| Age | Commit message (Collapse) | Author |
|---|
|
* added new twist method - "Tangent", suggested by Martin.
the nice thing about this is its stable no matter how you rotate the data, rotation is local to each segment.
* added smooth option that smooths the twisting (before applying user twist), to workaround Z-Up and Tangent's ugly curve twisting. Id prefer not to have this however it makes tangent much nicer. Possibly tangent can be improved some other way and this can be removed.
A smooth value of 1.0 will iterate over and smooth the twisting by the resolution value of the spline.
* Minimum-Twist method now corrects for cyclic twist by taking the roll difference between first and last, then increasingly counter rotate each segment over the entire curve. Previously it calculated from both directions and blended them.
details
* BevPoints use quats rather then 3x3 matrix.
* added BevPoint direction "dir" and tangent "tan" used only for 3D curves.
* don't calculate BevPoint->cosa, BevPoint->sina for 3D curves.
* split bevel tilt calculation into functions.
* nurbs curves currently don't generate tangents and wont work with tangent twist method.
* some of the use of quats should be optimized.
* smoothing is not animation safe, the higher the smoothing the higher the likelyhood of flipping.
|
|
* Made transform work better with axis-angle
* Corrected the rotation-type handling code in a few places
|
|
|
|
- Hair dynamics have their own panel in particle settings with the settings from cloth panel that apply to hair.
- Basic internal friction force to quickly emulate self collisions and volume preservation. (Still very early code, but gives some idea of what's possible).
- Softbody simulation is no longer used for hair.
* Old files with sb dynamics should just load the hair without dynamics so new dynamics can be applied.
* Invasion of particles exceptions in sb code is finally over.
- Collisions with other objects are disabled for now and will be worked out in the future.
Other changes/fixes:
- Particle mode editing flag wasn't saved properly.
- Some old files with edited hair didn't load correctly.
- Disabled delete & specials menu in particle mode for non-hair editing.
- Fixed yet one more cloth & softbody pointcache update issue.
- Disconnect/connect hair now uses only the deformed mesh so it works correctly also for subsurfed emitters.
- Hair editing now updates correctly with a moving emitter.
|
|
* Enable cache for high res + new preview
* Bugfix for smoke banding (in cooperation with N_T)
Hint: Work-in-progress regarding collision objects so can be broken, didn't test
Hint2: jahka enabled a general particle panel but
* bake button doesn't work
* step is not supported for cloth
* several other things there ;)
|
|
* Split object_edit.c into multiple files:
object_add.c, object_edit.c, object_hook.c, object_relations.c,
object_select.c, object_transform.c.
* Rename files to have consistent object_ and mball_ prefix:
object_shapekey.c, object_lattice.c, object_vgroup.c, mball_edit.c.
* Added operators:
* vertex group menu and set active
* apply location, rotation, scale, visual transform (location is new)
* make local
* make vertex parent
* move to layer
* convert to curve/mesh (not finished yet)
* Many small fixes for marked issues, but still much code to be cleaned
up here...
|
|
- rename "Nurb" to "Spline" in RNA, eg. bpy.data.curves[0].splines[2].type == 'NURBS'
from a user perspective spline is a more generic term while Nurb is misleading when used for beziers and poly lines.
- added curve.active_spline property so the python UI can display the last selected curve.
- set the active spline when entering editmode (uses first selected spline)
- added back Hide Handles as a curve property (removed the global flag), access from the view panel in editmode.
- added hide normal option for curve, normal size access for curve and mesh display.
- changing orderU/V, endpoints, cyclic, bezierU/V now work in editmode and calls update functions.
- entering editmode was crashing with text objects
- curve.switch_direction() crashed (own fault from last commit)
- Tkey for tilt was overridden by Toolbar, made Tilt Ctrl+T.
- OBJECT_OT_mode_set check for compatible modes before running - so curves dont try go into paint mode with V key for eg.
|
|
This commit some of the many bugs here (it's still not perfect now, but much better than it was):
* Moving in/out of Object, Edit, and Pose Modes for Armatures should now work smoothly. Operators should work nicely in the appropriate modes now (select linked might be a bit tempermental still, since it uses mouse-position).
* Fixed the 'mysterious' memory leaks when changing modes. These were only caused when using the mode switching menu in the 3D-View.
