Age | Commit message (Collapse) | Author |
|
When a change happens which invalidates view layers the syncing will be postponed until the first usage.
This will improve importing or adding many objects in a single operation/script.
`BKE_view_layer_need_resync_tag` is used to tag the view layer to be out of sync. Before accessing
`BKE_view_layer_active_base_get`, `BKE_view_layer_active_object_get`, `BKE_view_layer_active_collection`
or `BKE_view_layer_object_bases` the caller should call `BKE_view_layer_synced_ensure`.
Having two functions ensures that partial syncing could be added as smaller patches in the future. Tagging a
view layer out of sync could be replaced with a partial sync. Eventually the number of full resyncs could be
reduced. After all tagging has been replaced with partial syncs the ensure_sync could be phased out.
This patch has been added to discuss the details and consequences of the current approach. For clarity
the call to BKE_view_layer_ensure_sync is placed close to the getters.
In the future this could be placed in more strategical places to reduce the number of calls or improve
performance. Finding those strategical places isn't that clear. When multiple operations are grouped
in a single script you might want to always check for resync.
Some areas found that can be improved. This list isn't complete.
These areas aren't addressed by this patch as these changes would be hard to detect to the reviewer.
The idea is to add changes to these areas as a separate patch. It might be that the initial commit would reduce
performance compared to master, but will be fixed by the additional patches.
**Object duplication**
During object duplication the syncing is temporarily disabled. With this patch this isn't useful as when disabled
the view_layer is accessed to locate bases. This can be improved by first locating the source bases, then duplicate
and sync and locate the new bases. Will be solved in a separate patch for clarity reasons ({D15886}).
**Object add**
`BKE_object_add` not only adds a new object, but also selects and activates the new base. This requires the
view_layer to be resynced. Some callers reverse the selection and activation (See `get_new_constraint_target`).
We should make the selection and activation optional. This would make it possible to add multiple objects
without having to resync per object.
**Postpone Activate Base**
Setting the basact is done in many locations. They follow a rule as after an action find the base and set
the basact. Finding the base could require a resync. The idea is to store in the view_layer the object which
base will be set in the basact during the next sync, reducing the times resyncing needs to happen.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15885
|
|
This patch is a cleanup required before refactoring the view layer syncing
process {T73411}.
* Remove FIRSTBASE.
* Remove LASTBASE.
* Remove BASACT.
* Remove OBEDIT_FROM_WORKSPACE.
* Replace OBACT with BKE_view_layer_active_object.
* Replace OBEDIT_FROM_VIEW_LAYER with BKE_view_layer_edit_object.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15799
|
|
Running transform in background mode or without a region would crash.
|
|
The view offset, calculated by the Edge Pan system, only affects the
position of the nodes, but forget to update:
- snapping data
- final value of transform
- values used for custom drawing
Therefore, to avoid having to update a lot of scattered data, the
`transformViewUpdate` utility has been implemented to recalculate input
values when the view changes.
This utility does more than is necessary to fix the bug, but with that,
it can work in any situation.
|
|
The ISMOUSE macro was used in situations only button events
needed to be checked.
The only functional difference would be MOUSEMOVE events were
previously accepted for these checks.
|
|
NOTE: this patch originated in T98015 which was split into multiple
reports. While it could be split into multiple patches these are very
much related so keeping as one for now
This patch fixes the following issues:
[1] autokeying transforms in preview only creates keyframes if there is
an FCurve already
[2] autokeying transforms in preview only creates keyframes for
rotation/scale if rotating/scaling around cursor (should keyframe
position as well)
[3] autokeying transforms in preview does not work during animation
playback
For [1], a param was added to `ED_autokeyframe_property` which can tweak
its default behavior of only creating keyframes on already keyed
properties (which was fine because this is mostly called from buttons
where this behavior is desired). Callers such as gizmos (or the VSE in
our case) can use this additional param so that keyframes are also
created on "not-yet-keyframed" properties.
For [2], the pivot is checked and position properties also keyed if
necessary (which is also consistent with the way objects are keyed in
the 3DView)
For [3], `animrecord_check_state` was changed to be able to work on
scenes as well and the transform system in the VSE preview was made
aware of the screen's `animtimer`.
NOTE: there are still things to be improved for keyframing in the VSE,
the most obvious is probably a `keyframe_insert` operator (with
keyingsets)
Fixes T98429, T98430, T98431
Maniphest Tasks: T98015, T98431, T98430, T98429
Differential Revision: https://developer.blender.org/D15047
|
|
Contrary to the initial intention (in rB9916e0193c36), `TREDRAW_SOFT`
flag, when isolated, is not cleared in `transformApply` and therefore is
used in the `drawTransformApply` callback which basically recalculates
the `transformation` which finally clears the flag.
So remove the `drawTransformApply` callback so `transformApply` is not
called when unnecessary.
Differential Revision: https://developer.blender.org/D14430
|
|
Error in b8960267dd51f9108b3b49e9b762e6b4d35ae1dc,
the flag was cleared before use.
|
|
This avoids transform jumping which is a problem when tweaking values a
small amount. A fix for T40549 was made box-select used the location
when the key was pressed.
