| Age | Commit message (Collapse) | Author |
|---|
|
Now if a user presses the knife tool undo key when there are no more cut segments to undo, the operator exits. Previously, it did nothing.
|
|
|
|
|
|
|
|
This should not be allowed in general, added some initial call to check
when user is allowed to delete a data to search for mandatory override
usages...
|
|
Own mistake when making NLA overridable, instead of assuming things
about the ID owner of the animation data being processed, properly
return and use the one found by `ED_actedit_animdata_from_context`.
|
|
Use dashes to represent the function flow (while keeping continuous
lines for the data-flow).
It is important to tell both flows apart (the data and the function
flow). The sockets help with that, the noodles help this further.
The "data flow" is evaluated at every single node. A user can inspect
the output sockets of those nodes and have a glimpse at their values.
The "function flow" (nodes) however is only evaluated in the geometry
nodes. The noodles are not transporting data in the same sense of the
"data flow". All that can be inspected are the attributes the functions
depend on.
Having this clearly communicated should help users to inspect the
nodetrees, read and understand the different flows in the same tree.
---
Known limitations:
At the moment the dash lines are not equidistant:
* It would be nice to get the "uv.x" to be resampled for the bezier curve
so the dashes are equally distributed in the curve.
* Using distance between the P3 and P0 instead of the real bezier curve
length seems to be fine.
---
Full disclaimer:
Changes with that much of a visual impact tend to be controversial. So
far the main feedback is that dashed lines can be associated to broken
link, and that there are better ways to represent the flows (or
different information that should be visually represented).
I'm fully aware of that. However dashed lines are already used in the
viewport and outliner to indicate (hierarchical) relation. Besides,
other approaches (double-lines, having the data flow to be more
distinct, ...) didn't pan out in the end (or didn't look as good as
this).
---
Impact in other editors:
The compositor uses mostly a "data flow" nodetree, so no change is
expected there.
The shader nodetree is one that could but doesn't have to change its
visual language.
The shader nodetree uses mostly "function flow" with some "data flow" nodes.
One can argue that it should be adapted to follow the
same pattern as geometry nodes (with the new noodles and the diamond
sockets). Oh the other hand, a shader nodetree has a single context.
When a node depends on the "UV", there is only one UV at a time for the
entire nodetree. So it can also be treated as a psedo "data flow"
nodetree if we want to avoid too many changes in other parts of Blender.
Differential Revision: https://developer.blender.org/D12602
|
|
NLA and Dope Sheet use a specific transform operation to scale.
Unlike the conventional resize operation, `TIME_SCALE` operates on `td->val`.
This is a bit outside the convention of transform operators.
The expected thing in this case would be to work in `td->loc` and use the conventional resize operator.
But for now, to fix the problem, use `td->loc` in the `TIME_SCALE` operation.
This commit also brings a cleanup in the style of some comments and removing unnecessary `memset`.
|
|
The Clear Asset operator (`ASSET_OT_clear`) now clears the Fake User.
This makes it symmetrical with the Mark Asset (`ASSET_OT_mark`)
operator, which sets Fake User to ensure assets are always saved to
disk.
Clear Asset now also has a `set_fake_user` boolean option, which allows
users to Clear Asset and set Fake User in one go.
The asset browser now shows these options in the context menu:
- Clear Asset: also clears Fake User. This makes it possible to actually
remove assets from the blend file without leaving the Asset Browser.
- Clear Asset (Set Fake User): keeps the Fake User bit set. This makes
it possible to "hide" the asset from the asset browser, without
loosing the actual data.
Internally, the `ED_asset_clear_id(id)` function now always clears the
Fake User bit. If it was intended that this bit was kept set, it's up to
the caller to explicitly call `id_fake_user_set(id)` afterwards.
Manifest Task: T90844
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12663
|
|
Noticed by @david_black in D12392, thx!
|
|
As the title says
Reviewed By: lichtwerk, campbellbarton
Differential Revision: https://developer.blender.org/D12665
|
|
Currently the Drivers Editor shows this (the blue thing can be dragged
to change frame):
{F10647661}
But the Drivers Editors X axis is the output of the driver [which can be
further tweaked by the curve] not time(frame).
