Age | Commit message (Collapse) | Author |
|
The backdrop image gizmo was not following the backdrop image, it
needs to be refreshed whenever the view changes. The region init
callback is executed whenever the region size changes, so that should be
a reliable place to do that.
Reported as part of T87591.
|
|
In a collapsed hierarchy, some type of data are listed as one icon per
item (2.79 did this for all data),
others are 'compacted' as a single icon with a counter (also indicating
if the active item is down that collapsed hierarchy) from 2.80 on.
Not quite sure if {rB92dfc8f2673e} was meant to do this (if it was, this
was not working though because relevant code would only get executed for
object hierarchies it seems), so now this is done for bones as well.
Fixes T88413.
Maniphest Tasks: T88413
Differential Revision: https://developer.blender.org/D11404
|
|
|
|
|
|
Regression in 45d54ea67f9440d1c4ef89b3257ee92159de2599
|
|
Walk rotate speed for tablets was being modified at runtime by scaling
the user preference mouse_speed by a constant factor; this consolidates
scaling into the the compile time tablet scale factor in walkApply.
No change in behavior.
|
|
Accidentally included this in rB01e1944cd455, it came from a merge
conflict.
|
|
Comment was based on an older version of the patch.
|
|
When renaming an ID somewhere in the UI after marking it as asset, it would
often get lost in the Asset Browser (scrolled out of view). It would also get
deactivated.
This patch makes sure that if an asset is active whose ID gets renamed, it is
kept active and visible. That is important for a fast, uninterrupted asset
creation workflow, where users often rename assets while working in the asset
browser.
Old code stored the new file-name to identify a file after re-reading the
file-list after the rename. For assets that doesn't work because there may be
multiple assets with the same name. Here the simple solution of just storing
the pointer to the renamed ID is chosen, rather than relying on the file-name
in this case. (Should be fine with undo, since the ID * reference is short
lived, it's not stored over possible undo steps. If it turns out to have
issues, I rather switch to a rename_id_uuid, but keep that separate from the
file->uid).
Reviewed by: Sybren Stüvel
Differential Revision: https://developer.blender.org/D11119
|
|
(Note: This is an alternative version for D9994 by @Schiette. The commit
message is based on his description.)
Currently, when a new directory is created it is not selected.
Similarly, when renaming an existing file or directory, it does not
remain active/highlighted blue after renaming.
This change makes sure the file or directory is always selected after
renaming, even if the renaming failed or was cancelled.
This has some usability advantages:
- Open the newly created directory without having to select it (ENTER).
- If you make a naming mistake, you can immediately fix that (F2)
without having to click it again.
- If you create a directory and forget to name it, you can fix that
(F2) without having to select it.
- This is consistent with many common File Browsers.
Further, selecting the item even after renaming failed or was cancelled
helps keeping the file in focus, so the user doesn't have to look for it
(especially if the renaming just failed which the user may not notice).
In other words, it avoids disorienting the user.
Also see D11119 which requires this behavior.
We could also always select the file/directory on mouse press. This
would make some hacks unnecessary, but may have further implications. I
think eventually that's what we should do though.
|
|
`filesel.c` seems like the place that should contain file selection
functions. Previously it was in `file_ops.c` because that was the only
file that actually used it. But a followup commit needs it from a
different file.
|
|
Many ui features for geometry nodes need access to information generated
during evaluation:
* Node warnings.
* Attribute search.
* Viewer node.
* Socket inspection (not in master yet).
The way we logged the required information before had some disadvantages:
* Viewer node used a completely separate system from node warnings and
attribute search.
* Most of the context of logged information is lost when e.g. the same node
group is used multiple times.
* A global lock was needed every time something is logged.
This new implementation solves these problems:
* All four mentioned ui features use the same underlying logging system.
* All context information for logged values is kept intact.
* Every thread has its own local logger. The logged informatiton is combined
in the end.
Differential Revision: https://developer.blender.org/D11785
|
|
This issue happened because of some miscommunication during the original
patch review. Since we have the parent element in other outliner modes
(Blender File, Data API) I was on the fence here. Rolling this back now
so that when Show All View Layers is off we don't see the current View
Layer top element.
The fix is simple, but it was better to format the code around to
follow the style in this file.
