic (unless this is some comprehensive
operator which might or might not need access to an evaluated state).
This call is never to be used from a loop.
If some utility function requires evaluated state of dependency graph
the graph is to be passed as an explicit argument. This way it is
clear that no evaluation happens in a loop or something like this.
- All cases which needs to know dependency graph pointer, but which
doesn't want to actually evaluate it can use old-style function
CTX_data_depsgraph_pointer(), assuming that underlying code will
ensure dependency graph is evaluated prior to accessing it.
- The new functions are replacing OPTYPE_USE_EVAL_DATA, so now it is
explicit and local about where dependency graph is being ensured.
This commit also contains some fixes of wrong usage of evaluation
functions on original objects. Ideally should be split out, but in
reality with all the APIs being renamed is quite tricky.
Fixes T67454: Blender crash on rapid undo and select
Speculation here is that sometimes undo and selection operators are
sometimes handled in the same event loop iteration, which leaves
non-evaluated dependency graph.
Fixes T67973: Crash on Fix Deforms operator
Fixes T67902: Crash when undo a loop cut
Reviewers: brecht
Reviewed By: brecht
Subscribers: lichtwerk
Maniphest Tasks: T67454
Differential Revision: https://developer.blender.org/D5343
|
|
|
|
The dash_factor wasn't being set in many places, having the graph editor
open for eg, caused box-select in the 3D view not to show dashes.
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
This commit adds support for drawing Dots strokes with a gradient factor to get artistic effects like watercolor.
Currently, the option is only supported by Dots materials, and in the future will be added to line strokes, but now there is a limitation on drawing engine and we will keep disabled on Line materials.
Also, added the option to align Dots and Boxes strokes textures aligned with the drawing path to get more fluid strokes.
|