While it's important for box-select or any operator where it's expected
the drag-start location is used, this is only needed in some cases.
Since the event stores the click location and the current location,
no longer overwrite the events real location. Operators that depend on
using the drag-start can use this location if they need.
In some cases the region relative cursor location (Event.mval) now needs
to be calculated based on the click location.
- Added `WM_event_drag_start_mval` for convenient access to the region
relative drag-start location (for drag events).
- Added `WM_event_drag_start_xy` for window relative coordinates.
- Added Python property Event.mouse_prev_click_x/y
Resolves T93599.
Reviewed By: Severin
Ref D14213
|
|
- Rename ED_view3d_win_to_delta `mval` argument to `xy_delta` as it
as it was misleading since this is an screen-space offset not a region
relative cursor position (typical use of the name `mval`).
Also rename the variable passed to this function which also used the
term `mval` in many places.
- Re-order the output argument of ED_view3d_win_to_delta last.
use an r_ prefix for return arguments.
- Document how the `zfac` argument is intended to be used.
- Split ED_view3d_calc_zfac into two functions as the `r_flip` argument
was only used in some special cases.
|
|
This commit renames enums related the "Curve" object type and ID type
to add `_LEGACY` to the end. The idea is to make our aspirations clearer
in the code and to avoid ambiguities between `CURVE` and `CURVES`.
Ref T95355
To summarize for the record, the plans are:
- In the short/medium term, replace the `Curve` object data type with
`Curves`
- In the longer term (no immediate plans), use a proper data block for
3D text and surfaces.
Differential Revision: https://developer.blender.org/D14114
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
This adds vertex creasing support for OpenSubDiv for modeling, rendering,
Alembic and USD I/O.
For modeling, vertex creasing follows the edge creasing implementation with an
operator accessible through the Vertex menu in Edit Mode, and some parameter in
the properties panel. The option in the Subsurf and Multires to use edge
creasing also affects vertex creasing.
The vertex crease data is stored as a CustomData layer, unlike edge creases
which for now are stored in `MEdge`, but will in the future also be moved to
a `CustomData` layer. See comments for details on the difference in behavior
for the `CD_CREASE` layer between egdes and vertices.
For Cycles this adds sockets on the Mesh node to hold data about which vertices
are creased (one socket for the indices, one for the weigths).
Viewport rendering of vertex creasing reuses the same color scheme as for edges
and creased vertices are drawn bigger than uncreased vertices.
For Alembic and USD, vertex crease support follows the edge crease
implementation, they are always read, but only exported if a `Subsurf` modifier
is present on the Mesh.
Reviewed By: brecht, fclem, sergey, sybren, campbellbarton
Differential Revision: https://developer.blender.org/D10145
|
|
Operator was erroneously starting edge_slide operation.
Revert part of the changes in rB3fab16fe8eb4 as obedit_type was being
confused with object_mode.
|
|
This is a micro-optimization that is useful for operators with many properties.
|
|
Ref T92709
|
|
The default orientation of the mode was being indicated as overridden,
although the one of constraint was used.
|
|
Conflicts:
source/blender/editors/transform/transform_generics.c
|
|
Silenciate warnings of usage of 'else' after 'return'
|
|
|
|
|
|
This reverts commit 717a971035071d36af03d65713408f4da1f69cb3.
|
|
This reverts commit 2a9cfdac7e126e37afb82e15a131717041f3d2f8.
|
|
This reverts commit 5e6fdaa07fff907e02b36813ccde0702bad4fb4d.
|
|
This reverts commit 1d1855e95f916685fed970904fc37701a4a0e031.
|
|
This feature has been desired for some time:
- https://rightclickselect.com/p/ui/Tqbbbc/allow-navigating-while-transforming (See comments);
- D1583;
- T37427;
In short, blocking navigation during transform limits the user to move the object only to visible areas within the screen and hinders the allocation of objects within closed meshes.
The node editor is also impaired because some nodes are far between them and the connectors are too small.
The only disadvantage of this patch (as I see it) is the conflict with the existing key map:
MIDDLEMOUSE:
- enable axis constrain in 3D view;
WHEELDOWNMOUSE, WHEELUPMOUSE, PAGEUPKEY, PAGEDOWNKEY:
- change the threshold of the proportional edit;
So the patch solution was to change these keymaps:
- MIDDLEMOUSE to Alt+MIDDLEMOUSE;
- WHEELDOWNMOUSE, WHEELUPMOUSE, PAGEUPKEY, PAGEDOWNKEY to Alt+(corresponding key);
When you use this new keymap for the first time in the proportional edit, it may seem strange due to the custom of using it (both in View2D and View3D).
But quickly the user gets used to it.
Alternatively we can add an option to the user preferences ([] Allow navigating while transforming). (I'm not much fan of this option).
