| Age | Commit message (Collapse) | Author |
|---|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
|
|
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
|
|
|
|
This partially reverts commit 81d2eda2bf8a0d73ed7bbf077c9fa4ffcf54aa6c.
That commit introduced unrelated changes.
|
|
`op` --> `op->customdata`
|
|
Setting the `op->customdata` out of `viewops_data_create` makes the usage of the function clearer thus making the code easier to read.
|
|
`viewops_data_alloc` allocates and stores some pointers in
`ViewOpsData` while `viewops_data_create` reuses already stored
pointers and also stores others in `ViewOpsData`.
The similar names and usages can confuse and in this case it also
creates a dependency on the order in which these functions are called.
Merging these functions simplifies usage and deduplicates code.
|
|
|
|
Only one of the four renders was being stopped.
|
|
Some navigation operators check flags like `RV3D_LOCK_ROTATION` in the
invoke function to see if the operation can be performed.
As the comment indicates, these checks should be in the poll function.
This avoids redundant initialization.
Note that this brings functional changes as now operators with context
`EXEC_DEFAULT` will also be affected by the flag.
(There doesn't seem to be a problem with the current code).
Differential Revision: https://developer.blender.org/D14005
|
|
Also update viewport comments.
|
|
|
|
ED_transverts_create_from_obedit expected an evaluated object.
Add flag to request TX_VERT_USE_MAPLOC to be set, which avoids having to
calculate this data when it's not used as well as the requirement
that the input object be evaluated from the depsgraph.
|
|
This fixes the crash by removing the `do_view3d_header_buttons` handler.
The code can work at a higher level here, using the operator for setting
the select mode, which makes this patch a cleanup as well.
The operator now has a description callback to add the custom
description used for the behavior in its invoke method.
Differential Revision: https://developer.blender.org/D13660
|
|
|
|
The view3d_edit.c file is already getting big (5436 lines) and mixes
operators of different uses.
Splitting the code makes it easier to read and simplifies the
implementation of new features.
Differential Revision: https://developer.blender.org/D13976
|
|
The viewport theme loaded and virtual modifiers allocated unnecessary.
|
|
|
|
GPU_select originally used GL_SELECT which defined the format for
storing the selection result.
Now this is no longer the case, define our own struct - making the code
easier to follow:
- Avoid having to deal with arrays in both `uint*` and `uint(*)[4]`
multiplying offsets by 4 in some cases & not others.
- No magic numbers for the offsets of depth & selection-ID.
- No need to allocate unused members to match GL_SELECT
(halving the buffer size).
|
|
|
|
|
|
Previously, macros were ifdefed using the cmake option `WITH_INTERNATIONAL`
However, the is unnecessary as withen the functions themselves have checks for building without internationalization.
This also means that many `add_definitions(-DWITH_INTERNATIONAL)` are also unnecessary.
Reviewed By: mont29, LazyDodo
Differential Revision: https://developer.blender.org/D13929
|
|
During sprite fright loading of complex scenes would spend a long time in remapping ID's
The remapping process is done on a per ID instance that resulted in a very time consuming
process that goes over every possible ID reference to find out if it needs to be updated.
If there are N of references to ID blocks and there are M ID blocks that needed to be remapped
it would take N*M checks. These checks are scattered around the place and memory.
Each reference would only be updated at most once, but most of the time no update is needed at all.
Idea: By grouping the changes together will reduce the number of checks resulting in improved performance.
This would only require N checks. Additional benefits is improved data locality as data is only loaded once
in the L2 cache.
It has be implemented for the resyncing process and UI editors.
On an Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz 16Gig the resyncing process went
from 170 seconds to 145 seconds (during hotspot recording).
After this patch has been applied we could add similar approach
to references (references between data blocks) and functionality (tagged deletion).
In my understanding this could reduce the resyncing process to less than a second.
Opening the village production file between 10 and 20 seconds.
Flame graphs showing that UI remapping isn't visible anymore (`WM_main_remap_editor_id_reference`)
* Master {F12769210 size=full}
* This patch {F12769211 size=full}
Reviewed By: mont29
Maniphest Tasks: T94185
Differential Revision: https://developer.blender.org/D13615
|
|
This reverts commit 948211679f2a0681421160be0d3b90f507bc0be7.
This commit introduced some regressions in the test suite.
As this change is a core part of blender Bastien and I decided to revert
it as the solution isn't clear and needs more investigation.
The following tests FAILED:
62 - blendfile_liblink (SEGFAULT)
63 - blendfile_library_overrides (SEGFAULT)
It fails in (id_us_ensure_real)
|
|
During sprite fright loading of complex scenes would spend a long time in remapping ID's
The remapping process is done on a per ID instance that resulted in a very time consuming
process that goes over every possible ID reference to find out if it needs to be updated.
If there are N of references to ID blocks and there are M ID blocks that needed to be remapped
it would take N*M checks. These checks are scattered around the place and memory.
Each reference would only be updated at most once, but most of the time no update is needed at all.
Idea: By grouping the changes together will reduce the number of checks resulting in improved performance.