So it seems better to not mix them here, it is just confusing to have
two different units on one axis.
Especially since what we really want to look at in X (the drivers output
value) can be in a totally unrelated range compared to frames, so e.g.
we might be interested in a drivers range from 0.0 to 1.0 and a
framerange of 100 to 200, so putting this on one axis just does not make
sense. Better to use a separate timeline for this.
Note 2.79 also did not do this.
Maniphest Tasks: T91157
Differential Revision: https://developer.blender.org/D12392
|
|
When "Show Cursor" is unchecked, the Drivers Editor would still display
the vertical line representing the cursor x.
Probably overseen in {rB65072499c65a} (historically the vertical line
could represent either the current frame of the cursor X in drawing, but
this is now much more separate).
There is no point in seeing part of the cursor in the Drivers Editor if
this is disabled.
Also correct outdated comments.
ref. T91157
Maniphest Tasks: T91157
Differential Revision: https://developer.blender.org/D12391
|
|
Labels in headers reserved space for an icon even when no icon was used.
This is caused by the shared function ui_text_icon_width adding 1.5x
a buttons X-units width the the width of the string.
Menu buttons detected this and subtracted the extra padding.
Instead of adding the same workaround for labels,
add ui_text_icon_width_ex that takes a padding argument.
Add presets for 'default', 'compact' and 'none' to avoid duplicating
padding values.
This allows removal of hard-coded label scaling for the add-object tool.
|
|
While World data has always been able to be marked as an asset, there
was no way to actually use them from the asset browser. This change
allows users to drag-drop world assets onto the Viewport and have them
appended/linked to their scene.
Differential Revision: https://developer.blender.org/D12566
|
|
Basically this enables the select-tweaking behavior as per the
guidelines:
https://wiki.blender.org/wiki/Human_Interface_Guidelines/Selection#Select-tweaking.
We use this in most other other editors that allow selecting and
dragging multiple items. But besides the consistency improvement, this
is important if we want to support dragging multiple assets (or files)
in future. We want to support this at least for dragging multiple assets
into an asset catalog for the upcoming asset catalog UI.
|
|
that are assigned to particle systems/hair.
`BKE_object_material_slot_used` would only check obdata usages, but
particle settings can also (weirdly enough) use objects' material slots.
So now, as its name suggests, `BKE_object_material_slot_used` does take
an object as parameter, and also checks for potential slot usage from
psys in the object.
|
|
This makes it easier to spot which links contain fields and which
contain data. Actually, the patch makes all other links a bit thicker.
However, with soon-to-be-implemented theme changes, the
perceived thickness will be the same as before.
This is part of T91563.
Differential Revision: https://developer.blender.org/D12646
|
|
Mistake in own {rB69893ef27c91}.
Was mixing screen on region coordinates.
|
|
|
|
|
|
Whilst in pose-mode, the selection filter only includes other objects in
pose-mode instead of the object selection.
This makes sense as the selection of the pose bones what the user as
acting on in the 3D view.
The object selection only makes sense to use in object mode.
Reviewed By: sybren
Maniphest Tasks: T81922
Ref D12494
|
|
This adds the ability to cancel out of the roll using ESC or RMB
(which is not common for viewops -- but makes sense in the case of roll
I think). This resets the view as well as potential locked cameras to
the original orientations (but does not remove potential autokeys --
which no transform does on cancel btw.)
Maniphest Tasks: T89883
Differential Revision: https://developer.blender.org/D12582
|
|
Since its introduction in {rB5c569d227b64}, the view roll was based on
horizontal movement only. Using a "real" angle not only feels more
natural but also has the benefit of getting more precission the further
away from the center you are (just like regular rotation, brush/stencil
rotation etc.). A similar thing has already been implemented in the
Grease Pencil Tools Addon, now make the blender standard roll the same.
Since this is not using the transform system, we are still lacking a
line in the viewport (this could be added but since this is always based
on the center of the view we dont necessarily need this), as well as the
additional Shift-extra-precission behavior.
