| Age | Commit message (Collapse) | Author |
|---|
|
The commit rB6f63417b500d that made exact boolean work on meshes
with holes (like Suzanne) unfortunately dramatically slowed things
down on other non-manifold meshes that don't have holes and didn't
need the per-triangle insideness test.
This adds a hole_tolerant parameter, false by default, that the user
can enable to get good results on non-manifold meshes with holes.
Using false for this parameter speeds up the time from 90 seconds
to 10 seconds on an example with 1.2M triangles.
|
|
|
|
Because the search didn't run when the menu first opens, the attributes
appeared in a different order than after you typed anything into the
search field. This commit instead runs the search when the menu
is first opened, but it only sorts items without filtering.
|
|
Not needed anymore since 3a907e742507.
|
|
Continuation of work in 2e221de4ceee and 249e4df110e0 .
This prepares things so we can start porting the individual ID types to
the new code design. I already added some code for library IDs, because
they need some special handling during construction, which I didn't want
to break.
The `AbstractTreeElement::isExpandValid()` check can be removed once
types were ported and can be assumed to have a proper `expand()`
implemenation.
Also makes `TreeElementGPencilLayer` `final` which I forgot in
e0442a955bad.
|
|
Mistake in aa3a4973a30f. The expanded `ELEM()` check would include
`0 && te->idcode != 0`, which always evaluates to `false`/`0`. That
wouldn't cause the asset to fail, but the `te->idcode` part would never
be checked.
Fixed the error and cleaned up the check against "0" with a check
against `TSE_SOME_ID`, see b9e54566e3b1a.
|
|
Code to check if the Outliner tree-element type was the general ID one
would always check against "0" (explicity or even implicitly). For
somebody unfamiliar with the code this is very confusing. Instead the
value should be given a name, e.g. through an enum.
Adds `TSE_SOME_ID` as the "default" ID tree-element type. Other types
may still represent IDs, as I explained in a comment at the definition.
There may also still be cases where the type is checked against "0". I
noted in the comment that such cases should be cleaned up if found.
|
|
Use _fn as a suffix for callbacks.
|
|
Add an RNA function `activate_asset_by_id(asset_id: ID, deferred: bool)`
to the File Browser space type, which intended to be used to activate an
asset's entry as identified by its `ID *`. Calling it changes the active
asset, but only if the given ID can actually be found.
The activation can be deferred (by passing `deferred=True`) until the
next refresh operation has finished. This is necessary when an asset has
just been added, as it will be loaded by the filebrowser in a background
job.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10549
|
|
Continuation of work in 2e221de4ceee and 249e4df110e0. Now the tree-element
types have to be ported one by one. This is probably the most straight forward
type to port.
|
|
Gave warning on Windows platform. There are more of these cases.
|
|
|
|
Reserve `event` for wmEvent.
|
|
|
|
Following naming convention of most operators.
|
|
Now, if the Autokey is not enabled, a new frame is not created and it is used the last active one. If no active frame, a message is displayed and the operation is canceled.
This is a common request for 2D artists.
Also, grease pencil was not working as Blender does in other areas.
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D10557
|
|
The `MAX_LIBARRAY` define was an annoying doublon to the `INDEX_ID_MAX` enum value
now defined in `DNA_ID.h`, and it is no more useful.
And comments were somewhat outdated. Also added an explanation about
chosen order for the `INDEX_ID_<IDTYPE>` order.
|
|
Pasting nodes can create new id relations, because nodes can reference IDs.
Therefore the depsgraph has to be updated when nodes are pasted.
We could somehow check if the pasted nodes referenced IDs, but I'm not sure
if this complexity is worth it.
|
|
|
|
Use event modifier checks that follow most of Blender's code.
|
|
|
|
|
|
|
|
|
|
None of these properties can be animated, so it doesn't make sense
to leave space for decorators on the right side of the panels. In fact
that is what was intended, but they were not manually disabled
in all of the panels.
|
|
Because pressing enter will choose the current search item from the menu,
and there was no search item with an empty string, it was impossible to
clear the text of an attribute text field. This commit adds a simple "X"
icon in the top row when you delete the string.
|
|
This commit exposes the strings used in the node error messages for
localization. It also changes the message tooltip creation to
automatically add the period at the end, to be more consistent with
the (arguably bad) design of other tooltips in Blender.