This would only require N checks. Additional benefits is improved data locality as data is only loaded once
in the L2 cache.
It has be implemented for the resyncing process and UI editors.
On an Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz 16Gig the resyncing process went
from 170 seconds to 145 seconds (during hotspot recording).
After this patch has been applied we could add similar approach
to references (references between data blocks) and functionality (tagged deletion).
In my understanding this could reduce the resyncing process to less than a second.
Opening the village production file between 10 and 20 seconds.
Flame graphs showing that UI remapping isn't visible anymore (`WM_main_remap_editor_id_reference`)
* Master {F12769210 size=full}
* This patch {F12769211 size=full}
Reviewed By: mont29
Maniphest Tasks: T94185
Differential Revision: https://developer.blender.org/D13615
|
|
This adds vertex creasing support for OpenSubDiv for modeling, rendering,
Alembic and USD I/O.
For modeling, vertex creasing follows the edge creasing implementation with an
operator accessible through the Vertex menu in Edit Mode, and some parameter in
the properties panel. The option in the Subsurf and Multires to use edge
creasing also affects vertex creasing.
The vertex crease data is stored as a CustomData layer, unlike edge creases
which for now are stored in `MEdge`, but will in the future also be moved to
a `CustomData` layer. See comments for details on the difference in behavior
for the `CD_CREASE` layer between egdes and vertices.
For Cycles this adds sockets on the Mesh node to hold data about which vertices
are creased (one socket for the indices, one for the weigths).
Viewport rendering of vertex creasing reuses the same color scheme as for edges
and creased vertices are drawn bigger than uncreased vertices.
For Alembic and USD, vertex crease support follows the edge crease
implementation, they are always read, but only exported if a `Subsurf` modifier
is present on the Mesh.
Reviewed By: brecht, fclem, sergey, sybren, campbellbarton
Differential Revision: https://developer.blender.org/D10145
|
|
As described in T91186, this commit moves mesh vertex normals into a
contiguous array of float vectors in a custom data layer, how face
normals are currently stored.
The main interface is documented in `BKE_mesh.h`. Vertex and face
normals are now calculated on-demand and cached, retrieved with an
"ensure" function. Since the logical state of a mesh is now "has
normals when necessary", they can be retrieved from a `const` mesh.
The goal is to use on-demand calculation for all derived data, but
leave room for eager calculation for performance purposes (modifier
evaluation is threaded, but viewport data generation is not).
**Benefits**
This moves us closer to a SoA approach rather than the current AoS
paradigm. Accessing a contiguous `float3` is much more efficient than
retrieving data from a larger struct. The memory requirements for
accessing only normals or vertex locations are smaller, and at the
cost of more memory usage for just normals, they now don't have to
be converted between float and short, which also simplifies code
In the future, the remaining items can be removed from `MVert`,
leaving only `float3`, which has similar benefits (see T93602).
Removing the combination of derived and original data makes it
conceptually simpler to only calculate normals when necessary.
This is especially important now that we have more opportunities
for temporary meshes in geometry nodes.
**Performance**
In addition to the theoretical future performance improvements by
making `MVert == float3`, I've done some basic performance testing
on this patch directly. The data is fairly rough, but it gives an idea
about where things stand generally.
- Mesh line primitive 4m Verts: 1.16x faster (36 -> 31 ms),
showing that accessing just `MVert` is now more efficient.
- Spring Splash Screen: 1.03-1.06 -> 1.06-1.11 FPS, a very slight
change that at least shows there is no regression.
- Sprite Fright Snail Smoosh: 3.30-3.40 -> 3.42-3.50 FPS, a small
but observable speedup.
- Set Position Node with Scaled Normal: 1.36x faster (53 -> 39 ms),
shows that using normals in geometry nodes is faster.
- Normal Calculation 1.6m Vert Cube: 1.19x faster (25 -> 21 ms),
shows that calculating normals is slightly faster now.
- File Size of 1.6m Vert Cube: 1.03x smaller (214.7 -> 208.4 MB),
Normals are not saved in files, which can help with large meshes.
As for memory usage, it may be slightly more in some cases, but
I didn't observe any difference in the production files I tested.
**Tests**
Some modifiers and cycles test results need to be updated with this
commit, for two reasons:
- The subdivision surface modifier is not responsible for calculating
normals anymore. In master, the modifier creates different normals
than the result of the `Mesh` normal calculation, so this is a bug
fix.
- There are small differences in the results of some modifiers that
use normals because they are not converted to and from `short`
anymore.
**Future improvements**
- Remove `ModifierTypeInfo::dependsOnNormals`. Code in each modifier
already retrieves normals if they are needed anyway.
- Copy normals as part of a better CoW system for attributes.
- Make more areas use lazy instead of eager normal calculation.
- Remove `BKE_mesh_normals_tag_dirty` in more places since that is
now the default state of a new mesh.
- Possibly apply a similar change to derived face corner normals.
Differential Revision: https://developer.blender.org/D12770
|
|
MSVC used to warn about const mismatch for arguments passed by value.