Fixes T89883
Maniphest Tasks: T89883
Differential Revision: https://developer.blender.org/D12582
|
|
|
|
The events value was checked without checking the expected modal state.
|
|
Crash happened due to NULL dereference. Add NULL checks.
|
|
A small quality of life improvement that will allow users to change the keys used for axis locking.
|
|
Don't draw image overlay in timeline, image manipulation only works in
preview.
|
|
Until now, the asset catalogs would only show up after all assets from
the library were loaded. Now the catalogs are read first, which makes
them appear pretty much immediately. This makes the UI more responsive
and feel less heavy.
I added a dedicated file-list type for asset libraries now. While not
necessarily needed, I prefer that so asset library specific stuff can be
handled in there.
|
|
This adds initial limited support for socket tooltips. It's limited
in a couple of ways for now:
* Only works when hovering over the socket shape, not when hovering
over the value in the socket.
* Only works for built-in nodes that already use the new node
declaration system. This can later be extended to support pynodes.
Those limitations are well worth it for now, given that the
implementation is quite simple and the impact on usability is quite
large. More complex updates to the layout system, that would allow
showing socket tooltips in the nodes, can be done later. With the
current implementation we can at least start writing tooltips for
geometry nodes now.
This commit already adds tooltips for the Cylinder node as an example.
Differential Revision: https://developer.blender.org/D12607
|
|
The `ui_list` lookup from 87c1c8112fa44ccb94a3e996b7499d6577d85d7f
didn't account for the region being unset.
|
|
|
|
|
|
When Browsing libraries the asset files were opened multiple times.
once to determine the needed groups to query and once for each
group to query the items in the group. For file browsing this makes sense
but for asset browsing this can be reduced.
This patch will load the asset files recursively and only opens them once.
Another change is that only the assets are requested and not filtered out
later in the process.
This patch is needed to simplify the library indexing. Where
we need access to the full library content.
## The numbers ##
Benchmarked by adding scenes of the spring open movie to the default
asset library. Refreshing the asset library would recursively load all the files
there.
| **8bc27c508a** | Processed 317 'directories/libraries' | 7.573986s |
| **Patch** | Processed 42 'directories/libraries' | 0.821013s |
{F10442811}
Reviewed By: mont29, Severin
Maniphest Tasks: T91406
Differential Revision: https://developer.blender.org/D12499
|
|
|
|
This implements the update logic for the vizualization of which
sockets pass data or constants directly, and which pass functions.
The socket shapes may still have to be updated. That should be
done separately, because it might be a bit more involved, because
socket shapes are currently linked to keyframe shapes. Currently
the circle and diamond shapes are used with the following meanings:
- Input Sockets:
- Circle: Required to be a single value.
- Diamond: This input supports fields.
- Output Sockets:
- Circle: This output is a single value.
- Diamond: This output may be a field.
Connecting a field to a circle input socket is an error, since a
field cannot be converted to a single value. If the socket shape
is a diamond with a dot in the middle, it means it is currently
a single value, but could be a field.
In addition to socket shapes, the intention is to draw node links
differently based on the field status. However, the exact method for
conveying that isn't decided yet.
Differential Revision: https://developer.blender.org/D12584
|
|
header for std::function was not included
reported/fixed by Charlie on chat
|
|
|
|
This follows three main targets:
* Make creation of new tree UIs easy.
* Groundwork to generalize tree UIs (so e.g. Outliner, animation
channels, asset catalogs and spreadsheet data-sets don't have to
re-implement basic tree UI code) or even other data-view UIs.
* Better separate data and UI state. E.g. with this, tree-item selection
or the open/collapsed state can be stored on the UI level, rather than
in data. (Asset Catalogs need this, storing UI state info in them is
not an option.)
In addition, the design should be well testable and could even be
exposed to Python.
Note that things will likely change in master still. E.g. the actually
resulting UI isn't very nice visually yet.
The design is documented here:
https://wiki.blender.org/wiki/Source/Interface/Views
Differential Revision: https://developer.blender.org/D12573
|
|
No functional change.
The shader is complicated by itself, having hardcoded values makes it
even more cryptic.
I also renamed the shader because the shader is not for the keyfarme diamond only,
but for all the keyframe shapes.