Calling `TIP_` directly in the node implementation files allows us to
continue using `std::string` concatenation instead of passing variadic
arguments. It's also more explicit about which part of the message is
translated and which isn't. The files already include the translation
header anyway.
|
|
Warnings:
* readability-inconsistent-declaration-parameter-name
* readability-redundant-smartptr-get
|
|
Can use const parameter.
|
|
Warning: else-after-return/break
|
|
|
|
The `bNodeLinkDrag` struct was NULL when dragging a node instead of
a link. It is allocated with `calloc` anyway, so this field doesn't
need to be explitely cleared.
|
|
The socket drag operator stored the index of the last picked socket
into RNA in case the mouse cursor leaves the link while dragging.
This id was not unique which is why sometimes a link from an other node
with the same id is picked.
This patch changes the way the last picked link is stored and stores a
pointer to the link directly into bNodeLinkDrag struct instead.
Differential Revision: https://developer.blender.org/D10590
|
|
Also use doxygen comments for sculpt functions.
|
|
The Python API for the curve mapping widget offers the `update`
function, but no way to reset the view to the clipping rectangle.
This commit adds a blenkernel function for this operation,
and exposes it to the CurvMapping RNA API. This allows addons
to display a more user-friendly view of the data in this widget.
Differential Revision: https://developer.blender.org/D10561
|
|
This commit adds a search for existing attributes when you click
on an attribute field. This is useful because otherwise you have
to remember which attributes should be available at each node in
the tree.
The fundamental complication is that this information is not
accessible statically. So the search data is only a cache from
the previous node tree evaluation. The information is added
with `BKE_nodetree_attribute_hint_add`, currently for every
input geometry socket for a single node.
This is only an initial implementation, and later versions will
expose the data type and domain of the attributes.
Differential Revision: https://developer.blender.org/D10519
|
|
I landed D10527 in rB1a8aee0a7cec accidentally, and the version there was
missing a name change discussed in review. This commit just renames the
boolean variable controlling the special behavior for attribute search.
Original message meant for this change:
For geometry nodes we will use search buttons to display a list of
attributes available the last time the node tree was executed (D10519).
Because this list is just a hint, we need to be able to enter any string,
not just strings from the search items.
This patch adds a boolean option to string buttons to enable this.
The change is quite simple, changes to behavior are only required in
two places. The type-specific button struct changes help a lot here.
Differential Revision: https://developer.blender.org/D10527
|
|
In Blender, we used to use the term 'draw' to refer to information
displayed to the user. For version 2.80, it was decided to change these
instances to 'display' instead. This was to avoid the ambiguity between
end-user drawing tools and display options.
From the Oxford English Dictionary:
- Draw: produce (a picture or diagram) by making lines and marks on
paper with a pencil, pen, etc.
- Display: show (data or an image) on a computer, television, or
other screen.
Therefore, we should use draw when referring to drawing tools for
making marks, but use display when referring to information
shown/displayed to the user. From a user POV, the computer displays
certain information, whereas the user draws a mark.
Apparently this change was not implemented consistently, so this patch
changes all remaining relevant instances of "draw".
Differential Revision: https://developer.blender.org/D10551
|
|
Currently when you open an RNA collection search button, like a
vertex group selector, the search filter isn't applied until you
start typing, in order to display every option at the start.
Otherwise they wouldn't be visible, since the search filter would
run for the current text.
Currently this check happens in one place, but it relies on the
`changed` value of `uiBut`. This is fine in the interface directory,
but anywhere else it would require exposing `uiBut.changed`, which
is probably too low-level to expose.
The solution is adding an `is_first` argument to the search callbacks,
which is nice for a few reasons:
- They work at a higher level of abstraction, meaning they don't
have to worry about how exactly to tell if this is the first
search.
- It makes it easier to do special behavior when the search menu
is first opened.
- Then, obviously, it makes that state accessible without including
`interface_intern.h`.
Needed for attribute search: T85658
Differential Revision: https://developer.blender.org/D10528
|
|
Expand is a new operator for Sculpt Mode which is intended to be the main
tool for masking, Face Set editing, interacting with the filters and pattern
creation.
The fundamentals of the tool are similar to the previous sculpt.mask_expand
operator. It shares the same default shortcuts and functionality, making
the previous operator obsolete.
The shortcuts to execute the operator are:
- Shift + A: Expand mask
- Shift + Alt + A: Expand mask by normals
- Shift + W: Expand Face Set
- Shift + Alt + W: Resize current Face Set
The main changes compared to the previous sculpt.mask_expand operator are:
- Modal keymap, all operator options can be changed in real time while the
operator is running.
- Supports creating Mask, Face Sets and Sculpt Vertex Colors.
