| Age | Commit message (Collapse) | Author |
|---|
|
Instead of duplicating logic many times.
|
|
There were two bugs, a regression in [0] and the object-data wasn't
tagged for depsgraph updating.
[0]: 19df0e3cfd5b9fed891ed81dd1123b2351605a7d
|
|
Followup to the previous commit, to display a pin icon in the scene switcher.
This is a good indicator to have and such workspace-wide functionality should
be available in the topbar, close to what it belongs to (scene switching).
Downside is that it makes this already crowded region even more crowded. But
thanks to the use of superimposed icons, it's not too noisy visually.
Differential Revision: https://developer.blender.org/D11890
Reviewed by: Campbell Barton
|
|
Removes the following macros for scene/render frame values:
- `CFRA`
- `SUBFRA`
- `SFRA`
- `EFRA`
These macros don't add much, other than saving a few characters when typing.
It's not immediately clear what they refer to, they just hide what they
actually access. Just be explicit and clear about that.
Plus these macros gave read and write access to the variables, so eyesores like
this would be done (eyesore because it looks like assigning to a constant):
```
CFRA = some_frame_nbr;
```
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D15311
|
|
This commit adds a new face nearest snapping mode, adds new snapping
options, and (lightly) refactors code around snapping.
The new face nearest snapping mode will snap transformed geometry to the
nearest surface in world space. In contrast, the original face snapping
mode uses projection (raycasting) to snap source to target geometry.
Face snapping therefore only works with what is visible, while nearest
face snapping can snap geometry to occluded parts of the scene. This new
mode is critical for retopology work, where some of the target mesh
might be occluded (ex: sliding an edge loop that wraps around the
backside of target mesh).
The nearest face snapping mode has two options: "Snap to Same Target"
and "Face Nearest Steps". When the Snap to Same Object option is
enabled, the selected source geometry will stay near the target that it
is nearest before editing started, which prevents the source geometry
from snapping to other targets. The Face Nearest Steps divides the
overall transformation for each vertex into n smaller transformations,
then applies those n transformations with surface snapping interlacing
each step. This steps option handles transformations that cross U-shaped
targets better.
The new snapping options allow the artist to better control which target
objects (objects to which the edited geometry is snapped) are considered
when snapping. In particular, the only option for filtering target
objects was a "Project onto Self", which allowed the currently edited
mesh to be considered as a target. Now, the artist can choose any
combination of the following to be considered as a target: the active
object, any edited object that isn't active (see note below), any non-
edited object. Additionally, the artist has another snapping option to
exclude objects that are not selectable as potential targets.
The Snapping Options dropdown has been lightly reorganized to allow for
the additional options.
Included in this patch:
- Snap target selection is more controllable for artist with additional
snapping options.
- Renamed a few of the snap-related functions to better reflect what
they actually do now. For example, `applySnapping` implies that this
handles the snapping, while `applyProject` implies something entirely
different is done there. However, better names would be
`applySnappingAsGroup` and `applySnappingIndividual`, respectively,
where `applySnappingIndividual` previously only does Face snapping.
- Added an initial coordinate parameter to snapping functions so that
the nearest target before transforming can be determined(for "Snap to
Same Object"), and so the transformation can be broken into smaller
steps (for "Face Nearest Steps").
- Separated the BVH Tree getter code from mesh/edit mesh to its own
function to reduce code duplication.
- Added icon for nearest face snapping.
- The original "Project onto Self" was actually not correct! This option
should be called "Project onto Active" instead, but that only matters
when editing multiple meshes at the same time. This patch makes this
change in the UI.
Reviewed By: Campbell Barton, Germano Cavalcante
Differential Revision: https://developer.blender.org/D14591
|
|
In perspective mode the snap point direction needs to be taken into
account to define which side of the face is being looked at.
If there is no face under the mouse cursor, there is no direction
adjustment and the element normal will be used.
|
|
|
|
Walk mode implemented it's own grab which relied on WM_cursor_warp
to work (which isn't implemented for wayland).
Resolve this by using WM_cursor_grab_{enable/disable}.
Besides fixing Wayland this removes the need for workarounds:
- Ensure the event received were after the event generated from warping.
- Alternate logic that reset the "center" when using tablets.
- Checking the cursor location was scaled by native-pixels on macOS.
There is a minor change in behavior: on completion the cursor is left
at the location walk-mode began instead of the center of the region.
|
|
|
|
|
|
Now that VR offscreen drawing accounts for object type visibility,
armatures should be displayed when specified.
|
|
into enums
The transformation snapping code contains a bunch of `#define`s, some ambiguously or incorrectly named attributes. This patch contains refactored code to improve this. This patch does (should) not change functionality of snapping.
Clarified ambiguously / incorrectly named attributes.
- "Target" is used to refer to the part of the source that is to be snapped (Active, Median, Center, Closest), but several other areas of Blender use the term "target" to refer to the thing being snapped to and "source" to refer to the thing getting snapped. Moreover, the implications of the previous terms do not match the descriptions. For example: `SCE_SNAP_TARGET_CENTER` does not snap the grabbed geometry to the center of the target, but instead "Snap transforamtion center onto target".
