| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Add smooth scrolling support for vertical scrolling.
This is only active while scrolling so we don't need to support
pixel-level offsets for operators, interactions.
|
|
|
|
When introducing "drag-all-selected" support all over Blender, we
figured this wouldn't work well with the Graph Editor
selection/transform behavior.
Hence, William and I worked on the following changes, although we used
this chance to improve the behavior in general too.
For more info see T70634.
* Handles now always move with the key, regardless if they are selected
or not.
* Selecting the key doesn't select the handles anymore, their selection
is separate.
* Multiple keys and handles can now be dragged.
* Dragging a handle moves all selected handles **on the same side**.
* Tweak-dragging any handle can never affect any keyframe location,
only handles.
* G/R/S should behave as before.
* Changing the handle type with a key selected always applies the change
to both handles.
* Box selection with Ctrl+Drag now allows deselecting handles (used to
act on entire triple only).
* Box selection //Include Handles// option now only acts on visible
handles, wasn't the case with Only Selected Keyframes Handles enabled.
* Box selection //Include Handles// is now enabled by default in all
bundled keymaps.
The changes have been tested for some days by the animators here in the
Blender Animation Studio. Some changes are based on their feedback.
Also, this improves/adds comments for related code.
Differential Revision: https://developer.blender.org/D6235
Reviewed by: Sybren Stüvel, William Reynish
|
|
`BLI_strncpy_wchar_from_utf8` internally assumes `wchar_t` is 32 bits
which is not the case on windows.
The solution is to replace `wchar_t` with `char32_t`.
Thanks to @robbott for compatibility on macOS.
Differential Revision: https://developer.blender.org/D6198
|
|
Only indent when there aren't characters before the cursor.
This resolves the conflict with Ctrl-Space for view maximize.
D6239 by @wbrbr for text editor, based console support on this.
|
|
|
|
Previously the only way to draw polygon shapes from buttons
was to use a polygon that included the circular outline
with negative space for the un-filled areas.
This didn't always have visibility, especially when the gizmo was
overlaying colors that didn't contrast much.
Support drawing a generic backdrop with a polygon shape over it.
|
|
The term suggestions on it's own is too ambiguous, use BKE_text prefix.
|
|
The term mirror on it's own is too ambiguous, use BKE_mesh prefix.
|
|
|
|
I forgot to change the old BLI_task functions for the new BKE_pbvh
functions in Topology Slide/Relax.
|
|
After adding normal radius, the main use of the Scrape brush is to create flat surfaces with sharp edges. In that case, it does not make sense to have our current "Peaks" version of the brush as its inverted version.
The correct inverted version of Scrape for this use case is the Fill brush. This way you can use this tool to crease both concave and convex sharp edges and to fix the artifacts one version produces with its inverted version.
I think we should merge these two tools into one, but for now, this solution keeps compatibility with the old behavior.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6022
|
|
This commit implements the Topology Slide/Relax brush and the Relax mesh filter.
These tools are designed to move the topology on top of the mesh without affecting the volume.
The Topology Slide/Relax brush slides the topology of the mesh in the direction of the stroke. When pressing shift, it has an alternative smooth mode similar to the Relax Brush in the sculpt branch. It should be way more stable and produce fewer artifacts.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6059
|
|
The smooth iterations of the pose factor were hardcoded to 4. This works fine in most situations when you are posing a low poly mesh, which is the main use case of this tool. I added the smooth iterations as a brush property in case you need to pose a high poly mesh directly without producing artifacts.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6157
|
|
This operator is similar to Mask Extract, but it deletes the masked points on the original mesh and fills the holes. This can be useful for quickly trimming or splitting an object.
This is not meant to be the main trimming tool of sculpt mode. I plan to have a set of trimming tools based on geometry booleans (trim box, lasso, line, bisect...) but in some cases doing a mask selection is more convenient.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6160
|
|
The Multiplane Scrape brush creates sharp edges with a given fixed angle by trimming the mesh with two planes in local space at the same time. When working with stylized or hard surface models, this brush produces way better results and is more predictable than any other crease/flatten brush based on curves and alphas.
It is also the first brush we have than can produce hard surface concave creases.
The Multiplane Scrape Brush also has a dynamic mode where it samples the surface to fit the angle and scrape planes during a stroke. With this mode enabled you can sculpt multiple times over the same edge without creating artifacts.
It can also create creases that change between concave and convex during the same stroke.
