Age | Commit message (Collapse) | Author |
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
|
|
This reverts commit 717a971035071d36af03d65713408f4da1f69cb3.
|
|
'Snap Source'""""
This reverts commit 701f2dfd5bc61c0f37603880fa21abfe8b1d9620.
|
|
Source'"""
This reverts commit 25fa6c74b977ac983a34b9adf5ab2f20fe2f4932.
|
|
This reverts commit 2a9cfdac7e126e37afb82e15a131717041f3d2f8.
|
|
This reverts commit 5e6fdaa07fff907e02b36813ccde0702bad4fb4d.
|
|
This reverts commit 805181bffae647a24e939c651da72a08c5c2b7cb.
|
|
This reverts commit f19bd637e2c38b8b967944a88609a190b5179439.
|
|
This reverts commit 1d1855e95f916685fed970904fc37701a4a0e031.
|
|
This feature has been desired for some time:
- https://rightclickselect.com/p/ui/Tqbbbc/allow-navigating-while-transforming (See comments);
- D1583;
- T37427;
In short, blocking navigation during transform limits the user to move the object only to visible areas within the screen and hinders the allocation of objects within closed meshes.
The node editor is also impaired because some nodes are far between them and the connectors are too small.
The only disadvantage of this patch (as I see it) is the conflict with the existing key map:
MIDDLEMOUSE:
- enable axis constrain in 3D view;
WHEELDOWNMOUSE, WHEELUPMOUSE, PAGEUPKEY, PAGEDOWNKEY:
- change the threshold of the proportional edit;
So the patch solution was to change these keymaps:
- MIDDLEMOUSE to Alt+MIDDLEMOUSE;
- WHEELDOWNMOUSE, WHEELUPMOUSE, PAGEUPKEY, PAGEDOWNKEY to Alt+(corresponding key);
When you use this new keymap for the first time in the proportional edit, it may seem strange due to the custom of using it (both in View2D and View3D).
But quickly the user gets used to it.
Alternatively we can add an option to the user preferences ([] Allow navigating while transforming). (I'm not much fan of this option).
The patch was done on branch2.8. But maybe it's a good idea to apply it to 2.79
Differential Revision: https://developer.blender.org/D2624
|
|
This patch implements part of what was stated in {T66484}, with respect to `Base Point`.
## Introduction
The snapping feature of the transform tools has a variety of applications:
- Organization of nodes.
- Positioning of frames in precise time units.
- Retopology with snap to face
- Creation of armatures with bone positioning through the snap to volume
- Precise positioning of 3D or 2D objects in the surrounding geometry (CAD modeling)
The goal of this document is to make it more powerful for precision modeling and still supporting the old use cases without extra complexity.
The main topic addressed here is the introduction of a **interactive mode for setting a snap source** (See terminology).
## Terminology
* **Snap Source**: 3d coordinate * we want to snap from. (Currently defined by the `Snap With` options: `Closest`, `Center`, `Median` and `Active`).
* **Snap Target**: 3d coordinate* we want to snap to. (Vertices, Edges, Faces, Grid...)
## Interactive Mode for Editing a Snap Source
Currently the fixed snap point can only be obtained through the `Snap With` options. So it's a little tricky for the user to define a snap source point having so much geometry on an object.
Because of this, the user needs to resort to impractical solutions to get a point in the geometry.
See example of an impractical use:
{F11714181, layout=left, width=960, alt="The user used the cursor (which can be snapped) to choose the snap origin point."}
The user used the cursor (which can be snapped) to choose the snap source point.
While it is possible to work around this current limitation, it is important to reduce the number of steps and allow the user to set a snap source point through an optional interactive mode during a transformation.
The proposed solution is to be able to move the current snap source point through a modal modifier activated with a key (eg. B).
The snap source point can thus "snap" to the elements in the scene (vertex, mid-edge, Lamp, …) during this mode.
{F9122814, layout=left, width=960, alt="Base Point Snap, example of transform operation via the shortcut (not the tool). After pressing g and the snap base change shortcut (e.g., shift + ctrl) the user set the base point. The base point is then visible until the end of the operation. The z axis constrains the final position."}
## Implementation Details
- The feature will only be available in 3D View.