The patch was done on branch2.8. But maybe it's a good idea to apply it to 2.79
Differential Revision: https://developer.blender.org/D2624
|
|
There should be a special `t->around` for this case, but for now let's
just avoid having the individual origins overlap.
|
|
The initialization of `t->around` and `t->view` was scattered and with
duplicate code
|
|
Support gimbal orientation for objects & bones.
|
|
Make the "xform" tool/gizmo available for strip transformations in the
sequencer preview window.
Because of the amount of hacks needed to make the gizmo work nicely with
multiple strips at the same time, it was decided to only show the
translate gizmo when multiple strips are selected.
This is because the transforms with multiple strips would appear buggy
because of our lack of shearing support in the transform system.
There is also currently no way to properly sync the gizmo drawing with
the transform when using multiple strips.
Reviewed By: Richard Antalik, Campbell Barton
Differential Revision: http://developer.blender.org/D12729
|
|
- Use 2D cursor in the preview space using shortcuts
matching the UV editor and 3D view.
- Add Cursor tool, cursor transform.
- Support for cursor and bound-box pivot.
- Add pivot pie menu.
|
|
Add tools for image manipulation in sequencer preview region.
This includes:
- Translate, rotate and resize operators, tools and gizmos
- Origin for image transformation
- Median point and individual origins pivot modes
- Select and Box select operator works in preview
- Image overlay drawing
ref T90156
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12105
|
|
This allows a hack to be removed that temporarily overwrote
the 3D views gizmo display flag.
Also reverse change from fb27a9bb983ce74b8d8f5f871cf0706dd1e25051
that runs poll on modal gizmo groups as there is some risk
that the poll function unlinks the gizmo.
|
|
Hiding viewport navigation gizmos caused the UI to "flicker"
unnecessarily, the axis could also be useful as a reference.
Resolves T73684
|
|
Caused by {rBb0d9e6797fb8}
Ideally `td->loc` should always be set and point to a 3d array.
|
|
- New operator property to toggle edge panning in the keymap:
This is disabled by default to avoid edge-panning in cases where it
gets distracting, such as adding a new node. Only the explicit
translate operator(s) (GKEY or drag) have this enabled now.
- Restore the initial view rect on edge pan cancel:
The initial view rect is now stored in the edge pan operator data.
When an operator with edge panning is cancelled it can now call the
`UI_view2d_edge_pan_cancel` function to restore the original View2D
rect.
- Less delay in node editor scrolling:
Delay is useful when scrolling through long lists, such as in the
outliner, but makes node scrolling feel sluggish and unresponsive.
The lower scroll speed here makes a faster response the better option.
- Zoom influence feature:
Somewhat slower scrolling in UI-space when zoomed out. With the 0.5
zoom influence factor nodes behave as if zoom factor is halved,
otherwise it gets too fast when zoomed out. Previously scrolling would
always be constant-speed in UI space, now it's half-way between UI
space and node (view) space.
|
|
The `recalcData` function is defined in `transform_convert.c`, so the
header is most expected to be `transform_convert.h`.
|
|
`t->obedit_type` is read to indicate if we are in uv edit mode.
Also fixes a crash introduced in {rBdd14ea18190ff27082009f73a556569a43377a71}.
|
|
|
|
This shows the text as part of the assertion message.
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
`t->values` does not necessarily represent a final value of the
transformation, as each mode treats this value differently.
So, unfortunately, we cannot have a generic offset solution for modal
transform operations. Offset needs to be handled by each mode.
Note: Currently only, `Move`, `Rotate` and `Resize` support this.
|
|
|
|
When activated in modal, `translate`, `resize`, `rotate`, `shear` and
`edge_rotate_normal` use a different orientation than the set in scene.
This orientation needed to match since some of these modes can be switched
during operation.
The default orientation for these modes was `V3D_ORIENT_VIEW`.
And this changed when finishing the `translate` and `resize` to
`V3D_ORIENT_GLOBAL`.
But this could cause inconsistencies when inputting values from the
keyboard.
The solution now is to change the orientation when you change the mode.
---
Note: Although the user can expect the value entered to reflect the
orientation set in the scene, it would require a lot of changes and would
not be really useful.
|
|
|
|
The "orient_matrix" parameter was only used when contraint was defined.
This change will hardly be noticed by the user, but it can be useful for
addon developers.
Possibly resolves T85734.
|
|
The constraint was not set when redoing.
This commit also removes `postInputRotation`. I really couldn't see a use for it.
|
|
Currently, `createTransData` is doing much more than the name implies.
This commit makes it clearer through smaller and more specific functions
what the real purpose of that function.
|
|
The local orientation chosen was that of the active object, but as
confirmed in other parts of the code, the orientation of the selected
Bone has priority.
|
|
Flags unified:
T_CURSOR -> CTX_CURSOR
T_TEXTURE -> CTX_TEXTURE
Flags moved:
T_CAMERA -> CTX_CAMERA
T_POSE -> CTX_POSE_BONE
T_OBJECT -> CTX_OBJECT
T_TEXTURE -> CTX_TEXTURE_SPACE
Flag renamed:
CTX_EDGE -> CTX_EDGE_DATA
|