| Age | Commit message (Collapse) | Author |
|---|
|
This caused an additional argument when exiting object modes
and many other low level functions which don't need to access context.
This simplifies fixing T77073.
|
|
Functionality here has become confusing over time,
this removes duplicate, similar functions, preferring to set the mode
instead of toggle, enter, exit.
Mode switching utility function behaved differently regarding undo,
'ED_object_mode_toggle' for example didn't skip the undo push
where 'ED_object_mode_set' did.
Some callers chose these functions based on the intended undo behavior,
even when toggling didn't make sense.
There was also ED_object_mode_generic_enter which was similar to
ED_object_mode_set, instead of the reverse of ED_object_mode_generic_exit.
Simplify object mode switching internals:
- Replace ED_object_mode_generic_enter with ED_object_mode_set.
- Remove ED_object_mode_toggle as nearly all callers needed to check
the current mode so toggling would set the mode argument correctly.
- Use ED_object_mode_set for the object mode switching operator
to simplify logic.
- Add ED_object_mode_set_ex which has an argument to disable undo,
needed when loading undo data needs to set the mode.
- Remove unused ED_object_mode_exit.
|
|
When local origins are used or a single control point is selected,
change the handle types from auto to aligned.
|
|
|
|
Move sample operator functions to `ed_util_imbuf.c` and change common functions,
so they can be used in image editor and sequencer.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D7315
|
|
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
|
|
These headers are not needed right away, but will be in the upcoming
commit.
|
|
Follow up of b2ee1770d4c3 and 10c2254d412d, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
Spatial & topology mirror table each used a single function
taking a char as an identifier.
Split these into begin/end/lookup functions.
|
|
Check for special ascii values for number input first so that we can
quickly decide if we should go into advanced mode.
Reviewed By: Bastien
|
|
|
|
|
|
Both the MS headers and blender headers define the HKEY
which gives all kind of inclusion order issues.
This diff renames all *KEY constants to EVT_*KEY to resolve
this conflict.
Reviewed By: brecht , dfelinto
Differential Revision: http://developer.blender.org/D7164
|
|
Caused by rB2d423479bdea.
Correct check for stroke being painted.
thx also to brecht checking.
|
|
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
|
|
|
|
This is a bug that the recent refactor exposed. Some widgets were drawing
with alpha set to 0.
|
|
- Remove the only_render arg from ED_editors_flush_edits
was only used in one place, the '_ex' version can be used instead.
- Split out the single object version of this function as currently
flushing is being done in-line, often only accounting for edit-mode,
ignoring sculpt mode for e.g.
|
|
BIF_gl.h included hacks like redefining glew functions and a constant.
The named constant `GLA_PIXEL_OFS` has been moved to `GPU_viewport.h`
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5860
|
|
Resolve linking issues, warnings.
|
|
Also correct some outdated symbol references,
add missing 'name' commands.
|
|
This introduces object mode tagging for data which hasn't yet been
written back to the ID data.
Now when selecting other sculpt objects, the original objects data is
flushed back to the ID before writing a memfile undo step.
|
|
|
|
Make a distinction between flush sculpt changes for rendering, and forcing
sculpt data structures to be rebuilt after mesh changes. Also don't use PBVH
for renders.
|
|
It is easier to deal with private values of the DRW_select engine and gives room for improvement.
Reviewers: campbellbarton, fclem
Differential Revision: https://developer.blender.org/D5415
|
|
`ED_view3d_select_id_read_rect` serves only as a bridge to `DRW_framebuffer_select_id_read`.
Keeping these codes similar only increases the complexity of some functions.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D5415
|
|
It is very similar to `ED_view3d_select_id_read_rect`.
|
|
T68035 by @luzpaz
|
|
This change ensures that operators which needs access to evaluated data
first makes sure there is a dependency graph.
Other accesses to the dependency graph made it more explicit about
whether they just need a valid dependency graph pointer or whether they
expect the graph to be already evaluated.