- Much better code, new features can be easily integrated.
Limitations:
- All Mask operations are supported for Sculpt Vertex colors, but not exposed
by default as their support is still experimental.
- Dyntopo does not support any Face Set or Sculpt Vertex Colors. functionality
(they are not implemented in general for Dyntopo).
- Multires does not support any feature related to geodesic distances.
- Multires does not support vertex colors.
- Multires does not support recursions.
- In Multires, Face Sets snaping does not initialize all current enabled Face
Sets when toggling snapping.
- In Multires, Face Sets are created at base mesh level (works by this by
design, like any other tool).
- Unlike the previous mask_expand operator, this one does not blur the mask
by default after finishing Expand as that does not fit the new design.
The mask can still be blurred by using the mask filter manually.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10455
|
|
|
|
Move low level logic to module code and versioning logic to versioning code.
Metas strip position was handled in diffrent way compared to other strips.
This was introduced in c8b0d25794be as bugfix for T28158.
I disagree with such design. Meta strips should be handled in same way as
any other strips.
I have tested this change and haven't found any problems.
No problems after checking T28158 as well.
There should be no functional changes on user level.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D9972
|
|
Isolate RNA and operator logic from functions that create strips.
- Operator specific code was removed from `SeqLoadInfo` structure and
`SEQ_add_*` functions.
- Strip loading code was removed from RNA and operator functions.
- `SEQ_add_*` API was unified to work on `SeqLoadData` struct.
Only exception is image strip, which require files to be loaded
separately to strip creation itself. This is not ideal, but I think
it's acceptable.
- Some functions and variables were refactored so the code reads
better.
There are minor functional changes (coincidental bugfixes):
- Operator errors are reported per-strip. Previously they were not
reported at all?
- `new_sound()` RNA API function now create sound with length of 1
if source file does not exist. Previously it created strip with
length of 0.
- Replace selection operator property wasn't working correctly.
Fixed in this patch.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9760
|
|
This enables the quick access button [to show the relevant Texture in
the Properties Editor] for textures used in geometry nodes.
This goes in line to what we do for other textures:
- modifier textures have this button
- particle textures have this button
- brush textures will soon have it, too (see D9813)
When outside of the Properties Editor, the button will always show (if a
texture is actually assigned), but will be inactive if no suiting
Properties Editor to show the texture in can be found.
Note this also changes the behavior to not show the button if _no_
texture is assigned (as in: we are still showing the "New" button).
Previously it was always there (e.g. for modifier textures), even if it
would take us to an empty texture tab. (Sure, we could add a texture
there then, but imho it makes more sense to just start showing it once a
texture is already there)
For this to work with geometry nodes, the following chages were done:
- implement foreachTexLink for geonode modifiers
- new buttons_texture_user_node_property_add() that stores prop as well
as node
- also use NODE_ACTIVE_TEXTURE flag in geometry nodetrees
notes:
- this still uses the first suiting (as in: pinning does not interfere)
Properties Editor it finds, this should (maybe?) find the _closest_
Property Editor instead (see related feedback in D9813).
- this will already show the button for brush textures as well
(disabled), but there is another mandatory change in an upcomming commit
to make it work there as well (see D9813)
ref. T85278
Maniphest Tasks: T85278
Differential Revision: https://developer.blender.org/D10293
|
|
That way the header can be included in C++ files.
|
|
Move some drawing code from `area.c` and `ed_util.c` into `ed_draw.c`.
This is to support the new generic slider that wil be used in T81785.
No functional changes.
Reviewed By: #animation_rigging, #user_interface, Severin, sybren
Maniphest Tasks: T81785
Differential Revision: https://developer.blender.org/D9313
|
|
|
|
Simply disable advanced 're-use current blend data` process when loading
a memfile step and Global Undo is disabled, since there is no way to
ensure we have a proper 'differential' state in the stack then.
NOTE: this is a quick work-around to fix the crash, not a satisfying
solution by far (pretty sure there can still be crashes if you then
re-enable Global Undo afterwards e.g.).
|
|
The constraint was not set when redoing.
This commit also removes `postInputRotation`. I really couldn't see a use for it.
|
|
When a GP object was parented to e.g. a bone, box selection as well as
point selection were broken in that the selection from the user would
not correlate with what was actually being selected.
The issue was that box and point selection did not use the active
evaluated stroke data. The fix uses the correct data.
Reviewed By: antoniov
Maniphest Tasks: T85987
Differential Revision: https://developer.blender.org/D10555
|
