| Age | Commit message (Collapse) | Author |
|---|
|
This ended up being a copy of:
`toolsettings->workspace_tool_type == SCE_WORKSPACE_TOOL_FALLBACK`
requiring boiler plate assignment in gizmos refresh callbacks.
Remove this struct member and check `toolsettings->workspace_tool_type`
directly, since so far there has been no advantage in gizmo-groups
being able to control this themselves.
|
|
|
|
Match API naming prefix (BKE_vfont_*) and DNA_vfont_types.h.
|
|
This is a necessary step for EEVEE's new arch. This moves more data
to the draw manager. This makes it easier to have the render or draw
engines manage their own data.
This makes more sense and cleans-up what the GPUViewport holds
Also rewrites the Texture pool manager to be in C++.
This also move the DefaultFramebuffer/TextureList and the engine related
data to a new `DRWViewData` struct. This struct manages the per view
(as in stereo view) engine data.
There is a bit of cleanup in the way the draw manager is setup.
We now use a temporary DRWData instead of creating a dummy viewport.
Development: fclem, jbakker
Differential Revision: https://developer.blender.org/D11966
|
|
{F10761402}
With active viewport render from camera view, the camera border shows up, even when passepartout and overlays are disabled.
By moving the line-drawing code to the passepartout section, it is effectively disabled when passepartout is off.
Reviewed By: sebastian_k
Differential Revision: https://developer.blender.org/D12745
|
|
Swap the tool-header and header order so the tool-header
so the header is always next to the window edge.
Note that files saved in 3.0 will have overlapping headers when opened
in any version of Blender before this commit.
Reviewed By: Severin, fsiddi
Maniphest Tasks: T91536
Ref D12631
|
|
While World data has always been able to be marked as an asset, there
was no way to actually use them from the asset browser. This change
allows users to drag-drop world assets onto the Viewport and have them
appended/linked to their scene.
Differential Revision: https://developer.blender.org/D12566
|
|
Mistake in own {rB69893ef27c91}.
Was mixing screen on region coordinates.
|
|
|
|
|
|
This adds the ability to cancel out of the roll using ESC or RMB
(which is not common for viewops -- but makes sense in the case of roll
I think). This resets the view as well as potential locked cameras to
the original orientations (but does not remove potential autokeys --
which no transform does on cancel btw.)
Maniphest Tasks: T89883
Differential Revision: https://developer.blender.org/D12582
|
|
Since its introduction in {rB5c569d227b64}, the view roll was based on
horizontal movement only. Using a "real" angle not only feels more
natural but also has the benefit of getting more precission the further
away from the center you are (just like regular rotation, brush/stencil
rotation etc.). A similar thing has already been implemented in the
Grease Pencil Tools Addon, now make the blender standard roll the same.
Since this is not using the transform system, we are still lacking a
line in the viewport (this could be added but since this is always based
on the center of the view we dont necessarily need this), as well as the
additional Shift-extra-precission behavior.
Fixes T89883
Maniphest Tasks: T89883
Differential Revision: https://developer.blender.org/D12582
|
|
|
|
Expose a key-map preference "Fallback Tool (RMB)",
disabled by default.
The right mouse button uses the fallback tool
(currently visible selection tool in the toolbar),
instead of always tweaking.
When any selection tool is active, right mouse always tweaks.
To enable fallback selection on RMB, set the "Right Mouse Select Action"
to "Selection Tool".
Internal changes:
- Add fall-back key-maps, separate key-maps needed for when the tool is
run as a fall-back. This is needed so RMB-select can support fall-back
tools, so left-mouse can be used when it's the active tool and RMB
can be used as a fall-back action when another tool is active.
- Add options field to tools so tools without gizmos can enable the
full-back tool keymap.
- Support multiple key-maps for keymap handlers.
- Fall-back keymaps now co-exist with the tool-keymaps.
So both keymaps may be active at once - using different mouse buttons.
When gizmos are in use, a highlighted gizmo prioritizes the
tool-keymap over the fall-back keymap.
Resolves T83690.
Reviewed By: JulienKaspar
Ref D12493
|
|
Some selection operators return (PASS_THROUGH & FINISHED) so the tweak
event isn't suppressed from the PRESS event having been handled.
This is now restricted to events with a PRESS action.
Without this, using CLICK for selection was passing the event through
which could run other actions unintentionally.
|
|
- Bend (Transform).
- Extrude to Cursor.
- Lasso Select (related operators such as node-cut links, mask.. etc).
- Rip Mesh / UV's.
- Vertex/Edge Slide.
|
|
|
|
View operations that left the cursor over a gizmo were not being updated
because the mouse-move event was added while the view was animated
instead of once the animation had completed.
Mouse-move events were also missing when smooth-view was disabled.
This fixes a glitch with the 3D view navigation gizmo where multiple
clicks on the view aligned axis failed to switch to the opposite side
unless the user moved the cursor between clicks.
|
|
This patch allows dropping material assets from material slot under the mouse
cursor. Before this change the material slot had to be hand-picked from the
properties panel.
For consistency it is chosen to do this in any shading mode as the tooltip shows
what is exactly going to happen during release.
The feature also works for other object types than Meshes as it uses the drawn surface on the
GPU to detect the material slots. Performance of this patch has been tested with AMD GCN3.0
cards and are very responsive.
Reviewed By: fclem, Severin
Differential Revision: https://developer.blender.org/D12190
|
|
Support axis constraints for the measure tool.
Press X, Y or Z to restrict the dimension to that axis,
it's also possible to toggle between orientations matching transform.
Reviewed By: campbellbarton
Ref D10872
|
|
This makes it possible to calculate orientation from functions
that don't have the context.
|
|
Reason was that the notifier did not set the NS_VIEW3D_SHADING
subtype, which the VR view listens for for a shading update.
