Age | Commit message (Collapse) | Author |
|
This commit adds a new face nearest snapping mode, adds new snapping
options, and (lightly) refactors code around snapping.
The new face nearest snapping mode will snap transformed geometry to the
nearest surface in world space. In contrast, the original face snapping
mode uses projection (raycasting) to snap source to target geometry.
Face snapping therefore only works with what is visible, while nearest
face snapping can snap geometry to occluded parts of the scene. This new
mode is critical for retopology work, where some of the target mesh
might be occluded (ex: sliding an edge loop that wraps around the
backside of target mesh).
The nearest face snapping mode has two options: "Snap to Same Target"
and "Face Nearest Steps". When the Snap to Same Object option is
enabled, the selected source geometry will stay near the target that it
is nearest before editing started, which prevents the source geometry
from snapping to other targets. The Face Nearest Steps divides the
overall transformation for each vertex into n smaller transformations,
then applies those n transformations with surface snapping interlacing
each step. This steps option handles transformations that cross U-shaped
targets better.
The new snapping options allow the artist to better control which target
objects (objects to which the edited geometry is snapped) are considered
when snapping. In particular, the only option for filtering target
objects was a "Project onto Self", which allowed the currently edited
mesh to be considered as a target. Now, the artist can choose any
combination of the following to be considered as a target: the active
object, any edited object that isn't active (see note below), any non-
edited object. Additionally, the artist has another snapping option to
exclude objects that are not selectable as potential targets.
The Snapping Options dropdown has been lightly reorganized to allow for
the additional options.
Included in this patch:
- Snap target selection is more controllable for artist with additional
snapping options.
- Renamed a few of the snap-related functions to better reflect what
they actually do now. For example, `applySnapping` implies that this
handles the snapping, while `applyProject` implies something entirely
different is done there. However, better names would be
`applySnappingAsGroup` and `applySnappingIndividual`, respectively,
where `applySnappingIndividual` previously only does Face snapping.
- Added an initial coordinate parameter to snapping functions so that
the nearest target before transforming can be determined(for "Snap to
Same Object"), and so the transformation can be broken into smaller
steps (for "Face Nearest Steps").
- Separated the BVH Tree getter code from mesh/edit mesh to its own
function to reduce code duplication.
- Added icon for nearest face snapping.
- The original "Project onto Self" was actually not correct! This option
should be called "Project onto Active" instead, but that only matters
when editing multiple meshes at the same time. This patch makes this
change in the UI.
Reviewed By: Campbell Barton, Germano Cavalcante
Differential Revision: https://developer.blender.org/D14591
|
|
NOTE: this patch originated in T98015 which was split into multiple
reports. While it could be split into multiple patches these are very
much related so keeping as one for now
This patch fixes the following issues:
[1] autokeying transforms in preview only creates keyframes if there is
an FCurve already
[2] autokeying transforms in preview only creates keyframes for
rotation/scale if rotating/scaling around cursor (should keyframe
position as well)
[3] autokeying transforms in preview does not work during animation
playback
For [1], a param was added to `ED_autokeyframe_property` which can tweak
its default behavior of only creating keyframes on already keyed
properties (which was fine because this is mostly called from buttons
where this behavior is desired). Callers such as gizmos (or the VSE in
our case) can use this additional param so that keyframes are also
created on "not-yet-keyframed" properties.
For [2], the pivot is checked and position properties also keyed if
necessary (which is also consistent with the way objects are keyed in
the 3DView)
For [3], `animrecord_check_state` was changed to be able to work on
scenes as well and the transform system in the VSE preview was made
aware of the screen's `animtimer`.
NOTE: there are still things to be improved for keyframing in the VSE,
the most obvious is probably a `keyframe_insert` operator (with
keyingsets)
Fixes T98429, T98430, T98431
Maniphest Tasks: T98015, T98431, T98430, T98429
Differential Revision: https://developer.blender.org/D15047
|
|
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3dbec we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
ff5e8e6d535374891e09bc0e6ceb7059a22bdd53 dereferenced a NULL pointer
when dragging a bone with a connected parent in pose-mode.
|
|
And silence unused variable warning.
|
|
The return value of this function was removed in ff5e8e6d535374891e09
|
|
Move the bones count and `has_translate_rotate` parameter out of the
function as they are not required in some places.
|
|
This was added in rBd13970de8627, now use in more places.
|
|
Ref T92709
|
|
Support gimbal orientation for objects & bones.
|
|
|
|
Support extracting identifiers RNA paths into fixed size buffer
since the maximum size of the identifier is known all cases.
