Age | Commit message (Collapse) | Author |
|
This adds vertex creasing support for OpenSubDiv for modeling, rendering,
Alembic and USD I/O.
For modeling, vertex creasing follows the edge creasing implementation with an
operator accessible through the Vertex menu in Edit Mode, and some parameter in
the properties panel. The option in the Subsurf and Multires to use edge
creasing also affects vertex creasing.
The vertex crease data is stored as a CustomData layer, unlike edge creases
which for now are stored in `MEdge`, but will in the future also be moved to
a `CustomData` layer. See comments for details on the difference in behavior
for the `CD_CREASE` layer between egdes and vertices.
For Cycles this adds sockets on the Mesh node to hold data about which vertices
are creased (one socket for the indices, one for the weigths).
Viewport rendering of vertex creasing reuses the same color scheme as for edges
and creased vertices are drawn bigger than uncreased vertices.
For Alembic and USD, vertex crease support follows the edge crease
implementation, they are always read, but only exported if a `Subsurf` modifier
is present on the Mesh.
Reviewed By: brecht, fclem, sergey, sybren, campbellbarton
Differential Revision: https://developer.blender.org/D10145
|
|
Operator was erroneously starting edge_slide operation.
Revert part of the changes in rB3fab16fe8eb4 as obedit_type was being
confused with object_mode.
|
|
This is a micro-optimization that is useful for operators with many properties.
|
|
Ref T92709
|
|
The default orientation of the mode was being indicated as overridden,
although the one of constraint was used.
|
|
Conflicts:
source/blender/editors/transform/transform_generics.c
|
|
Silenciate warnings of usage of 'else' after 'return'
|
|
|
|
|
|
This reverts commit 717a971035071d36af03d65713408f4da1f69cb3.
|
|
This reverts commit 2a9cfdac7e126e37afb82e15a131717041f3d2f8.
|
|
This reverts commit 5e6fdaa07fff907e02b36813ccde0702bad4fb4d.
|
|
This reverts commit 1d1855e95f916685fed970904fc37701a4a0e031.
|
|
This feature has been desired for some time:
- https://rightclickselect.com/p/ui/Tqbbbc/allow-navigating-while-transforming (See comments);
- D1583;
- T37427;
In short, blocking navigation during transform limits the user to move the object only to visible areas within the screen and hinders the allocation of objects within closed meshes.
The node editor is also impaired because some nodes are far between them and the connectors are too small.
The only disadvantage of this patch (as I see it) is the conflict with the existing key map:
MIDDLEMOUSE:
- enable axis constrain in 3D view;
WHEELDOWNMOUSE, WHEELUPMOUSE, PAGEUPKEY, PAGEDOWNKEY:
- change the threshold of the proportional edit;
So the patch solution was to change these keymaps:
- MIDDLEMOUSE to Alt+MIDDLEMOUSE;
- WHEELDOWNMOUSE, WHEELUPMOUSE, PAGEUPKEY, PAGEDOWNKEY to Alt+(corresponding key);
When you use this new keymap for the first time in the proportional edit, it may seem strange due to the custom of using it (both in View2D and View3D).
But quickly the user gets used to it.
Alternatively we can add an option to the user preferences ([] Allow navigating while transforming). (I'm not much fan of this option).
The patch was done on branch2.8. But maybe it's a good idea to apply it to 2.79
Differential Revision: https://developer.blender.org/D2624
|
|
There should be a special `t->around` for this case, but for now let's
just avoid having the individual origins overlap.
|
|
The initialization of `t->around` and `t->view` was scattered and with
duplicate code
|
|
Support gimbal orientation for objects & bones.
|
|
Make the "xform" tool/gizmo available for strip transformations in the
sequencer preview window.
Because of the amount of hacks needed to make the gizmo work nicely with
multiple strips at the same time, it was decided to only show the
translate gizmo when multiple strips are selected.
This is because the transforms with multiple strips would appear buggy
because of our lack of shearing support in the transform system.
There is also currently no way to properly sync the gizmo drawing with
the transform when using multiple strips.
Reviewed By: Richard Antalik, Campbell Barton
Differential Revision: http://developer.blender.org/D12729
|
|
- Use 2D cursor in the preview space using shortcuts
matching the UV editor and 3D view.
- Add Cursor tool, cursor transform.
- Support for cursor and bound-box pivot.
- Add pivot pie menu.
|
|
Add tools for image manipulation in sequencer preview region.
This includes:
- Translate, rotate and resize operators, tools and gizmos
- Origin for image transformation
- Median point and individual origins pivot modes
- Select and Box select operator works in preview
- Image overlay drawing
ref T90156
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12105
|
|
This allows a hack to be removed that temporarily overwrote
the 3D views gizmo display flag.
Also reverse change from fb27a9bb983ce74b8d8f5f871cf0706dd1e25051
that runs poll on modal gizmo groups as there is some risk
that the poll function unlinks the gizmo.
|
|
Hiding viewport navigation gizmos caused the UI to "flicker"
unnecessarily, the axis could also be useful as a reference.