- "Select" refers to the condition for an object to be a possible target for snapping.
- `SCE_SNAP_MODE_FACE` is renamed to `SCE_SNAP_MODE_FACE_RAYCAST` to better describe its affect and to make way for other face snapping methods (ex: nearest).
Refactored related `#define` into `enum`s. In particular, constants relating to...
- `ToolSettings.snap_flag` are now in `enum eSnapFlag`
- `ToolSettings.snap_mode` are now in `enum eSnapMode`
- `ToolSettings.snap_source` (was `snap_target`) are now in `enum eSnapSourceSelect`
- `ToolSettings.snap_flag` (`SCE_SNAP_NO_SELF`) and `TransSnap.target_select` are now in `enum eSnapTargetSelect`
As the terms became more consistent and the constants were packed together into meaningful enumerations, some of the attribute names seemed ambiguous. For example, it is unclear whether `SnapObjectParams.snap_select` referred to the target or the source. This patch also adds a small amount of clarity.
This patch also swaps out generic types (ex: `char`, `short`, `ushort`) and unclear hard coded numbers (ex: `0`) used with snap-related enumerations with the actual `enum`s and values.
Note: I did leave myself some comments to follow-up with further refactoring. Specifically, using "target" and "source" consistently will mean the Python API will need to change (ex: `ToolSettings.snap_target` is not `ToolSettings.snap_source`). If the API is going to change, it would be good to make sure that the used terms are descriptive enough. For example, `bpy.ops.transform.translate` uses a `snap` argument to determine if snapping should be enabled while transforming. Perhaps `use_snap` might be an improvement that's more consistent with other conventions.
This patch is (mostly) a subset of D14591, as suggested by @mano-wii.
Task T69342 proposes to separate the `Absolute Grid Snap` option out from `Increment` snapping method into its own method. Also, there might be reason to create additional snapping methods or options. (Indeed, D14591 heads in this direction). This patch can work along with these suggestions, as this patch is trying to clarify the snapping code and to prompt more work in this area.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D15037
|
|
When this preference is enabled, use selection behavior matching the
graph editor. We may want to make this default (see T98552).
|
|
Mostly duplicate includes, also use nullptr, and using default
member initializers.
|
|
Add support for adding (inserting) new background images into an
override of a linked Camera ID.
Request from the Blender studio.
This ended up being more involved than expected as it uncovered some
latent issues with existing background images code. Noticiably, a new
`BKE_camera_background_image_copy` had to be added to handle copying
of background images in a proper, generic ID-management way.
|
|
Linked ID is (almost) never editable... Also rename that function to add
the `_poll` suffix.
|
|
Assuming that an ID pointer is NULL because another 'source type'
property has some specific value is utterly wrong and a gateway to
usercounting bugs.
|
|
Dropping would pass the name of the ID to drop to the properties of the
drop operator. This would then lookup the ID by name. With linking
and/or library overrides, multiple IDs of the same name and type may
exist, which is why the session UUID should be used instead. All
operators used for dropping support this now and the drop code passes
the session UUID instead of the name.
Also see 917c096be6b9 and 8f79fa9c6780.
Some drop operators were already using the session UUIDs. This converts
the remaining ones. The "name" property is kept working as before, since
some scripts use this.
Side-effect: The "Name" property won't show up in the Adjust Last
Operation anymore, which was the case for some of these operators, and
its value won't be remembered over multiple executions of the operator.
Both were not at all useful from what I can tell, and I doubt this was
done intentionally.
|
|
|
|
8f79fa9c6780 was an attempt to fix this already, but it didn't quite
work. Problem was that the tooltip was messing with the drop-box and
operator properties, setting the name property for its own internal
logic. This name property would then be used rather than the session
UUID to query the material, which gave the wrong material (linking can
result in multiple IDs of the same type with the same name). A followup
commit will further sanitize this.
|
|
|
|
917c096be6b9 applied to objects only, this also applies the same fix for
the general 3D View drop operations, e.g. used for dragging materials,
images, worlds, etc.
This is needed to fix T95706, but apparently something else is still
going on. Needs further investigation.
|
|
The operators to handle object drag and drop (from the asset browser,
outliner, etc.) used the object name to find the object to add and
place. This is problematic with linking and/or library overrides, since
this may lead to multiple objects with the same name. So the wrong
object would be used by the drop operators.
Partially fixes T97320. T95706 probably needs the same fix but for
materials.
As a side-effect, the "Name" button won't show up in the Adjust Last
Operation panel anymore. This isn't really useful, and I doubt this was
ever intentionally exposed in the UI.
|
|
The operators to handle object drag and drop (from the asset browser,
outliner, etc.) used the object name to find the object to add and
place. This is problematic with linking and/or library overrides, since
this may lead to multiple objects with the same name. So the wrong
object would be used by the drop operators.
Partially fixes T97320. T95706 probably needs the same fix but for
materials.