The behavior of this brush will improve after merging patches like D5993 and its behavior in concave creases can still be improved, so I will keep tweaking its parameters and default values once we have all brush properties available.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6174
|
|
After refactoring the mirror modifier and supporting geometry modifications with PBVH_FACES this operator can be easily implemented without Dyntopo.
i
The symmetrize button and options are still in the Dyntopo pannel. There are patches like doing multiple modifications in the Sculpt mode UI, so we need to find a way to organize this better.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6180
|
|
The previous Clay brush was similar to flatten. Now it has a different plane calculation and falloff, based on the position of the vertices before deforming them, so it feels more like adding clay to the model.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6228
|
|
By squaring the pen pressure and disabling BRUSH_SPACE_ATTEN the brush
feels like it has a bigger strength range, wich makes it easier to
control when applying less pressure in order to smooth sculpted
surfaces.
Each brush should have a custom input pressure curve by default to get
an optimal behaviour and make all brushes consistent, but that is going
to take some time to get it right.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6214
|
|
Dash Ratio and Dash Samples are brush properties to modify the strength of the brush during a stroke. This is useful to create dashed lines in texture paint or stitches in sculpt mode.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D5949
|
|
One of the corrections from last cleanup was wrong.
|
|
Caused by rBac442da4a14d.
Above commit tweaked the logic to not only early out, but also set the
WPGradient_vertStore screen coord to FLT_MAX in case this original index
was visited before [gradientVertInit__mapFunc].
For generative modifiers though, we might get here multiple times for the
same orig index, resulting in a valid orig index being made invalid for
gradientVertUpdate__mapFunc [which would early out in case of FLT_MAX].
Restored original logic, so that setting FLT_MAX only really happens
when it should: when ED_view3d_project_float_object fails...
Maniphest Tasks: T68499
Differential Revision: https://developer.blender.org/D6282
|
|
Also remove unused vars.
|
|
Keyframes) takes hidden keys into account when calculating zoom
Note that with the 'View Only Selected Curve Keyframes' option enabled,
it is also possible to select [box/circle/lasso] hidden/non-visible
keyframes. Think this should never happen, but that is for a later
commit (along some deduplication of animdata filtering code)
Reviewed By: Severin, Sybren
Maniphest Tasks: T67873
Differential Revision: https://developer.blender.org/D6237
|
|
|
|
Previously these used a gizmo to redo the operator however this
complicated having on-screen gizmos to access tools (see T66304).
Replace this with a generic way to make an operator that only has an
execute function into a modal operator.
This is used for smooth and randomize tools.
Unlike operator gestures, this handles storing and resetting the data.
Currently this only handles edit-mode data, however it's can be
extended to other kinds of data.
|
|
Allows to access/transform/restore edit-mode
coordinates in a generic way.
|
|
Added a animation curve decimate operator in the graph editor
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D4841
|
|
Custom profiles in bevel allows the profile curve to be controlled by
manually placed control points. Orientation is regularized along
groups of edges, and the 'pipe case' is updated. This commit includes
many updates to comments and changed variable names as well.
A 'cutoff' vertex mesh method is added to bevel in addition to the
existing grid fill option for replacing vertices.
The UI of the bevel modifier and tool are updated and unified.
Also, a 'CurveProfile' widget is added to BKE for defining the profile
in the interface, which may be useful in other situations.
Many thanks to Howard, my mentor for this GSoC project.
Reviewers: howardt, campbellbarton
Differential Revision: https://developer.blender.org/D5516
|
|
Various small changes to Text Editor, mostly to do with scaling, alignment, and theme support.
Differential Revision: https://developer.blender.org/D6268
Reviewed by Campbell Barton
|
|
|
|
The issue was actually in Python extras (where it shows the ENUM option).
I got a bit distracted by the "(undocumented operator)" message.
It made me miss the missing ENUM once the crash was gone.
|
|
This was introduced on 9ca2cbdcea6a.
|
|
For the make single user operation to work we expect a parent of the
datablock to be around. However this is often not the case when not
accessing the data from Scenes or Viewlayer display modes.
For now we simply not show them in the other cases. They can be added
later though, by testing the outliner tree parent compatibility with the
expected parent id.
Fix T71673
Differential Revision: https://developer.blender.org/D6276
|
|
We have no dedicated image context tab, so for now making sure we don't
end up passing its ID as the pinned one.
If we ever get one, we then will need a different solution here, like
changing the ID that owns the data to be the object, instead of the
empty image datablock.
Differential Revision: https://developer.blender.org/D6273
|
|
rBc6cbcf83d015 caused to early out e.g when not all faces were selected
(but surrounding faces were, so implicitly all vertices were selected).
Now take (mixed also) selection mode into account.
Maniphest Tasks: T71554
Differential Revision: https://developer.blender.org/D6254
|
|
|
|
|
|
|
|
|
|
Regression since 2.80, see: T71434
|
|
|
|
2.79 also did this [select the new instances] which was useful.
2.79 also kept the instancer selected [this patch deselects]
Reviewed By: mont29
Maniphest Tasks: T68191
Differential Revision: https://developer.blender.org/D6233
|
|
|
|
|
|
|
|
|
|
|
|
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D6260
|