Differential Revision: https://developer.blender.org/D12615
|
|
Choosing a UV layer would actually affect the overlay in the viewport
and also painting with the mask brush was in that UV space, but the
resulting stencil mask was always applied with the active UV (not the
explicitly selected stencil UV -- the one one is looking at in the
viewport!) to painting.
This has been like that as far as I have checked back (at least 2.79b),
I am surprised this has not come up before, but it does not seem to make
sense at all...
Now use the UV specified for the stencil layer when applying the mask for
painting, so it corresponds to the stencil mask one is looking at in the
viewport.
Maniphest Tasks: T91557
Differential Revision: https://developer.blender.org/D12583
|
|
Catalogs work like directories on disk (without hard-/symlinks), in that
an asset is only contained in one catalog.
See T90066 for design considerations.
#### Known Limitations
Only a single catalog definition file (CDF), is supported, at
`${ASSET_LIBRARY_ROOT}/blender_assets.cats.txt`. In the future this is
to be expanded to support arbitrary CDFs (like one per blend file, one
per subdirectory, etc.).
The current implementation is based on the asset browser, which in
practice means that the asset browser owns the `AssetCatalogService`
instance for the selected asset library. In the future these instances
will be accessible via a less UI-bound asset system.
The UI is still very rudimentary, only showing the catalog ID for the
currently selected asset. Most notably, the loaded catalogs are not
shown yet. The UI is being implemented and will be merged soon.
#### Catalog Identifiers
Catalogs are internally identified by UUID. In older designs this was a
human-readable name, which has the problem that it has to be kept in
sync with its semantics (so when renaming a catalog from X to Y, the
UUID can be kept the same).
Since UUIDs don't communicate any human-readable information, the
mapping from catalog UUID to its path (stored in the Catalog Definition
File, CDF) is critical for understanding which asset is stored in which
human-readable catalog. To make this less critical, and to allow manual
data reconstruction after a CDF is lost/corrupted, each catalog also has
a "simple name" that's stored along with the UUID. This is also stored
on each asset, next to the catalog UUID.
#### Writing to Disk
Before saving asset catalogs to disk, the to-be-overwritten file gets
inspected. Any new catalogs that are found thre are loaded to memory
before writing the catalogs back to disk:
- Changed catalog path: in-memory data wins
- Catalogs deleted on disk: they are recreated based on in-memory data
- Catalogs deleted in memory: deleted on disk as well
- New catalogs on disk: are loaded and thus survive the overwriting
#### Tree Design
This implements the initial tree structure to load catalogs into. See
T90608, and the basic design in T90066.
Reviewed By: Severin
Maniphest Tasks: T91552
Differential Revision: https://developer.blender.org/D12589
|
|
There is no reason to lock behavior into a specific configuration in
those calls, make them properly configurable like the rest of the
link/append code.
This also enable users of those functions to activate 'ID reuse'
behavior.
|
|
|
|
This adds constrained angle mode improvements,
snapping to global and local orientation,
visible distance and angle measurements,
undo capability,
x-ray mode,
multi-object edit mode.
See https://developer.blender.org/D12600 for more details.
Note: this project moved some of the default keymappings
around a bit, as discussed with users in the thread
https://devtalk.blender.org/t/gsoc-2021-knife-tool-improvements-feedback/19047
We'll change the manual documentation in the next couple of days.
|
|
|
|
The old modifier had two modes, but it is better to keep separated as meshes.
The UI has changed to be more consistent, including a new column type of modifiers.
Note: The logic has not changed with the previous version of the modifier, just is a split on two modifiers..
Reviewed By: mendio, pablovazquez
Differential Revision: https://developer.blender.org/D12586
|
|
Adds a new operator to the pose slider tools that blends the
current pose with the neighbouring poses in the timeline.
The operator can be called in pose mode with Shift+Alt+E
or from the "pose" menu under "In betweens/Blend to Neighbour"
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9137#inline-105214
Ref: D9137
|
|
core code.
Outliner tree building code abuse the `ID.newid` pointer to store non-ID
data. While this is bad and should be fixed at some point, for the time
being at the very least do not use ID BKE API to deal with this pointer
in that specific case, this needs its own proper code.
|