As a side-effect, the "Name" button won't show up in the Adjust Last
Operation panel anymore. This isn't really useful, and I doubt this was
ever intentionally exposed in the UI.
|
|
|
|
|
|
It wasn't possible to temporarily orbit the view, then set back to an
axis-aligned view.
Details:
- It was possible to change RegionView3D.view_rotation while the view
kept the axis alignment value (Top, Left, Front .. etc) which
displayed in the viewport overlay.
Now changing the view rotation directly or via "view_matrix" resets
the axis-alignment - clearing when the view is no longer axis-aligned
or assigning the newly aligned axis.
- RegionView3D.is_orthographic_side_view added in [0] could be assigned
but wasn't useful as it treated an enum as a boolean only setting the
RegionView3D.view to RV3D_VIEW_USER or RV3D_VIEW_FRONT.
Now enabling this aligns the viewport rotation to it's closest
axis-aligned orientation setting RegionView3D.view & view_axis_roll
accordingly. Note that the "orthographic" term is misleading as the
property only relates to axis-alignment, not to the
perspective/orthographic setting. We could consider deprecating the
current naming.
[0]: 63bae864f40302b0a303498d26f230caf4f24339
|
|
View roll checked if the resulting roll was close to a view axis
but didn't write the aligned quaternion back to the final result.
Add ED_view3d_quat_to_axis_view_and_reset_quat since most callers
to ED_view3d_quat_to_axis_view will reset the quaternion when a view
aligned axis is found.
|
|
Headers should only include other headers when absolutely necessary,
to avoid unnecessary dependencies and increasing compile times.
To make this change simpler, three DerivedMesh functions with a single
use were removed.
|
|
|
|
|
|
|
|
|
|
Assign get_name functions for select picking and circle select
so modifier keys show the result of holding the modifiers.
|
|
|
|
Recalc selection count at the end of the circle selection.
This was removed from circle selection as it became a performance
bottleneck, helas some operators rely on it.
|
|
|
|
This should have no functional changes.
This reduce the complexity of the shader by only supporting 2 colors.
We never use more than 2 color in practice and this makes usage not require
a UBO.
|
|
This allows object extras such as image-empties to be shown in the VR
viewport/headset display. Being able to see reference images in VR can
be useful for architectural walkthroughs and 3D modeling applications.
Since users may not want to see all object extras (lights, cameras,
etc.), per-object-type visibility settings are also added as session
options.
By slightly refactoring the definition of the 3D View object types
visibility panel (note: no functional changes), the VR Scene Inspection
add-on can show a similar panel without duplicating code. When VR
selection is possible in the future, the object type select options can
also be enabled.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14220
|
|
|
|
Recent cleanups 9a8669ac81b99b2 and 1c790555a02bfc3
incorrectly interpereted the bitfield width syntax as a default
value. Also resolve two other compilation warnings.
|
|
If the measure gizmo is enabled, its snap state is used in the snap update.
As it does not require a plane, the orientation of the plane is not
calculated.
However, the calculation of the plane's orientation must prevail over
the states.
|
|
Split 'ED_view3d_cursor_snap_data_get' into 'update' and 'get' functions
Sometimes we just want to update and sometimes we just get the result.
Make it clear.
|
|
This patch adds the drag and drop strip previews in the VSE.
It also adds two new functions to the drag and drop API.
1. "draw_in_view" for callbacks that wants to draw elements in local viewport coordinates
2. "on_drag_start" that can be used for prefetching data only once at the start of the drag.
Reviewed By: Julian, Campbell
Differential Revision: http://developer.blender.org/D14560
|
|
View moves faster with two active directions.
This is probably because `dvec` is not normalized when moving in two directions.
Normalizing this direction vector will fix the problem.
Differential Revision: https://developer.blender.org/D14729
|
|
Regression introduced in
{rB721335553ccb5ce4f7a374b958b7d65befa319df}.
`plane_omat` is only computed if `snap_state->draw_plane` is `true`.
|
|
Ref T97444.
Differential Revision: https://developer.blender.org/D14700
|
|
The "PROP" in the name reflects its generic status, and removing
"LOOP" makes sense because it is no longer associated with just
mesh face corners. In general the goal is to remove extra semantic
meaning from the custom data types.
|
|
Continuing the refactors described in T93602, this commit moves
the face dot tag set by the subdivision surface modifier out of
`MVert` to `MeshRuntime`. This clarifies its status as runtime data
and allows further refactoring of mesh positions in the future.
Before, `BKE_modifiers_uses_subsurf_facedots` was used to check
whether subsurf face dots should be drawn, but now we can just check
if the tags exist on the mesh. Modifiers that create new new geometry
or modify topology will already remove the array by clearing mesh
runtime data.
Differential Revision: https://developer.blender.org/D14680
|
|
Unlike regular selection cycling that is activated when clicking again
in the same location, object mode would cycle to another object
if the object that was selected happened to already be active.
This made it impossible to click-drag to tweak the active object
if there were other objects behind it as those would be activated first.
Resolves T96752.
|