- Add BLI_str_unescape_ex to support limiting the destination buffer.
- Add BLI_str_quoted_substr to copy values into a fixed size buffer.
|
|
Rely on BLI_str_quoted_substrN to detect if the prefix exists since
this function exists early there is no need to check before calling.
|
|
Also hyphenate 'mouse-move' use doxy sections in render_update.c &
move function comment from the header to the source.
|
|
|
|
|
|
|
|
This was added in 9516921c05bd9fee5c94942eb8e38f47ba7e4351
so overlays would redraw, as far as I can see it's no longer needed.
Reviewed By: fclem
Ref D11322
|
|
Remove the `BONE_UNKEYED` flag. It was only written (set/cleared) but
never actually read.
Also remove `framechange_poses_clear_unkeyed()` as its only function was
to clear the `BONE_UNKEYED` flag. It wasn't used anywhere either.
The only code that used the flag was the `extract_pose_from_action()`,
which was removed in 2869ce6cfab3aa4ff471bef6e49ac6fe15426247 (2009).
No functional changes.
|
|
|
|
Flags unified:
T_CURSOR -> CTX_CURSOR
T_TEXTURE -> CTX_TEXTURE
Flags moved:
T_CAMERA -> CTX_CAMERA
T_POSE -> CTX_POSE_BONE
T_OBJECT -> CTX_OBJECT
T_TEXTURE -> CTX_TEXTURE_SPACE
Flag renamed:
CTX_EDGE -> CTX_EDGE_DATA
|
|
|
|
This was returning an empty allocated string, however almost
all callers checked if the return value was NULL before freeing,
making for misunderstandings on the intended use of this function.
BCAnimationSampler::initialize_curves for example detected the
f-curves animation type to 'bone' based on a non-NULL return value
which never failed.
Also fixes two leaks where the the result of BLI_str_quoted_substrN
wasn't freed.
|
|
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
Cleanup old tracker task format to the new. e.g: [#34039] to T34039
Ref D8718
|
|
Caused by rB9a7f5f1bb422.
If using Auto IK (or targetless IK and Auto IK together), two temporary
constraints were added.
- from pose_grab_with_ik_add (even for targetless IK)
- from add_pose_transdata (even for Auto IK)
Since both both do similar things, but cannot work in tandem (with
possibly different chainlengths for example), we have to decide which
type to prefer over the other (as in: do not create a constraint for the
other).
It seems better to ignore the 'Auto IK' option on bones that will
have targetless IK set up for them specificallly [e.g. defining special
chainlength]. This way you can still work with 'Auto IK' ON generally
[with interactive chainlength control], but also have specific bones that
need their own custom chainlength.
For now, the most straightforward fix is to
- only add constraints for Auto IK from pose_grab_with_ik_add()
- only add constraints for targetless IK from add_pose_transdata()
Note: this area has some potential for later refactoring:
- move creation of all temporary constraints to a single place
[preferably pose_grab_with_ik_add]
- use only those temporary constraints in transform code [atm. we still
flip CONSTRAINT_IK_AUTO around on the "original" -- unneccesarily, after
rB9a7f5f1bb422 a dedicated temporary constraint is now always available]
- clarify CONSTRAINT_IK_AUTO vs. CONSTRAINT_IK_TEMP
- obeying standard rotation locks on bones in the chain (not just the
the IK locks) is not consistent between targetless IK and Auto IK
Potential candidate for 2.90.1 as well as 2.83 LTS
Maniphest Tasks: T80437
Differential Revision: https://developer.blender.org/D8930
|
|
Custom driver functions need access to the dependency graph that is
triggering the evaluation of the driver. This patch passes the
dependency graph pointer through all the animation-related calls.