Remove these as newer versions of MSVC no longer show this warning.
|
|
|
|
This evaluator is used in order to evaluate subdivision at render time, allowing for
faster renders of meshes with a subdivision surface modifier placed at the last
position in the modifier list.
When evaluating the subsurf modifier, we detect whether we can delegate evaluation
to the draw code. If so, the subdivision is first evaluated on the GPU using our own
custom evaluator (only the coarse data needs to be initially sent to the GPU), then,
buffers for the final `MeshBufferCache` are filled on the GPU using a set of
compute shaders. However, some buffers are still filled on the CPU side, if doing so
on the GPU is impractical (e.g. the line adjacency buffer used for x-ray, whose
logic is hardly GPU compatible).
This is done at the mesh buffer extraction level so that the result can be readily used
in the various OpenGL engines, without having to write custom geometry or tesselation
shaders.
We use our own subdivision evaluation shaders, instead of OpenSubDiv's vanilla one, in
order to control the data layout, and interpolation. For example, we store vertex colors
as compressed 16-bit integers, while OpenSubDiv's default evaluator only work for float
types.
In order to still access the modified geometry on the CPU side, for use in modifiers
or transform operators, a dedicated wrapper type is added `MESH_WRAPPER_TYPE_SUBD`.
Subdivision will be lazily evaluated via `BKE_object_get_evaluated_mesh` which will
create such a wrapper if possible. If the final subdivision surface is not needed on
the CPU side, `BKE_object_get_evaluated_mesh_no_subsurf` should be used.
Enabling or disabling GPU subdivision can be done through the user preferences (under
Viewport -> Subdivision).
See patch description for benchmarks.
Reviewed By: campbellbarton, jbakker, fclem, brecht, #eevee_viewport
Differential Revision: https://developer.blender.org/D12406
|
|
Outliner would frame the armature object instead of the bone if the bone
was on a hidden armature layer.
Similar to issues reported in e.g. T58068 and T80464, this is due to the
fact that `BKE_pose_channel_active` always checks for the armature layer
(and returns NULL if a bone is not on a visible armature layer).
Now propose to make this layer check **optional** (and e.g. from the
Outliner be more permissive). This also introduces
`BKE_pose_channel_active_if_layer_visible` which just wraps
`BKE_pose_channel_active` with the check being ON.
Maniphest Tasks: T92930
Differential Revision: https://developer.blender.org/D13154
|
|
bda9e4238a07a72c26598ea9025e00f6ca896750 changed smooth-view
not to redraw when there were no changes made.
Redrawing is needed for repositioning the cursor.
Subscribe to changes to the 3d cursor to ensure all view ports
are updated (not just the current one).
|
|
Float precision issues cause the `ED_view3d_win_to_3d_on_plane` to return
a value even when the view ray is parallel to the plane.
A more general solution might be desired in this case, as other areas that
use `ED_view3d_win_to_3d_on_plane` might have the same problem.
For now, just work around the problem for the snap cursor.
|
|
There is an apparent compiler bug here, tweak the code to avoid it. This did
not affect official builds as we were still using Xcode 12.
|
|
Ref T92709
|
|
`ED_view3d_win_to_3d_on_plane` does not use the `clip_start` and
`clip_end` values of the scene, so the `do_clip` option can be misleading
especially in the orthographic view where the `clip_start` is negative.
For now, don't use the `do_clip` option in orthographic view.
|
|
`g_data_intern.state_default.gzgrp_type` is a very specific member and
cannot be set to default.
|
|
This is very old and is unlikely to be useful in the near future.
|
|
The default snap behavior to perform on tools and cursors is to the
final geometry and not edited geometry.
In snapping to edited geometry, there are some specific behaviors that
are not convenient in some cases. For example the general occlusion
test of X-Ray geometries during dragdrop.
This fix also resolves a regression for tools like measure and placement
that were also ignoring the snap to face in x-ray mode.
Differential Revision: https://developer.blender.org/D13410
|
|
|
|
Don't use Cycles for rendering thumbnails, fall back to Solid shading.
Differential Revision: https://developer.blender.org/D13406
|
|
Bug introduced in {rBaa0ac0035a0d}.
The invalid depth fallback was changed to `FLT_MAX` in order to match the
annotation and gpencil operations.
This broke the `Interactive Light Track` operator which invalidates the
operation if the depth value is `1.0f`.
The chosen solution was to change the value tested in the annotation and
gpencil operations.
|
|
|
|
Was not taking into account curve points at all.
Maniphest Tasks: T93198
Differential Revision: https://developer.blender.org/D13281
|
|
|
|
The old code did not work when there were multiple ids with
the same name (which can happen when ids are linked in).
The solution is to use the session ids instead. Those are different
even when two ids have the same name.
Differential Revision: https://developer.blender.org/D11116
|
|
multiple snap points""""
This reverts commit b8bf40ed4bf618a6bc908e39278cfbfd385e0d4b.
|
|
'Snap Source'""""
This reverts commit 701f2dfd5bc61c0f37603880fa21abfe8b1d9620.
|
|
Source'"""
This reverts commit 25fa6c74b977ac983a34b9adf5ab2f20fe2f4932.
|