Differential Revision: https://developer.blender.org/D11830
|
|
|
|
|
|
Use "Snap Playhead to Strips" option to enable playhead snapping.
Change behavior of CTRL key to invert snapping similar to transform operator.
Currently this option is disabled by default. It makes editing quite unpleasant
for me personally, but ideally I should gather feedback from more users.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D11745
|
|
Cache bar was only visible when Frame overlay was enabled
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11779
|
|
This patch horizontally centers the text inside the progress bar
widget. It is currently left-aligned and offset to the middle, which
doesn't center properly.
see D11205 for details and examples.
Differential Revision: https://developer.blender.org/D11205
Reviewed by Julian Eisel
|
|
The menu lists all socket types that are valid for the node tree.
Changing a socket type updates all instances of the group and keeps
existing links to the socket.
If changing the socket type leads to incorrect node connections the
links are flagged as invalid (red) and ignored but not removed. This is
so users don't lose information and can then fix resulting issues.
For example: Changing a Color socket to a Shader socket can cause an
invalid Shader-to-Color connection.
Implementation details:
The new `NODE_OT_tree_socket_change_type` operator uses the generic
`rna_node_socket_type_itemf` function to list all eligible socket types.
It uses the tree type's `valid_socket_type` callback to test for valid
types. In addition it also checks the subtype, because multiple RNA
types are registered for the same base type. The `valid_socket_type`
callback has been modified slightly to accept full socket types instead
of just the base type enum, so that custom (python) socket types can be
used by this operator.
The `nodeModifySocketType` function is now called when group nodes
encounter a socket type mismatch, instead of replacing the socket
entirely. This ensures that links are kept to/from group nodes as well
as group input/output nodes. The `nodeModifySocketType` function now
also takes a full `bNodeSocketType` instead of just the base and subtype
enum (a shortcut `nodeModifySocketTypeStatic` exists for when only
static types are used).
Differential Revision: https://developer.blender.org/D10912
|
|
Partially revert 7fc220517f87a2c40a4f438a50485233ae6ed62f, as it
introduced two issues:
- Deleting keys without active keying set was no longer possible, and
- there was no more confirmation popup.
Pressing {key Alt I} in the 3D Viewport now executes
`ANIM_OT_keyframe_delete_v3d`, adjusted to suit both T88068 and T89592:
- If there is an active keying set, delete keys according to that keying
set.
- Otherwise, behave as `ANIM_OT_keyframe_delete_v3d` did before, that
is, delete all keyframes of the selected object and in pose-mode also
of selected bones.
|
|
Remove duplicate code from the `ANIM_OT_keyframe_delete` operator. The
actions of the removed code are already performed by the preceding
`keyingset_get_from_op_with_error()` call.
No functional changes.
|
|
This option will determine visibility on either render or the viewport
visibility. Same for modifer settings. So it will either evaluate the
depsgrah with DAG_EVAL_RENDER or DAG_EVAL_VIEWPORT.
This not only makes it more flexible, it is also a lot
clearer which visibility / modfier setting is taken into account (up
until now, this was always considered to be DAG_EVAL_RENDER)
This option was always present in the USD exporter, this just brings
Alembic in line with that.
ref. T89594
Maniphest Tasks: T89594
Differential Revision: https://developer.blender.org/D11820
|
|
When introduced in {rB61050f75b13e} this was actually working (meaning
it checked the Outliner OB_RESTRICT_RENDER flag and skipped the object if
desired).
Behavior has since then been commented in rBae6e9401abb7 and apparently
refactored out in rB2917df21adc8.
If checked, it seemed to be working (objects marked non-renderable in
the Outliner were pruned from the export), however unchecking that
option did not include them in the export.
Now it changed - for the worse if you like - in rBa95f86359673 which
made it so if "Renderable Objects" only is checked, it will still export
objects invisible in renders. So since we now have the non-functional
option with a broken/misleading default, it is better to just remove it
entirely.
In fact it has been superseeded by the "Visible Objects" option (this
does the same thing: depsgraph is evaluated in render mode) and as a
second step (and to make this even clearer) a choice whether
Render or Viewport evaluation is used can be added (just like the USD
exporter has). When that choice is explicit, it's also clear which
visibility actually matters.
