| Age | Commit message (Collapse) | Author |
|---|
|
Probably to prevent the radius of a point from being stuck at zero,
the `Shrink/Fatten` curve operator sets a minimum value of `0.001`
for all points being transformed.
This is an inconvenience as these points may have been purposely set
to zero on the panel.
And it also doesn't follow the convention seen in other operators
(which keep the value zero).
So remove this limitation.
|
|
Add a 'Delete Confirmation' operator property to the 'Delete Marker'
operator. This determines whether the user is asked to confirm the
deletion or not.
Defaults so that only {key X} ({key Backspace} for industry compatible
keymap) prompts for deletion, whereas {key Del} does not show the
confirmation popup.
This also makes the default keymap for marker deletion consistent with
the common delete operators (such as objects and keyframes).
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D13818
|
|
In UV edge mode, box and lasso selections allow edge selections only
when the entire edge is contained within the selection area. This
doesn't consider any edges that partially overlap with the selection
area.
This is now fixed by adding a second pass, similar to how these
operators work for edit-mesh selections. Now if both operators are
unable to find any edges contained within the selection area, then
they will perform a second pass which checks for edges that partially
intersect with the selection area.
Now edge selection in the UV editor matches edit-mesh edge-selection
when drawing wire-frame.
Resolves T99443.
Ref D15362
|
|
|
|
|
|
|
|
Note there is a bug in BKE_object_is_visible_in_viewport, it
returns false when the object is in local mode.
The transform operator poll should do a similar test. That
would allow us to move the test from sculpt_brush_strok_invoke
to SCULPT_mode_poll (at the moment we cannot do this due to
the brush operator falling through to the translate keymap
item in global view3d keymap).
|
|
|
|
In some cases it is mandatory to be able to hide parts of the mesh
in order to paint certain areas. The Mask modifier doesn't work in
weight paint, and edit mode hiding requires using selection, which
is not always convenient.
This makes the weight and vertex paint modes always respect edit mode
hiding like sculpt mode. The change in behavior affects drawing and
building paint PBVH. Thus it affects brushes, but not menu operators
like Smooth or Normalize.
In addition, this makes the Alt-H shortcut available even without
any selection enabled, and implements Hide for vertex selection.
Differential Revision: https://developer.blender.org/D14163
|
|
|
|
Currently, there are two attribute API. The first, defined in `BKE_attribute.h` is
accessible from RNA and C code. The second is implemented with `GeometryComponent`
and is only accessible in C++ code. The second is widely used, but only being
accessible through the `GeometrySet` API makes it awkward to use, and even impossible
for types that don't correspond directly to a geometry component like `CurvesGeometry`.
This patch adds a new attribute API, designed to replace the `GeometryComponent`
attribute API now, and to eventually replace or be the basis of the other one.
The basic idea is that there is an `AttributeAccessor` class that allows code to
interact with a set of attributes owned by some geometry. The accessor itself has
no ownership. `AttributeAccessor` is a simple type that can be passed around by
value. That makes it easy to return it from functions and to store it in containers.
For const-correctness, there is also a `MutableAttributeAccessor` that allows
changing individual and can add or remove attributes.
Currently, `AttributeAccessor` is composed of two pointers. The first is a pointer
to the owner of the attribute data. The second is a pointer to a struct with
function pointers, that is similar to a virtual function table. The functions
know how to access attributes on the owner.
The actual attribute access for geometries is still implemented with the `AttributeProvider`
pattern, which makes it easy to support different sources of attributes on a
geometry and simplifies dealing with built-in attributes.
There are different ways to get an attribute accessor for a geometry:
* `GeometryComponent.attributes()`
* `CurvesGeometry.attributes()`
* `bke::mesh_attributes(const Mesh &)`
* `bke::pointcloud_attributes(const PointCloud &)`
All of these also have a `_for_write` variant that returns a `MutabelAttributeAccessor`.
Differential Revision: https://developer.blender.org/D15280
|
|
This commit doesn't implement any new feature but makes the new curves
object type no longer experimental.
Documentation:
* https://docs.blender.org/manual/en/3.3/modeling/curves/primitives.html#empty-hair
* https://docs.blender.org/manual/en/3.3/sculpt_paint/curves_sculpting/introduction.html
Note: This also makes the Selection Paint tool available. This tool
should have been moved out of the "New Curves Tool" flag when we got the
selection drawing to work.
Differential Revision: https://developer.blender.org/D15402
|
|
Curves that are attached to a surface can now follow the surface when
it is modified using shape keys or modifiers (but not when the original
surface is deformed in edit or sculpt mode).
The surface is allowed to be changed in any way that keeps uv maps
intact. So deformation is allowed, but also some topology changes like
subdivision.
The following features are added:
* A new `Deform Curves on Surface` node, which deforms curves with
attachment information based on the surface object and uv map set
in the properties panel.