In the case of "toggle xray", a notifier was absent altogether.
|
|
|
|
Also add gizmo group example to the tool-template.
|
|
Remove redundant code for drawing text strings that contain only ASCII.
See D12293 for much more detail.
Differential Revision: https://developer.blender.org/D12293
Reviewed by Campbell Barton
|
|
Also hyphenate 'mouse-move' use doxy sections in render_update.c &
move function comment from the header to the source.
|
|
The object was not deselected as it was expected that it would be
activated.
But this activation does not happen in edit mode.
|
|
This addresses reduced visibility of scenes (as displayed in the VR
headset) that can result from the 8-bit color depth format currently
used for XR swapchain images.
By switching to a swapchain format with higher color depth (RGB10_A2,
RGBA16, RGBA16F) for supported runtimes, visibility in VR should be
noticeably improved.
However, current limitations are lack of support for these higher
color depth formats by some XR runtimes, especially for OpenGL.
Also important to note that GPU_offscreen_create() now explicitly
takes in the texture format (eGPUTextureFormat) instead of a
"high_bitdepth" boolean.
Reviewed By: Julian Eisel, Clément Foucault
Differential Revision: http://developer.blender.org/D9842
|
|
To solve this, the unproject code was redone in order to simplify and optimize.
|
|
Caused by rB6942dd9f4900.
|
|
|
|
Was trying to get asset information even when there was none, i.e. when
the material wasn't an asset or not dragged from the Asset Browser.
|
|
|
|
This patch changes the drop named material tooltip to give feedback to
the user what is going to happen when they invoke the change.
There are 3 states:
* "": Operator will be canceled as not all data is present (dropping on
background.)
* "Drop <named material> on <object name> (slot <slot number>, replacing
<current material in slot>).
* "Drop <named material> on <object name> (slot <slot number).
Reviewed By: Severin
Maniphest Tasks: T90371
Differential Revision: https://developer.blender.org/D12106
|
|
While this was already the case for the most part
some selection operators stored common settings for reuse such as
"toggle", "extend" & "deselect".
Disabling storing these settings for later execution
as it means failure to set these options in the key-map re-uses
the value of the shortcut that was last called.
Skip saving these settings since this is a case where reusing them
isn't helpful.
Resolves T90275.
|
|
Originally the operator name was drawn next to the dragging content.
After that there was an option to add custom, static text with the
dragging content. This patch allows dynamic text to be drawn.
The custom text was implemented as out parameter of the poll function
what made the code unclear. This patch introduces a tooltip function
that separates tooltip generation from the poll function.
NOTE: the text should always be returned in its own memory block. This
block will be freed after it is copied in the drag struct.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12104
|
|
This partially reverts cb0b017d8f51: We can't store the asset handle in
the drag data, because the file pointer it wraps may be freed as the
Asset Browser generates its file list.
|
|
|
|
turned on
The core problem is that the geometry nodes modifier sometimes support
"mapping" (i.e. it remembers which new vertices correspond to edit mode
vertices) and sometimes it does not, depending on what the nodes are doing.
Also see rB07ce9910f7cc.
The solution here is that the fallback case in `BKE_mesh_foreach_mapped_edge`
does not call the callback with "invalid" indices.
Differential Revision: https://developer.blender.org/D12007
|
|
Would previously pass a few properties that are available via the
asset-handle now. This asset-handle is also required for some of the
asset API, e.g. the temporary ID loading. This will probably be needed
before too long.
|
|
While doxygen supports both, conform to our style guide.
Note that single back-tick's are already used in a majority of comments.
|
|
This shows the text as part of the assertion message.
|
|
This commit moves the storage of `bDeformGroup` and the active index
to `Mesh`, `Lattice`, and `bGPdata` instead of `Object`. Utility
functions are added to allow easy access to the vertex groups given
an object or an ID.
As explained in T88951, the list of vertex group names is currently
stored separately per object, even though vertex group data is stored
on the geometry. This tends to complicate code and cause bugs,
especially as geometry is created procedurally and tied less closely
to an object.
The "Copy Vertex Groups to Linked" operator is removed, since they
are stored on the geometry anyway.
This patch leaves the object-level python API for vertex groups in
place. Creating a geometry-level RNA API can be a separate step;
the changes in this commit are invasive enough as it is.
Note that opening a file saved in 3.0 in an earlier version means
the vertex groups will not be available.
Differential Revision: https://developer.blender.org/D11689
|
|
|
|
Use the same partial-update functions used by transform when
editing vertex locations with the number buttons.
This avoids unnecessary calculations for normals and tessellation.
This gives around 1.44x overall speedup on high poly meshes.
|
|
Confusingly, BKE_scene_frame_get did not match the frame number as expected by
BKE_scene_frame_set. Instead it return the value after time remapping, which
is commonly named "ctime".
* Rename BKE_scene_frame_get to BKE_scene_ctime_get
* Add a new BKE_scene_frame_get that matches BKE_scene_frame_set
* Use int/float depending if fractional frame is expected
|
|
When editing vertices with number buttons, tag the mesh, not the object.
This prevents the evaluated mesh being re-created for the object
and is correct as the mesh is being edited not the object.
Note that all tags for updating object geometry should be checked
to see if this change should be applied there too.
From a simple test on a high-poly mesh this gives around 1.3x
overall speedup.
|
|
Fly navigation has always had this option. They is particularly useful
when users use "Trackball" as their orbit method.
For walk navigation this works as a one off option. Not as a toggle like
for fly navigation.
Differential Revision: https://developer.blender.org/D11863
|
|
WALK_MODAL_TOGGLE > WALK_MODAL_GRAVITY_TOGGLE
|
|
The bug was always around and was introduced with the original code
e2a7168e9680f (2009).
|
