Age | Commit message (Collapse) | Author |
|
Differential Revision: https://developer.blender.org/D15616
|
|
Every caller BKE_image_find_nearest_tile was calculating the tile offset
so add a version of this function that returns the offset too.
|
|
No functional changes.
Prep for D15420 / T98061.
|
|
This commit adds a new face nearest snapping mode, adds new snapping
options, and (lightly) refactors code around snapping.
The new face nearest snapping mode will snap transformed geometry to the
nearest surface in world space. In contrast, the original face snapping
mode uses projection (raycasting) to snap source to target geometry.
Face snapping therefore only works with what is visible, while nearest
face snapping can snap geometry to occluded parts of the scene. This new
mode is critical for retopology work, where some of the target mesh
might be occluded (ex: sliding an edge loop that wraps around the
backside of target mesh).
The nearest face snapping mode has two options: "Snap to Same Target"
and "Face Nearest Steps". When the Snap to Same Object option is
enabled, the selected source geometry will stay near the target that it
is nearest before editing started, which prevents the source geometry
from snapping to other targets. The Face Nearest Steps divides the
overall transformation for each vertex into n smaller transformations,
then applies those n transformations with surface snapping interlacing
each step. This steps option handles transformations that cross U-shaped
targets better.
The new snapping options allow the artist to better control which target
objects (objects to which the edited geometry is snapped) are considered
when snapping. In particular, the only option for filtering target
objects was a "Project onto Self", which allowed the currently edited
mesh to be considered as a target. Now, the artist can choose any
combination of the following to be considered as a target: the active
object, any edited object that isn't active (see note below), any non-
edited object. Additionally, the artist has another snapping option to
exclude objects that are not selectable as potential targets.
The Snapping Options dropdown has been lightly reorganized to allow for
the additional options.
Included in this patch:
- Snap target selection is more controllable for artist with additional
snapping options.
- Renamed a few of the snap-related functions to better reflect what
they actually do now. For example, `applySnapping` implies that this
handles the snapping, while `applyProject` implies something entirely
different is done there. However, better names would be
`applySnappingAsGroup` and `applySnappingIndividual`, respectively,
where `applySnappingIndividual` previously only does Face snapping.
- Added an initial coordinate parameter to snapping functions so that
the nearest target before transforming can be determined(for "Snap to
Same Object"), and so the transformation can be broken into smaller
steps (for "Face Nearest Steps").
- Separated the BVH Tree getter code from mesh/edit mesh to its own
function to reduce code duplication.
- Added icon for nearest face snapping.
- The original "Project onto Self" was actually not correct! This option
should be called "Project onto Active" instead, but that only matters
when editing multiple meshes at the same time. This patch makes this
change in the UI.
Reviewed By: Campbell Barton, Germano Cavalcante
Differential Revision: https://developer.blender.org/D14591
|
|
into enums
The transformation snapping code contains a bunch of `#define`s, some ambiguously or incorrectly named attributes. This patch contains refactored code to improve this. This patch does (should) not change functionality of snapping.
Clarified ambiguously / incorrectly named attributes.
- "Target" is used to refer to the part of the source that is to be snapped (Active, Median, Center, Closest), but several other areas of Blender use the term "target" to refer to the thing being snapped to and "source" to refer to the thing getting snapped. Moreover, the implications of the previous terms do not match the descriptions. For example: `SCE_SNAP_TARGET_CENTER` does not snap the grabbed geometry to the center of the target, but instead "Snap transforamtion center onto target".
- "Select" refers to the condition for an object to be a possible target for snapping.
- `SCE_SNAP_MODE_FACE` is renamed to `SCE_SNAP_MODE_FACE_RAYCAST` to better describe its affect and to make way for other face snapping methods (ex: nearest).
Refactored related `#define` into `enum`s. In particular, constants relating to...
- `ToolSettings.snap_flag` are now in `enum eSnapFlag`
- `ToolSettings.snap_mode` are now in `enum eSnapMode`
- `ToolSettings.snap_source` (was `snap_target`) are now in `enum eSnapSourceSelect`
- `ToolSettings.snap_flag` (`SCE_SNAP_NO_SELF`) and `TransSnap.target_select` are now in `enum eSnapTargetSelect`
As the terms became more consistent and the constants were packed together into meaningful enumerations, some of the attribute names seemed ambiguous. For example, it is unclear whether `SnapObjectParams.snap_select` referred to the target or the source. This patch also adds a small amount of clarity.
This patch also swaps out generic types (ex: `char`, `short`, `ushort`) and unclear hard coded numbers (ex: `0`) used with snap-related enumerations with the actual `enum`s and values.