This is breaking API usage, should be in release notes.
ref. T89594
Maniphest Tasks: T89594
Differential Revision: https://developer.blender.org/D11808
|
|
Reserve the term count for values that require calculation
(typically linked lists).
|
|
|
|
Blender did not support to input East Asian characters (Chinese, Japanese,
Korean) on macOS. This patch adds support for Japanese input, by implementing
the appropriate processing for the NSTextInputClient protocol.
Technical notes:
* The conversion candidate window is drawn by the input method program calling
`firstRectForCharacterRange`.
* The string before confirmation (called `composite` in blender) is handled in
the `setMarkedText` method called by the input method program.
* The string after confirmation (called `result` in the blender) is processed
in the `insertText` method called by the input method program.
Ref T51283
Differential Revision: https://developer.blender.org/D11695
|
|
IME conversion candidate window was displayed at the mouse position, instead of
below the cursor or text selection.
Blender need to tell the input method program where the conversion candidate
window is during Japanese and Chinese input.
In macOS, the `firstRectforCharacterRange` is called when input by the input
method starts, and the position of the conversion candidate window is
specified. Therefore, it is necessary to set the position of the conversion
candidate window before input starts. This patch changes it so that the position
of the conversion candidate window is always set when the cursor is drawn.
Differential Revision: https://developer.blender.org/D11697
|
|
File Browser code uses the term "params" for its file selection parameters a
lot. Avoid confusion/ambiguity by calling the notifier listener parameters
"listener_params".
|
|
This operator only works with renaming files, not assets.
|
|
Split mesh restore logic into a new function:
`EDBM_redo_state_restore_and_free`.
|
|
When inserting text using IME on a button, the character after the cursor is
displayed before the cursor.
This bug seems to have occurred during the refactoring in D765.
Differential Revision: https://developer.blender.org/D11072
|
|
|
|
|
|
|
|
|
|
|
|
Code would manually do the same things in a couple of places, obvious case of
unnecessary code duplication.
|
|
|
|
|
|
|
|
This adds a viewer node similar to the one in the compositor.
The icon in the headers of nodes is removed because it served
the same purpose and is not necessary anymore.
Node outputs can be connected to the active viewer using
ctrl+shift+LMB, just like in the compositor. Right now this collides
with the shortcut used in the node wrangler addon, which will
be changed separately.
As of now, the viewed geometry is only visible in the spreadsheet.
Viewport visualization will be added separately.
There are a couple of benefits of using a viewer node compared
to the old approach with the icon in the node header:
* Better support for nodes that have more than one geometry output.
* It's more consistent with the compositor.
* If attributes become decoupled from geometry in the future,
the viewer can have a separate input for the attribute to visualize.
* The viewer node could potentially have visualization settings.
* Allows to keep "visualization points" around by having multiple
viewer nodes.
* Less visual clutter in node headers.
Differential Revision: https://developer.blender.org/D11470
|
|
Using BMesh operators through the edit-mesh API created a full copy
of the mesh so it was possible to restore the mesh in case
one of the operators raised an error.
Remove support for automatic backup/restore from the EDBM_op_* API's
as it adds significant overhead and was rarely used.
Operators that need this can use the BMBackup API to backup & restore
the mesh in case of failure.
Add warning levels to BMO_error_raise so operators can report problems
without it being interpreted as a request to cancel the operation.
For high-poly meshes creating and freeing a full copy is an expensive
operation, removing this gives a speedup of ~1.77x for most operators
except for "connect_verts" / "connect_vert_pair"
which still uses this functionality.
|
|
The evaluated meshes no longer store a copy of the edit-mesh
so tagging when a BMesh operator fails can be removed.
|
|
- Replace '[mce]' with "Mike Erwin".
- Remove references to turn-table author as it isn't useful information,
the author was credited in the commit message.
|
|
|
|
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
Also resolve a warning from the previous commit. The next blocker to
using const is `BKE_mesh_wrapper_ensure_mdata`.
|
|
|
|
This code was written for the File Browser together with the Asset Engine
design, that is not part of the Asset Browser/System design anymore. Updated
comments accordingly.
`FileDirEntryRevision` was actually used, but I removed it and moved the used
members to the parent `FileDirEntry`, since there is no concept of revisions
currently.
There should be no functional changes.
|