This replaces OPTYPE_USE_EVAL_DATA which is now removed.
Some general rules about usage of accessors:
- Drawing is expected to happen from a fully evaluated dependency graph.
There is now a function to access it, which will in the future control
that dependency graph is actually evaluated.
This check is not yet done because there are some things to be taken
care about first: for example, post-update hooks might leave scene in
a state where something is still tagged for update.
- All operators which needs to access evaluated state must use
CTX_data_ensure_evaluated_depsgraph().
This function replaces OPTYPE_USE_EVAL_DATA.
The call is generally to be done in the very beginning of the
operator, prior other logic (unless this is some comprehensive
operator which might or might not need access to an evaluated state).
This call is never to be used from a loop.
If some utility function requires evaluated state of dependency graph
the graph is to be passed as an explicit argument. This way it is
clear that no evaluation happens in a loop or something like this.
- All cases which needs to know dependency graph pointer, but which
doesn't want to actually evaluate it can use old-style function
CTX_data_depsgraph_pointer(), assuming that underlying code will
ensure dependency graph is evaluated prior to accessing it.
- The new functions are replacing OPTYPE_USE_EVAL_DATA, so now it is
explicit and local about where dependency graph is being ensured.
This commit also contains some fixes of wrong usage of evaluation
functions on original objects. Ideally should be split out, but in
reality with all the APIs being renamed is quite tricky.
Fixes T67454: Blender crash on rapid undo and select
Speculation here is that sometimes undo and selection operators are
sometimes handled in the same event loop iteration, which leaves
non-evaluated dependency graph.
Fixes T67973: Crash on Fix Deforms operator
Fixes T67902: Crash when undo a loop cut
Reviewers: brecht
Reviewed By: brecht
Subscribers: lichtwerk
Maniphest Tasks: T67454
Differential Revision: https://developer.blender.org/D5343
|
|
|
|
Avoid ambiguity with terms check & compare.
|
|
|
|
Gizmo group types now store a user count so they aren't unlinked
while other tools are using them.
The tool system now works with multiple windows.
|
|
This only handles the issue after file load.
To make it an all-around solution we need to deal with
this in ed_object_select_pick, do_outliner_item_activate_tree_element(),
...
|
|
Cheap tip: anything that is not "Camel Case" and/or that is more than
a few words long should use `TIP_` translation, not `IFACE_` one.
Also added several missing strings (including the one reported in D5056
by Jean First (@robbott), thanks).
|
|
Reviewers: brecht, sergey
Differential Revision: https://developer.blender.org/D5041
|
|
|
|
The previous fix 8a6414ed46f66, resolved selection picking but didn't
work for box/circle/lasso select.
- Add ED_select_buffer_utils.h for general select-buffer operations
unrelated to edit-mesh.
- Circle select still needs to cache select-id's for each update.
|
|
Also renames the corresponding .c file.
|
|
Prepare for enabling ReflowComments.
|
|
|
|
|
|
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
No functional change, this adds LIB definition and args to cmake files.
Without this it's difficult to migrate away from 'BLENDER_SORTED_LIBS'
since there are many platforms/configurations that could break when
changing linking order.
Manually add and enable WITHOUT_SORTED_LIBS to try building
without sorted libs (currently fails since all variables are empty).
This check will eventually be removed.
See T46725.
|
|
|
|
Use prefix now there isn't only the 3d version.
|
|
Convention was not to but after discussion on 918941483f7e we agree its
best to change the convention.
Names now mostly follow RNA.
Some exceptions:
- Use 'nodetrees' instead of 'nodegroups'
since the struct is called NodeTree.
- Use 'gpencils' instead of 'grease_pencil'
since 'gpencil' is a common abbreviation in the C code.
Other exceptions:
- Leave 'wm' as it's a list of one.
- Leave 'ipo' as is for versioning.
|
|
This causes other issues, revert for now until a better fix is found.
Reverts commit da1323d1c95095feff98e8aa054d73fd323c363d.
|
