Age | Commit message (Collapse) | Author |
|
Use `verts` instead of `vertices` and `polys` instead of `polygons`
in the API added in 05952aa94d33eeb50. This aligns better with
existing naming where the shorter names are much more common.
|
|
For copy-on-write, we want to share attribute arrays between meshes
where possible. Mutable pointers like `Mesh.mvert` make that difficult
by making ownership vague. They also make code more complex by adding
redundancy.
The simplest solution is just removing them and retrieving layers from
`CustomData` as needed. Similar changes have already been applied to
curves and point clouds (e9f82d3dc7ee, 410a6efb747f). Removing use of
the pointers generally makes code more obvious and more reusable.
Mesh data is now accessed with a C++ API (`Mesh::edges()` or
`Mesh::edges_for_write()`), and a C API (`BKE_mesh_edges(mesh)`).
The CoW changes this commit makes possible are described in T95845
and T95842, and started in D14139 and D14140. The change also simplifies
the ongoing mesh struct-of-array refactors from T95965.
**RNA/Python Access Performance**
Theoretically, accessing mesh elements with the RNA API may become
slower, since the layer needs to be found on every random access.
However, overhead is already high enough that this doesn't make a
noticible differenc, and performance is actually improved in some
cases. Random access can be up to 10% faster, but other situations
might be a bit slower. Generally using `foreach_get/set` are the best
way to improve performance. See the differential revision for more
discussion about Python performance.
Cycles has been updated to use raw pointers and the internal Blender
mesh types, mostly because there is no sense in having this overhead
when it's already compiled with Blender. In my tests this roughly
halves the Cycles mesh creation time (0.19s to 0.10s for a 1 million
face grid).
Differential Revision: https://developer.blender.org/D15488
|
|
This commit moves the hide status of mesh vertices, edges, and faces
from the `ME_FLAG` to optional generic boolean attributes. Storing this
data as generic attributes can significantly simplify and improve code,
as described in T95965.
The attributes are called `.hide_vert`, `.hide_edge`, and `.hide_poly`,
using the attribute name semantics discussed in T97452. The `.` prefix
means they are "UI attributes", so they still contain original data
edited by users, but they aren't meant to be accessed procedurally by
the user in arbitrary situations. They are also be hidden in the
spreadsheet and the attribute list by default,
Until 4.0, the attributes are still written to and read from the mesh
in the old way, so neither forward nor backward compatibility are
affected. This means memory requirements will be increased by one byte
per element when the hide status is used. When the flags are removed
completely, requirements will decrease when hiding is unused.
Further notes:
* Some code can be further simplified to skip some processing when the
hide attributes don't exist.
* The data is still stored in flags for `BMesh`, necessitating some
complexity in the conversion to and from `Mesh`.
* Access to the "hide" property of mesh elements in RNA is slower.
The separate boolean arrays should be used where possible.
Ref T95965
Differential Revision: https://developer.blender.org/D14685
|
|
|
|
Continuing the refactors described in T93602, this commit moves
the face dot tag set by the subdivision surface modifier out of
`MVert` to `MeshRuntime`. This clarifies its status as runtime data
and allows further refactoring of mesh positions in the future.
Before, `BKE_modifiers_uses_subsurf_facedots` was used to check
whether subsurf face dots should be drawn, but now we can just check
if the tags exist on the mesh. Modifiers that create new new geometry
or modify topology will already remove the array by clearing mesh
runtime data.
Differential Revision: https://developer.blender.org/D14680
|
|
|
|
When X-ray mode is active the selection is done using the mesh data to
select what is closest to the cursor. When GPU subdivision is active with
the "show on cage" modifier option, this fails as the mesh used for selection
is the unsubdivided one.
This creates a subdivision wrapper before running the selection routines to
ensure that subdivision is available on the CPU side as well.
Differential Revision: https://developer.blender.org/D14188
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
As described in T91186, this commit moves mesh vertex normals into a
contiguous array of float vectors in a custom data layer, how face
normals are currently stored.
The main interface is documented in `BKE_mesh.h`. Vertex and face
normals are now calculated on-demand and cached, retrieved with an
"ensure" function. Since the logical state of a mesh is now "has
normals when necessary", they can be retrieved from a `const` mesh.
The goal is to use on-demand calculation for all derived data, but
leave room for eager calculation for performance purposes (modifier
evaluation is threaded, but viewport data generation is not).
**Benefits**
This moves us closer to a SoA approach rather than the current AoS
paradigm. Accessing a contiguous `float3` is much more efficient than
retrieving data from a larger struct. The memory requirements for
accessing only normals or vertex locations are smaller, and at the
cost of more memory usage for just normals, they now don't have to
be converted between float and short, which also simplifies code
In the future, the remaining items can be removed from `MVert`,
leaving only `float3`, which has similar benefits (see T93602).
Removing the combination of derived and original data makes it
conceptually simpler to only calculate normals when necessary.
This is especially important now that we have more opportunities
for temporary meshes in geometry nodes.
**Performance**
In addition to the theoretical future performance improvements by
making `MVert == float3`, I've done some basic performance testing
on this patch directly. The data is fairly rough, but it gives an idea
about where things stand generally.
- Mesh line primitive 4m Verts: 1.16x faster (36 -> 31 ms),
showing that accessing just `MVert` is now more efficient.
- Spring Splash Screen: 1.03-1.06 -> 1.06-1.11 FPS, a very slight
change that at least shows there is no regression.
- Sprite Fright Snail Smoosh: 3.30-3.40 -> 3.42-3.50 FPS, a small
but observable speedup.