* Went through bullet-proofing some of the operator calling functions against NULL operator id-name strings.
|
|
moved CU_2D to Nurb->flag in do_versions
This made simple type checks confusing to read.
many... if( (nu->type & 7)==CU_BEZIER)
replaced with ... if(nu->type == CU_BEZIER)
made setting rna curve_2d clamp the Z values. still more RNA/UI changes to do.
|
|
* Added missing prototype from arithb
* Added define for Axis-Angle rotations. This has not yet been hooked up for actual usage yet, since there are some issues regarding evaluation which I'd like to investigate further first.
* Editing numbuttons for posechannel transforms now updates in realtime. Sending ND_POSE|ND_TRANSFORM was causing confusion for the listeners (which only check for either/or)
* Partial fix for axis drawing on bones. Now the axes are drawn at the tips of the bones again, but unfortunately the texts aren't (since they only use the object matrix, they get drawn at the origin).
|
|
|
|
replacements...
MTC_cross3Float -> Crossf
MTC_diff3Float -> VecSubf
MTC_dot3Float -> Inpf
MTC_Mat3CpyMat4 -> Mat3CpyMat4
MTC_Mat3MulVecd -> Mat3MulVecd
MTC_Mat3MulVecfl -> Mat3MulVecfl
MTC_Mat4CpyMat4 -> Mat4CpyMat4
MTC_Mat4Invert -> Mat4Invert
MTC_Mat4Mul3Vecfl -> Mat4Mul3Vecfl
MTC_Mat4MulMat4 -> Mat4MulMat4
MTC_Mat4MulSerie -> Mat4MulSerie
MTC_Mat4MulVec4fl -> Mat4MulVec4fl
MTC_Mat4MulVecfl -> Mat4MulVecfl
MTC_Mat4One -> Mat4One
MTC_Mat4Ortho -> Mat4Ortho
MTC_Mat4SwapMat4 -> Mat4SwapMat4
|
|
- Moves hair from face-space to global space and back.
- Allows for editing of emitter mesh after hair combing.
- Disconnect hair before doing topology changing changes in mesh edit mode, connect after changes.
- Notes:
* The closest location on emitter surface to the hair root is used to connect the hair.
* Emitter deflection, sticky roots and add brush don't apply for disconnect hair in particle mode.
- Todo for future:
* Copy disconnected hair from object to another (when 2.5 has proper copy operators again).
* Possible automatic disconnect/connect with topology changing operations in mesh edit mode.
Other changes/fixes:
- Proper subtypes for some particle mode notifiers.
- Particle mode selections didn't draw correctly because of using lighting for the paths.
|
|
- Some big refresh issues with softbody & cloth point cache usage should now be fixed.
- Removed sticky objects from particles (better stuff will come back when I get to updating reactor particles).
- Some initial easy memory efficiency cleanup for ParticleData struct. The ultimate goal is to get particles less memory hungry -> more particles possible in single scene.
- Wrong path timing clamping caused hair particles to seem disappeared when changing between normal<->hair particles.
- "Calculate to current frame" in cache buttons baked instead of the intended function.
- Boids particle data is now a bit better organized.
|
|
Notifiers
---------
Various fixes for wrong use of notifiers, and some new notifiers
to make things a bit more clear and consistent, with two notable
changes:
* Geometry changes are now done with NC_GEOM, rather than
NC_OBJECT|ND_GEOM_, so an object does need to be available.
* Space data now use NC_SPACE|ND_SPACE_*, instead of data
notifiers or even NC_WINDOW in some cases. Note that NC_SPACE
should only be used for notifying about changes in space data,
we don't want to go back to allqueue(REDRAW..).
Depsgraph
---------
The dependency graph now has a different flush call:
DAG_object_flush_update(scene, ob, flag)
is replaced by:
DAG_id_flush_update(id, flag)
It still works basically the same, one difference is that it now
also accepts object data (e.g. Mesh), again to avoid requiring an
Object to be available. Other ID types will simply do nothing at
the moment.