* A new `Add Rest Position` checkbox in the shape keys panel. When checked,
a new `rest_position` vector attribute is added to the mesh before shape
keys and modifiers are applied. This is necessary to support proper
deformation of the curves, but can also be used for other purposes.
* The `Add > Curve > Empty Hair` operator now sets up a simple geometry
nodes setup that deforms the hair. It also makes sure that the rest
position attribute is added to the surface.
* A new `Object (Attach Curves to Surface)` operator in the `Set Parent To`
(ctrl+P) menu, which attaches existing curves to the surface and sets the
surface object as parent.
Limitations:
* Sculpting the procedurally deformed curves will be implemented separately.
* The `Deform Curves on Surface` node is not generic and can only be used
for one specific purpose currently. We plan to generalize this more in the
future by adding support by exposing more inputs and/or by turning it into
a node group.
Differential Revision: https://developer.blender.org/D14864
|
|
This patch adds (selected/active) outline around a curve object in object mode.
{F13270680}
In the past the draw bounds option was enabled for any curve objects. With this
patch it isn't needed and will be disabled.
In the future the curve outline could also be enabled to improve GPU selection.
Reviewed By: dfelinto, HooglyBoogly, fclem
Maniphest Tasks: T95933
Differential Revision: https://developer.blender.org/D15308
|
|
It's helpful to make the separation of legacy data formats explicit,
because it declutters actively changed code and makes it clear which
areas do not follow Blender's current design. In this case I separated
the `MFace`/"tessface" conversion code into a separate blenkernel
.cc file and header. This also makes refactoring to remove these
functions simpler because they're easier to find.
In the future, conversions to the `MLoopUV` type and `MVert`
can be implemented here for the same reasons (see T95965).
Differential Revision: https://developer.blender.org/D15396
|
|
Also move mis-placed doc-string.
|
|
|
|
Use the image user from the image editor to correctly get the frame in the
operators. Based on patch by Nicolas (john-g-h-doe) with changes by me.
Differential Revision: https://developer.blender.org/D15380
|
|
This is temporary to investigate which behavior should be kept when
creating an override hierarchy if there are no cherry-picked data
defined: make all overrides user-editable, or not.
This removes the 'make override - fully editable' menu entries.
|
|
Followup to the previous commit, to display a pin icon in the scene switcher.
This is a good indicator to have and such workspace-wide functionality should
be available in the topbar, close to what it belongs to (scene switching).
Downside is that it makes this already crowded region even more crowded. But
thanks to the use of superimposed icons, it's not too noisy visually.
Differential Revision: https://developer.blender.org/D11890
Reviewed by: Campbell Barton
|
|
Adds a "Pin Scene" option to the workspace. When activated, the workspace will
remember the scene that was last activated in it, so that when switching back
to this workspace, the same scene will be reactivated. This is important for a
VSE workflow, so that users can switch between different workspaces displaying
a scene and thus a timeline for a specific task.
The option can be found in the Properties, Workspace tab. D11890 additionally
adds an icon for this to the scene switcher in the topbar.
The workspace data contains a pointer to the scene which is a UI to scene data
relation. When appending a workspace, the pointer is cleared.
Differential Revision: https://developer.blender.org/D9140
Reviewed by: Brecht Van Lommel, Bastien Montagne (no final accept, but was fine
with the general design earlier)
|
|
Because children point to, or "use" their parent, the Library Overrides
Hierarchies mode in the Outliner would show parents contained in children, not
children contained in a parent. See D15339 for pictures.
In production files this would make the rig listed under all its children, so
it would appear many times in the tree. Now it appears once and the children
are collected under it.
Refactors the tree building, so instead of using
`BKE_library_foreach_ID_link()`, it now uses the ID relations mapping in
`MainIDRelations`.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15339
|
|
The only real improvement is avoiding some reference counting,
but the main for the change is consistency. Also don't move a
StringRef, since that doesn't own any data anyway.
|
|
As documented in the best practices section of the style guide:
https://wiki.blender.org/wiki/Style_Guide/Best_Practice_C_Cpp
|
|
This may lead to improved performance from multithreading as well.
|
|
The spreadsheet ignored the component choice in the data set region
for curves and volume objects, and the original curves data-block wasn't
retrieved from the original object.
|
|
Adding Grease Pencil keyframes in the dopesheet (rB92d7f9ac56e0) lead to
crashes from the NLA editor (T99505). This is now resolved, by removing
grease pencil keyframes from NLA editor (as it was in 3.2), and
filtering them out of all NLA-related operations.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D15391
|
|
Fix T99453.
Crash due to null pointer access.
So wrap the function call in simple `if` check
Reviewed By: sybren
Maniphest Tasks: T99453
Differential Revision: https://developer.blender.org/D15370
|
|
This is already done inside of `attribute_search_add_items`.
|
|
The new name makes more sense in non-node-related contexts.
|
|
This commit adds visualization to the selection in curves sculpt mode.