Instead of passing the evaluation time to functions, the code now passes
an `AnimationEvalContext` pointer:
```
typedef struct AnimationEvalContext {
struct Depsgraph *const depsgraph;
const float eval_time;
} AnimationEvalContext;
```
These structs are read-only, meaning that the code cannot change the
evaluation time. Note that the `depsgraph` pointer itself is const, but
it points to a non-const depsgraph.
FCurves and Drivers can be evaluated at a different time than the
current scene time, for example when evaluating NLA strips. This means
that, even though the current time is stored in the dependency graph, we
need an explicit evaluation time.
There are two functions that allow creation of `AnimationEvalContext`
objects:
- `BKE_animsys_eval_context_construct(Depsgraph *depsgraph, float
eval_time)`, which creates a new context object from scratch, and
- `BKE_animsys_eval_context_construct_at(AnimationEvalContext
*anim_eval_context, float eval_time)`, which can be used to create a
`AnimationEvalContext` with the same depsgraph, but at a different
time. This makes it possible to later add fields without changing any
of the code that just want to change the eval time.
This also provides a fix for T75553, although it does require a change
to the custom driver function. The driver should call
`custom_function(depsgraph)`, and the function should use that depsgraph
instead of information from `bpy.context`.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D8047
|
|
And better identify what is bool and what is flag in the
proportional edit properties.
|
|
|
|
the menu
|
|
|
|
|
|
|
|
used
Caused by {rBa6a9a12e8f32}
Other relevant commits:
rBb8ca806b7798e2f8dd6effca8f0d081b3cd8c23f
rBde530a95dc7b482dc22c933b9b8b2a98c79b5663
The issue is caused by some leftover BONE_TRANSFORM_MIRROR flags on a
bone from previous runs (file in the report had the flag still on
forearm.R).
With these false leftover flags still set, `pose_grab_with_ik()` cannot
work correctly. Culprit commit above removed the early clearing of this
flag on all bones, this should be restored [this happened in
`count_set_pose_transflags()`].
This should only be done in the beginning of the transform process, so
now still clear the flags early in 'createTransPose()' [but dont restore
this in 'count_set_pose_transflags()' -- this will be called from
special_aftertrans_update again, so placing the clearance here only
complicates things (autokeyframe_pose() still needs to work as well)...]
Maniphest Tasks: T75810
Differential Revision: https://developer.blender.org/D7527
|
|
count_set_pose_transflags --> transform_convert_pose_transflags_update
count_bone_select --> armature_bone_transflags_update_recursive
Also don't mix `BONE_TRANSFORM_MIRROR` with `BONE_TRANSFORM` in
transflag. (This was a mess introduced in rBde530a95dc7b).
|
|
|
|
Needed to use a temporary pchan iterator to make sure that we keep track
of the selected bone.
|
|
Fixed a coding mistake when adding temp IK chains with Auto-IK.
We need to use the data from the new temporary constraint.
|
|
|
|
as FakeIK for FK posing)
The issue was that the deps graph relation builder assumed that all
bones that had a IK constraint on them would be evaluated. However for
targetless IK bones, only the active bone would receive updates and the
others would be skipped (as those would be treated as if the IK
constraint was disabled).
I didn't see an easy way to solve this from the depsgraph side of
things.
Instead I came up with a solution that I feel is quite strait forward
and reflects what is actually supposed to happen under the hood.
Now all targetless IK constraints are treated as disabled and will not
be added to any relations in the depsgraph.
Instead, a temporary IK constraint will be created when the bone in
question is transformed. This is basically activating "Auto IK" for the
bone while transforming.
Reviewed By: Sergey, Brecht
Differential Revision: http://developer.blender.org/D7378
|
|
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
|
|
These headers are not needed right away, but will be in the upcoming
commit.
|
|
This was caused by the removal of some `BONE_TRANSFORM_MIRROR` flag
handling in rBde530a95dc7b482dc22c933b9b8b2a98c79b5663. I simply
restored those lines that caused this issue.
|
|
|
|
Fix T69572
TODO: support `Relative-Mirror` as well.
Maniphest Tasks: T69572
Differential Revision: https://developer.blender.org/D5862
|
|
Part of T68836
`transform conversions.c` is a file that is getting too big (almost 10,000 lines).
So it's a good idea to split it into smaller files.
differential revision: https://developer.blender.org/D5677
|