Docs
----
I made some guidelines for how/when to do which kinds of updates
and notifiers. I can't specify totally exact how to make these
decisions, but these are basically the guidelines I use. So, new
and updated docs are here:
http://wiki.blender.org/index.php/BlenderDev/Blender2.5/NotifiersUpdates
http://wiki.blender.org/index.php/BlenderDev/Blender2.5/DataNotifiers
|
|
|
|
ignore_deprecation_warnings etc work again.
space_set_commmandline_options from space.c as game_set_commmandline_options
|
|
* All tools where rotation order matters for armature bones have now been adjusted to use the new code
* Transform now uses the new code for bones too. However, there are some jumping issues here that I'm not too sure how to solve yet. Help fixing this is welcome.
|
|
Background picture used bad scissor/viewport code, causing bad drawing
on tool region.
|
|
* Disabled temporary debugging prints, since event handling now seems stable
* Modified the initgrabz() code so that when the cursor is behind the viewplane, the z-factor is calculated as if the cursor was on the other side of the view plane. This seems to work well, and doesn't seem to have any negative side-effects (yet).
|
|
* Grease Pencil works again from Image Editor now. For now, the GPencil datablock is linked to the Image Editor space, but this can be changed if need be.
* Made Grease Pencil hotkeys into a separate Grease Pencil keymap, which can get included automagically like for frames/ui/v2d/etc. by supplying ED_KEYMAP_GPENCIL as part of st->keymapflag
* Temporarily restored the nasty hack to make View2D-aligned sketches in Image Editor to use OpenGL lines only. I still dunno why this doesn't work normally.
(Probably related is that strokes are not visible when there's no image visible atm).
|
|
- Baked point caches for particles, cloth and softbody can now be edited in particle mode.
* This overwrites the old cloth/sb cache editmode editing.
* The type of editable system is chosen from a menu.
* For particles the current particle system and it's current cache are used.
- Currently this only works for caches that are in memory, but some automatic conversion from disk to memory and back can be implemented later.
- All tools from hair editing can't be applied to point caches and are hidden in the tool panel and specials menu. Some functionality like subdividing paths can be later implemented in a slightly different way from how it works for hair.
- Code is not yet optimized for speed, so editing might be slow sometimes.
Known issues:
- Cloth doesn't update properly while in particle mode, due to the way cloth modifier currently works. Daniel can you check on this?
- As "particle mode" is not only for particles any more some other name would be in place?
- Better icons are needed for the path, point, and tip-modes as the current icons from mesh edit mode are quite misleading.
- Direct editing of point velocities is not yet implemented, but will be in the future.
Other changes:
- Hair editing doesn't require a "make editable" button press any more.
- Multiple caches in single particle system disables changing emission properties.
- Unified ui code for all point cache panels.
* Defined in buttons_particle.py and imported for cloth, smoke & softbody.
- Proper disabling of properties in ui after baking point caches. (Daniel could you please make needed disable code for smoke panels as their functionality is not familiar to me.)
- Hair weight brush has been removed. Once hair dynamics is re-implemented I'll code a more useable alternative to the functionality.
Bug fixes:
- Unlinking particle settings crashed.
- Deleting the active object with particles in the scene crashed.
- Softbody didn't write point caches correctly on save.
|
|
Restored the UI for access to the GP layers.
There are still a few minor bugs here:
* Wrong icons on the toggles - even when they're enabled, they only show a single state
* The ID-template doesn't seem to be showing up. Dunno what's going wrong there...
|
|
* When starting Grease Pencil from the toolbar, strokes are now started only when a click-drag begins.
* Made the 'straight-lines' option an RNA property for the operator
* Added an exec() callback and relevant stroke-collection stuff so that interactive redo/changing settings can work.
WARNING: this is highly unstable here - keeps crashing though I cannot determine the cause yet.
|
|
- Pkey only starts in BGE in Object Mode
- warning in readblenentry.c, is silent on 64bit too.
|
|
* Realtime updates now work again
* Fixed problems with clicks to start drawing resulting in a stroke being ended.
* Changed the hotkeys to Ctrl-Alt-Shift-LMB (draw) and Ctrl-Alt-Shift-RMB (erase). Still very temporary stuff, will probably change these a few more times as I experiment with new approaches.
|
|
This commit is the start of the new Grease Pencil implementation. I've just ported the old code to make it work with operators, and to store its data in Grease-Pencil datablocks.
However, this is currently still really buggy, with only the barebones of the drawing/creation tools restored (no UI panels, no options). To use (not recommended), use D+S+move_mouse (and click when finished) for now. There are some rather serious event handling errors going on here...
|
|
We don't want this to flip around when people change left or right mouse select.
|
|
Also, made the Outliner's horizontal scrollbar work better for keymaps view. It's still using an approximation of the width, but at least you can scroll now.
|
|
*Bugfix for crash on using a plane as smoke domain (reported by DingTo)
* Bringing slowly high res back, not yet working
|
|
* Deleting high res modifier again
* fixing smoke + continue physics drawing
* fixing cache reset when changing dissolve
|
|
*introducing unique ID's following brechts hint from ML
Enhancements resulting from this:
* multiple caches per modifier stack position
|
|
*enable non-2^n textrues for all gfx cards which support it.