Previously it was only possible to see the selection when it was
connected to a material.
In order to obstruct the users vision as little as possible, the
selected areas of the curve are left as is, but a dark overlay
is drawn over unselected areas.
To make it work, the overlay requests the selection attribute and then
ensures that the evaluation is complete for curves. Then it retrieves
the evaluated selection GPU texture and passes that to the shader.
This reuses the existing generic attribute extraction system because
there currently wouldn't be any benefits to dealing with selection
separately, and because it avoids duplication of the logic that
extracts attributes from curves and evaluates them if necessary.
Differential Revision: https://developer.blender.org/D15219
|
|
This crashed because in `get_active_fcurve_channel`, the filter did not
filter out channels with no fcurve.
The fix adds the filter `ANIMFILTER_FCURVESONLY`.
See rB92d7f9ac56e0ff1e65c364487542dfb7c32a0a67 for the new filter.
Maniphest Tasks: T99491
Differential Revision: https://developer.blender.org/D15386
|
|
Regressed in the following commit due to an inverted conditional:
{rB1159b63a07fd2cbc7fc48e162d57721c9c85b3f6}
Differential Revision: https://developer.blender.org/D15389
|
|
The falloff was applied to scale by error. Now, the falloff is only applied to the rotation.
Differential Revision: https://developer.blender.org/D15364
.
|
|
|
|
When in Object Mode, any of the active- and edit-related snapping
options (Include Active, Include Edited, Include Non-Edited) should be
ignored when in Object Mode, otherwise snapping could be effectively
disabled.
This commit forces snap code to ignore the active- and edit-related
options when in Object Mode.
Reviewed By: Germano Cavalcante (mano-wii)
Differential Revision: https://developer.blender.org/D15366
|
|
Previous code was doing N collection syncs when duplicating N objects.
New code avoids all the intermediate syncs by using
BKE_layer_collection_resync_forbid and
BKE_layer_collection_resync_allow, and then does one
BKE_main_collection_sync + BKE_main_collection_sync_remap for the
whole operation. There is some complexity involved where the Base
things of newly duplicated objects can't be found yet, without the
sync, so some work on them (marking them selected, active, ...) has
to be deferred until after the sync.
Timings: scene with 10k cubes, each with unique mesh (Windows, VS2022
Release build, AMD Ryzen 5950X):
- Shift+D duplicate: 13.6s -> 9.2s
- Alt+D duplicate: 4.76s -> 1.53s
Reviewed By: Bastien Montagne
Differential Revision: https://developer.blender.org/D14150
|
|
The brush transform was not applied to the view direction.
|
|
Caused by [0] which made accessing the drag-start require a function
instead of being the value written into the event cursor coordinates.
[0]: b8960267dd51f9108b3b49e9b762e6b4d35ae1dc
|
|
Usual same issue with outliner operations, where you apply it on one
item, and then try to apply it again on same item listed somewhere else
in the tree...
Fixed by using the 'multi-tagged deletion' code we now have for IDs,
that way tree-walking function just tags IDs for deletion, and they all
get deleted at once at the end.
|
|
|
|
This makes it possible to use this function without having
to call an operator. This is currently used by D14864.
|
|
|
|
This utility struct is useful outside of sculpting code as well.
|
|
Change the behavior of the "Frame start" and [Frame] "End" fields of an
NLA Strip in the NLA editor.
Frame Start now behaves like translating with {key G} and moving the
mouse. It also updates the Frame End to ensure the strip remains the
same length.
Frame End changes the length of the strip, based on the Repeat property.
If there are no repeats (i.e. number of repeats = 1) the underlying
Action will change length, such that more or less of its keyframes will
be part of the NLA strip. If there are repeats (i.e. number of repeats
smaller or larger than 1), the number of repeats will change. Either
way, the effective end frame off the strip will be the one set in the
Frame End slider.
The old behavior of stretching time has been removed. It is still
possible to stretch time of a strip, but this no longer automatically
happens when manipulating the Frame Start and Frame End sliders.
**Technical details:** new RNA properties `frame_start_ui` and
`frame_end_ui` have been added. Changing those values (for example via
the sliders, but also via Python) trigger the above behavior. The
behavior of the already-existing `frame_start` and `frame_end`
properties has been simplified, such that these can be set from Python
without many side-effects, simplifying import of data into the NLA.
Reviewed By: sybren, RiggingDojo
Differential Revision: https://developer.blender.org/D14658
|
|
|
|
|
|
This was reported as part of D15219 but it is a problem in master, not
in the patch.
EEVEE is drawing with a cheap sampling when navigating or painting, but
we need to clear the painting flag when we are done painting.
For a rainy day: DRW_state_is_navigating() should be renamed to indicate
that it also checks for the painting flag.
|
|
The problem was the last point had the original point, but the previous one not, so the loop ends before checking last point.
The solution is avoid the loop exist if the function is checking the previous point before last one.
|
|
|