Note: I did leave myself some comments to follow-up with further refactoring. Specifically, using "target" and "source" consistently will mean the Python API will need to change (ex: `ToolSettings.snap_target` is not `ToolSettings.snap_source`). If the API is going to change, it would be good to make sure that the used terms are descriptive enough. For example, `bpy.ops.transform.translate` uses a `snap` argument to determine if snapping should be enabled while transforming. Perhaps `use_snap` might be an improvement that's more consistent with other conventions.
This patch is (mostly) a subset of D14591, as suggested by @mano-wii.
Task T69342 proposes to separate the `Absolute Grid Snap` option out from `Increment` snapping method into its own method. Also, there might be reason to create additional snapping methods or options. (Indeed, D14591 heads in this direction). This patch can work along with these suggestions, as this patch is trying to clarify the snapping code and to prompt more work in this area.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D15037
|
|
When interacting with translate/rotate/scale gizmo, show the gizmo while
it's in use. There are some exceptions to this, as showing all scale
gizmos while scaling causes the gizmos to become large & distracting so
in this case only the gizmo being dragged is shown.
Resolves T63743.
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
Caused by {rBb0d9e6797fb8}
For the header (both Graph Editor case in general `headerTranslation` as
well as `headerTimeTranslate`) we are interested in deltas values
(not absolute values).
Since culprit commit, `snapFrameTransform` was not working with deltas
anymore, but we have to compensate for this.
For the Graph Editor, this only worked "by accident" in rB7192e57d63a5,
since `ival` is still zero at this point.
So now, reacquire the delta right after the snap operation.
Also use a more appropriate center value in the translate operator.
Maniphest Tasks: T94191
Differential Revision: https://developer.blender.org/D13641
|
|
Also add groups in some files.
|
|
|
|
Missed in {rB0d36439f95c0}.
|
|
Variable was wrongly set to 0.
Caused by {rB7192e57d63a5}.
|
|
The header did not display the actual value when transforming with snapping
|
|
Abbreviations are harder to read and understand thus it is best to be direct.
For example without understanding and context it is hard to know exactly what "Len" means.
|
|
|
|
Supporting both object & edit-mode is more involved.
Both cases are now supported with object mode tracking the last-used
state for rotation so it's only reset once when rotation is disabled.
|
|
|
|
Use the term 'mat_final' for calculated matrices used for transforming.
Also rename 'pivot' to 'pivot_local'.
|
|
Multi-threading support for transform modes: bevel-weight, crease,
push-pull, rotate, shear, shrink-fatten, skin-resize, to-sphere,
trackball & translate.
This is done using a parallel loop over transform data.
From testing a 1.5million polygon mesh on a 32 core system
the overall performance gains were between ~20-28%
To ensure the code is thread-safe arguments to shared data are const.
Reviewed By: mano-wii
|
|
The `applySnap` callback of each mode was overwriting the value
calculated in `transform_snap_sequencer_apply`.
|
|
It wasn't so clear why the POINT_INIT check was disabled,
move this into the code comment.
|
|
of the header
This prevents the text from shaking while transforming.
|
|
`t->values` does not necessarily represent a final value of the
transformation, as each mode treats this value differently.
So, unfortunately, we cannot have a generic offset solution for modal
transform operations. Offset needs to be handled by each mode.
Note: Currently only, `Move`, `Rotate` and `Resize` support this.
|
|
|
|
This fixes T88346.
The code is also more readable by making a better distinction between
the texts used for Distances, "Proportional Size" and "AutoIK-Len".
And the text used to translate the "Proportional Size" is reused.
|
|
This makes it clearer that variables are strings and how they are used
in the Move header code.
|
|
Event though in practice this wasn't causing problems as the fixed size
buffers are generally large enough not to truncate text.
Using the result from `snprint` or `BLI_snprintf` to step over a fixed
size buffer allows for buffer overruns as the returned value is the size
needed to copy the entire string, not the number of bytes copied.
Building strings using this convention with multiple calls:
ofs += BLI_snprintf(str + ofs, str_len_max - ofs);
.. caused the size argument to become negative,
wrapping it to a large value when cast to the unsigned argument.
|
|
This fallback is an old hack.
It is difficult to have an orientation convention when several random
factors determine which one should be used.
In this case, to "fix" the problem, a new behavior had to be implemented.
Now the redo when moving the camera in `Camera View` has the default
orientation as `View`.
|
|
When activated in modal, `translate`, `resize`, `rotate`, `shear` and
`edge_rotate_normal` use a different orientation than the set in scene.
This orientation needed to match since some of these modes can be switched
during operation.
The default orientation for these modes was `V3D_ORIENT_VIEW`.
And this changed when finishing the `translate` and `resize` to
`V3D_ORIENT_GLOBAL`.