- Set Position Node with Scaled Normal: 1.36x faster (53 -> 39 ms),
shows that using normals in geometry nodes is faster.
- Normal Calculation 1.6m Vert Cube: 1.19x faster (25 -> 21 ms),
shows that calculating normals is slightly faster now.
- File Size of 1.6m Vert Cube: 1.03x smaller (214.7 -> 208.4 MB),
Normals are not saved in files, which can help with large meshes.
As for memory usage, it may be slightly more in some cases, but
I didn't observe any difference in the production files I tested.
**Tests**
Some modifiers and cycles test results need to be updated with this
commit, for two reasons:
- The subdivision surface modifier is not responsible for calculating
normals anymore. In master, the modifier creates different normals
than the result of the `Mesh` normal calculation, so this is a bug
fix.
- There are small differences in the results of some modifiers that
use normals because they are not converted to and from `short`
anymore.
**Future improvements**
- Remove `ModifierTypeInfo::dependsOnNormals`. Code in each modifier
already retrieves normals if they are needed anyway.
- Copy normals as part of a better CoW system for attributes.
- Make more areas use lazy instead of eager normal calculation.
- Remove `BKE_mesh_normals_tag_dirty` in more places since that is
now the default state of a new mesh.
- Possibly apply a similar change to derived face corner normals.
Differential Revision: https://developer.blender.org/D12770
|
|
Ref T92709
|
|
turned on
The core problem is that the geometry nodes modifier sometimes support
"mapping" (i.e. it remembers which new vertices correspond to edit mode
vertices) and sometimes it does not, depending on what the nodes are doing.
Also see rB07ce9910f7cc.
The solution here is that the fallback case in `BKE_mesh_foreach_mapped_edge`
does not call the callback with "invalid" indices.
Differential Revision: https://developer.blender.org/D12007
|
|
|
|
Move far plane last since it's the least likely to intersect edges.
|
|
Apply the same fix for T32214 (edge-select failing) to bones
which also failed when their end-points were outside of the view.
- Add V3D_PROJ_TEST_CLIP_CONTENT support for edit & pose bone iterator
and use for selection operators.
- Remove unnecessarily complicated checks with pose-mode lasso tagging.
- Correct error in pose-mode LassoSelectUserData.is_changed
(currently harmless as it's not read back).
|
|
|
|
Consistently use a/b instead of 0/1.
|
|
This resolves a long standing bug in edge selection
(picking, circle, box & lasso).
Now when one of the edges vertices fails to project into screen space,
the edge is clipped by the viewport to calculate an on-screen location
that can be used instead.
This isn't default as it may be important for the on the screen location
not to be clipped by the viewport.
|
|
|
|
|
|
When editing a complex curve is very annoying to have all handles at a time. Also, this is a requirement for the current GSoC Edit Grease Pencil using curves.
I have seen that this improvement can be used in any other area of blender, so I have decided to publish the option in the overlay panel..
Reviewed By: fclem, #user_interface, billreynish, Severin
Differential Revision: https://developer.blender.org/D7754
|
|
|
|
Lasso, circle, box select fails in weight paint mode with modifiers.
|
|
|
|
|
|
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
|
|
|
|
|
|
Previously in 2.79 we were using a specialized drawing using derivedMesh.
Now the subsurf modifier tag each center vertex as facedot and let the
DRWManager pick it up.
Some modifiers (deforming ones) do not clear the tag so we can use this
technique even if there is deforming modifiers after subsurf modifiers.
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
Use doxy references to function and enums,
also correct some names which became out of sync.
|
|
We already have different storages for cddata of verts, edges etc.,
'simply' do the same for the mask flags we use all around Blender code
to request some data, or limit some operation to some layers, etc.
Reason we need this is that some cddata types (like Normals) are
actually shared between verts/polys/loops, and we don’t want to generate
clnors everytime we request vnors!
As a side note, this also does final fix to T59338, which was the
trigger for this patch (need to request computed loop normals for
another mesh than evaluated one).
Reviewers: brecht, campbellbarton, sergey
Differential Revision: https://developer.blender.org/D4407
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
|
|
|
|
|
|
|
|
DerivedMesh is now removed from edit-mesh modifier evaluation.
|
|
This commit add one regression: it is impossible to currently hide handles
in the viewport. But this should be fixed in another commit.
|
|
Also, fix missing cleanup of Object.runtime when copying Object
datablocks!
|
|
The function definitions still reside in DerivedMesh.c. Once we're done
porting all the DerivedMesh use to Mesh, we'll move the still-relevant
functions to mesh_runtime.c. This move is now cumbersome due to shared
statically-declared utility functions in DerivedMesh.c
|
|
These needed to be using the COW evaluated data, instead of the raw bone
positions.
All other datatypes still need converting to work with this though.
|
|
The depsgraph was always created within a fixed evaluation context. Passing
both risks the depsgraph and evaluation context not matching, and it
complicates the Python API where we'd have to expose both which is not so
easy to understand.
This also removes the global evaluation context in main, which assumed there
to be a single active scene and view layer.
Differential Revision: https://developer.blender.org/D3152
|
|
2.8x branch added bContext arg in many places,
pass eval-context instead since its not simple to reason about what
what nested functions do when they can access and change almost anything.
Also use const to prevent unexpected modifications.
This fixes crash loading files with shadows,
since off-screen buffers use a NULL context for rendering.
|
|
Note that some little parts of code have been dissabled because eval_ctx
was not available there. This should be resolved once DerivedMesh is
replaced.
|
|
|
|
Opted to keep includes if they are used indirectly (even if removing is possible).
|
|
|