- The feature will only be available for `Move`, `Rotate` and `Scale` transform modes.
- The snap source editing will be enabled with a single click on the modifier key (B).
- Having a snap point indicated, the new snap origin point will be confirmed with the same buttons that confirms the transformation (but the transformation will not be concluded).
- The snap source editing can be canceled with the same key that activated it (B).
- If the transformation is done with "release_confirm" (common for gizmos), the new feature cannot be enabled.
- During the transformation, when enabling the feature, if the snap option is turned off in the scene, the snap will be forced on throughout the rest of the transformation (unless interactive mode is canceled).
- During a transformation, if no snap target is set for an element in the scene (Vertex, Grid...), the snap targets to geometry Vertex, Edge, Face, Center of Edge and Perpendicular of Edge will be set automatically.
- Snap cannot be turned off during the snap source editing.
- Constraint or similar modification features will not be available during the snap source editing.
- Text input will not be available during the snap source editing.
- When adding multiple snap points (A) the new prone snap source point will be indicated with an "X" drawing.
{F11817267}
Maniphest Tasks: T66484
Differential Revision: https://developer.blender.org/D9415
|
|
`t->values` does not necessarily represent a final value of the
transformation, as each mode treats this value differently.
So, unfortunately, we cannot have a generic offset solution for modal
transform operations. Offset needs to be handled by each mode.
Note: Currently only, `Move`, `Rotate` and `Resize` support this.
|
|
The `InputAngle` function uses a flawed algorithm to fix precision issues.
This commit refactor the logic of that function by using BLI utilities.
Differential Revision: https://developer.blender.org/D10880
|
|
As shown on the T85383, attempts are made to edit the precision mode key.
But that key was hardcoded.
That key now appears among the custom modal keymap items.
|
|
|
|
Corrects incorrect usages of the words 'then' and 'than'.
Differential Revision: https://developer.blender.org/D9246
Reviewed by Campbell Barton
|
|
Cleanup old tracker task format to the new. e.g: [#34039] to T34039
Ref D8718
|
|
Also order sizeof(..) first to promote other values to size_t.
|
|
The numbers in the redo panel were negated compared to the value
entered while transforming.
|
|
|
|
|
|
Both the MS headers and blender headers define the HKEY
which gives all kind of inclusion order issues.
This diff renames all *KEY constants to EVT_*KEY to resolve
this conflict.
Reviewed By: brecht , dfelinto
Differential Revision: http://developer.blender.org/D7164
|
|
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
|
|
|
|
This only impacts push-pull & shrink-fatten.
Flipping this matches zoom where moving the mouse cursor up
increases the zoom-level.
Previous behavior felt unnatural when adding gizmos to these tools.
|
|
There was a mix of old and new constants. Now have one list of WM_CURSOR_*
cursor types, using GHOST standard cursors when available and otherwise falling
back to our custom cursors.
Ref D5197
|
|
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Prevents clang-format wrapping text before comments.
|
|
|
|
Regression in 579c01da600dd
Move values_modal_offset use out of applyMouseInput
to resolve order of initialization issue.
|
|
|
|
|
|
Arrows are now shown for vertex/edge slide.
|
|
Redo trackball rotate and edge slide weren't working.
Caused by re-ordering of initialization 47de0321bf68c
|
|
574c0fe38f332bd97c588029c0075ecba1fe19cd caused complications
restoring the cursor.
Use WM_cursor_modal_set/restore which is intended for operator use,
calling ED_region_cursor_set after an operator runs isn't reliable.
|
|
|
|
|
|
|
|
Needed to redo extrude+transform macro w/o resetting the translation.
|
|
The hand doesn't have a hotspot which you might want using manipulators
|
|
|
|
Recent cursor changes stopped number button continuous grab.
|
|
|
|
Cursor can be a system one or drawn with OpenGL.
Before, dragging the transform manipulator would hide the cursor and reset it to the initial positon.
|