But this could cause inconsistencies when inputting values from the
keyboard.
The solution now is to change the orientation when you change the mode.
---
Note: Although the user can expect the value entered to reflect the
orientation set in the scene, it would require a lot of changes and would
not be really useful.
|
|
Flags unified:
T_CURSOR -> CTX_CURSOR
T_TEXTURE -> CTX_TEXTURE
Flags moved:
T_CAMERA -> CTX_CAMERA
T_POSE -> CTX_POSE_BONE
T_OBJECT -> CTX_OBJECT
T_TEXTURE -> CTX_TEXTURE_SPACE
Flag renamed:
CTX_EDGE -> CTX_EDGE_DATA
|
|
constraint
This partially reverts commit ad15e764dd92.
The local value is only useful with constraint.
|
|
Showing value in the global space was an unintentional change.
|
|
The incremental snap was always operating in the local space, which in most
cases is the VIEW type orientation.
Use only local space when the operation is affected by constraint.
Differential Revision: https://developer.blender.org/D10052
|
|
ratio
Caused by rB4eda60c2d82d.
T83801 reported not moving in pixel space, but even without that toggle
above commit caused the translation to not take apsect ratio into
account properly [a translation of 1 on the x axis for example on an
image with non 1:1 aspect ration caused the UVs to not end up in the
same place on the next 'tile']
Above commit removed 'removeAspectRatio()' [the counterpart of
applyAspectRatio -- which does the pixel coord correction internally]
from 'applyTranslation()'.
This was also reported in T83352 [which was closed by rBf3b08af24c9f --
but that only solved the displax in header, not the actual
transformation]
Now bring back 'removeAspectRatio()'.
Maniphest Tasks: T83801
Differential Revision: https://developer.blender.org/D9869
|
|
The displayed value was always that of the x axis.
|
|
The incremental was taking priority but the other elements are mandatory.
|
|
Follow our code style for doxygen sections.
|
|
This commit removes `t->snap[0]` and `t->snap_spatial[0]`.
They were not actually being used, and could add overhead for
transformation without snap.
|
|
`applyNumInput` does not write all axis values and does not consider
the orientation.
|
|
Regression introduced in rB546b900194f0
|
|
This commit renames the functions in "BKE_unit.h` to be consistent
with the naming in the rest of blenkernel.
bUnit_AsString -> BKE_unit_value_as_string_adaptive
bUnit_AsString2 -> BKE_unit_value_as_string
bUnit_ReplaceString -> BKE_unit_replace_string
bUnit_ApplyPreferredUnit -> BKE_unit_apply_preferred_unit
bUnit_ToUnitAltName -> BKE_unit_name_to_alt
bUnit_ClosestScalar -> BKE_unit_closest_scalar
bUnit_BaseScalar -> BKE_unit_base_scalar
bUnit_IsValid -> BKE_unit_is_valid
bUnit_GetSystem -> BKE_unit_system_get
bUnit_GetBaseUnit -> BKE_unit_base_get
bUnit_GetBaseUnitOfType -> BKE_unit_base_of_type_get
bUnit_GetName -> BKE_unit_name_get
bUnit_GetNameDisplay -> BKE_unit_display_name_get
bUnit_GetIdentifier -> BKE_unit_identifier_get
bUnit_GetScaler -> BKE_unit_scalar_get
bUnit_IsSuppressed -> BKE_unit_is_suppressed
Differential Revision: https://developer.blender.org/D8828
|
|
Now we have a better distinction of what is snap to grid and what is
snap to increments.
The code also allows the implementation of mixed snap for these modes.
|
|
It is preferable that the value used for interators is defined
close to where it is used.
|
|
|
|
Now all options for "snap to" affect the Vert Slide mode.
Reviewed By: campbellbarton
Maniphest Tasks: T66426
Differential Revision: https://developer.blender.org/D3440
|
|
These functions are very specific to the mode.
More modes can support snap, and there is no reason to keep all
callbacks for each mode in the transform_snap.c file.
|
|
clipping (even if the proportional edit itself is disabled)
Checking T_PROP_EDIT_ALL returns true for _any_ of the options, so just
check for T_PROP_EDIT.
Note: this might expand to other similar checks (e.g. header text)
Maniphest Tasks: T77068
Differential Revision: https://developer.blender.org/D7927
|
|
|
|
During the refactor of the transform operations, in an attempt to
maintain previous behavior, the default orientation of the translate
and resize operations became `Global` and the rotate operation became
`View`.
Now the default is always `View`, and on redo, the translate and rotate
operations are saved as `Global`.
|
|
Normal orientation
`pvec` was confusing and was adding steps that are apparently unnecessary.
So the code has been redone so as not to use this pvec.
|