Resolves T73684
|
|
Caused by {rBb0d9e6797fb8}
Ideally `td->loc` should always be set and point to a 3d array.
|
|
- New operator property to toggle edge panning in the keymap:
This is disabled by default to avoid edge-panning in cases where it
gets distracting, such as adding a new node. Only the explicit
translate operator(s) (GKEY or drag) have this enabled now.
- Restore the initial view rect on edge pan cancel:
The initial view rect is now stored in the edge pan operator data.
When an operator with edge panning is cancelled it can now call the
`UI_view2d_edge_pan_cancel` function to restore the original View2D
rect.
- Less delay in node editor scrolling:
Delay is useful when scrolling through long lists, such as in the
outliner, but makes node scrolling feel sluggish and unresponsive.
The lower scroll speed here makes a faster response the better option.
- Zoom influence feature:
Somewhat slower scrolling in UI-space when zoomed out. With the 0.5
zoom influence factor nodes behave as if zoom factor is halved,
otherwise it gets too fast when zoomed out. Previously scrolling would
always be constant-speed in UI space, now it's half-way between UI
space and node (view) space.
|
|
The `recalcData` function is defined in `transform_convert.c`, so the
header is most expected to be `transform_convert.h`.
|
|
`t->obedit_type` is read to indicate if we are in uv edit mode.
Also fixes a crash introduced in {rBdd14ea18190ff27082009f73a556569a43377a71}.
|
|
|
|
This shows the text as part of the assertion message.
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
`t->values` does not necessarily represent a final value of the
transformation, as each mode treats this value differently.
So, unfortunately, we cannot have a generic offset solution for modal
transform operations. Offset needs to be handled by each mode.
Note: Currently only, `Move`, `Rotate` and `Resize` support this.
|
|
|
|
When activated in modal, `translate`, `resize`, `rotate`, `shear` and
`edge_rotate_normal` use a different orientation than the set in scene.
This orientation needed to match since some of these modes can be switched
during operation.
The default orientation for these modes was `V3D_ORIENT_VIEW`.
And this changed when finishing the `translate` and `resize` to
`V3D_ORIENT_GLOBAL`.
But this could cause inconsistencies when inputting values from the
keyboard.
The solution now is to change the orientation when you change the mode.
---
Note: Although the user can expect the value entered to reflect the
orientation set in the scene, it would require a lot of changes and would
not be really useful.
|
|
|
|
The "orient_matrix" parameter was only used when contraint was defined.
This change will hardly be noticed by the user, but it can be useful for
addon developers.
Possibly resolves T85734.
|
|
The constraint was not set when redoing.
This commit also removes `postInputRotation`. I really couldn't see a use for it.
|
|
Currently, `createTransData` is doing much more than the name implies.
This commit makes it clearer through smaller and more specific functions
what the real purpose of that function.
|
|
The local orientation chosen was that of the active object, but as
confirmed in other parts of the code, the orientation of the selected
Bone has priority.
|
|
Flags unified:
T_CURSOR -> CTX_CURSOR
T_TEXTURE -> CTX_TEXTURE
Flags moved:
T_CAMERA -> CTX_CAMERA
T_POSE -> CTX_POSE_BONE
T_OBJECT -> CTX_OBJECT
T_TEXTURE -> CTX_TEXTURE_SPACE
Flag renamed:
CTX_EDGE -> CTX_EDGE_DATA
|
|
The code takes many turns to get a suitable "target" for the snap to grid.
Perhaps there were other reasons awaited for `transformCenter_from_type`
and `TransCenterData center_cache[5]`.
But since nothing is defined, it is better to simplify the code.
No user functional changes
|
|
|
|
The rotation direction was flipped recently.
This meant that rotation on a single axis gave negative results compared
with previous Blender releases.
This partially reverts a9b53daf23ba8b6cb4c930e06154ffd35522b00d.
Differential Revision: https://developer.blender.org/D10299
|
|
This function is only being used by the constraint code.
|
|
Despite the wrong value, this change is harmless since the direction of
the vector is not really required.
|
|
engages axis-constraining on release"
This reverts commit c0677b662f4b13429c0738b99ace85403385ff38.
|
|
axis-constraining on release
Release confirm did not consider modal keymap events.
|
|
Some modes were always using `"Global"` orientation as the default.
|
|
Differential Revision: https://developer.blender.org/D8660
This patch is the result of the GSoC 2020 "Editing Grease Pencil Strokes
Using Curves" project. It adds a submode to greasepencil edit mode that
allows for the transformation of greasepencil strokes using bezier
curves. More information about the project can be found
here: https://wiki.blender.org/wiki/User:Filedescriptor/GSoC_2020.
|
|
The radius is now calculated based on the vertices being transformed
by proportional editing, updated when the falloff changes.
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
Improves the organization and identification of the API.
|