* try to enhance the visual quality under linux a bit when gfx card doesn't support it (still errors visible)
|
|
* Bugfix for scaling on non-2^n-textures
|
|
Patch by Lorenzo Pierfederici (lento). Many thanks!
* Ported some more menus to python (Pose, Particle...)
* Some cleanup and reorganization in the python file to reduce code. :)
* Cleanup of old C buttons code.
|
|
Moved WeightPaint/VertexPaint toggling hotkeys to the same place that the ones for PoseMode/EditMode are defined. This means that the hotkey for toggling PoseMode works again (instead of being overwritten by WeightPaint).
|
|
* Added operator for filling vertex colors with the brush color
* Pythonized the vertex paint menu
|
|
* Made object mode an enum, shows better in the debugger
* Added a toggle mode to the set object mode operator
* Toggling a mode on and off goes back to the previous mode, not just object mode
* Changed the vertex mode and weight mode shortcuts to call the toggle mode operator
|
|
when passing properties=True as argument.
Other changes:
* uiItemR, uiItemFullR, uiItemFullO now accept a flag argument rather
than multiple different "boolean" arguments, but still exposed as
booleans to python.
* Fix RNA to support setting PROP_RNAPTR for return values.
|
|
comment added)
|
|
* Alt-S in Object Mode would crash. Was caused by modal-keymaps for Pose Mode not being cleared when not in Pose Mode.
Also fixed what appears to have been a copy+paste error for Armature Sketching keymaps.
* Active KeyingSet menu in TimeLine header is now properly editable. Was using the wrong type of layout call to do this.
|
|
* Popup menus now remember the last clicked item again.
* Modifier and File Format menus are now organized in multiple
columns with categories.
* Hook, explode, uv project modifiers have all their buttons
again with the relevant operators implemented.
* Modifiers that can't be added by the user, or don't work on
curves for example, are not in the menu anymore.
* Fix search menu overlapping buttons when near the bottom of
the screen.
* Fix uv layers search menu not working in some modifiers.
* Cleanup popup menu code a bit, layout engine is used in more
cases now instead of ugly position calculation code.
|
|
Probably missing because is not inside view3d_home, it's in the main
winqreadview3dspace function.
|
|
* Evil backbuf drawing strikes again. In paint modes, it was causing the tool panel to flash black, bad glScissor.
|
|
* Fix for OpenGL domain scaling/rotating/translating reported by Wahooney
|
|
* Fixing my fix for opengl GL_BLEND
|
|
* Fix OpenGL drawing resulting (at least on windows) in missing panels when switching fullscreen + back
|
|
* cache for low res (deactivating high res for now)
* new way of view3d rendering of smoke (no longer 3 axes) -using 3dtexture now (introduced into gpu/intern)
* introducing LZO and LZMA libs into extern (makefiles missing for now)
* reducing memory usage after simulating for the frame ended (freeing temporary buffers)
* splitting smoke into 2 modifier for the cache-sake (it cannot handle more than 1 cache on the same modifier-index)
* no color on gui anymore
* fixing non-power-of-2 resolutions (hopefully)
* fixing select-deselect of domain drawing bug
* fixing drawobject.c coding style (making Ton happy) ;-)
HINT #1: If scons doesn't work -> cmakefiles are up-to-date, couldn't test scons (but i tried to mantain them, too)
CODERS HINT #1: we really need a way to disable adding all modifiers through "Add Modifiers" dropdown!
WARNING #1: before applying this commit, deactivate your SMOKE DOMAIN in your old files and save them then. You can open them then savely after that.
WARNING #2: File and cache format of smoke can be changed, this is not final!
|
|
* Some initial work on a new paint abstraction, PaintStroke. For now, most of the code just pulls out stroke-related stuff from sculpt mode, next step is to integrate the other paint modes to use this. It'll enable stuff like smooth stroke for all the paint modes with less code duplication.
|
|
* Fix header menu spacing bug, and make it consistent for all headers.
* For consistency, always put menus first in the header, then any enums
to switch the type of data displayed.
* Node editor header ported to python layout. Still quite a few
operators missing to make the menus complete.
* RNA wrapped node editor, and added use_nodes property to material
and scene.
|
