Age | Commit message (Collapse) | Author |
|
|
|
collision
|
|
|
|
|
|
|
|
|
|
MEM_SAFE_FREE isn't necessary when the memory is known to be allocated
and clearing the value afterwards isn't necessary.
|
|
|
|
|
|
|
|
Differential Review: https://developer.blender.org/D15618
|
|
No functional changes.
Add casts required by C++. Simplify types.
|
|
|
|
The `DefaultMixer` for mixing generic data types has some issues:
1. The full buffer is always zeroed, even if only some is used.
2. Finalizing also works on all values, even if only some are used.
3. "mixing" doesn't allow setting the first value, requiring that
everything is cleared beforehand.
This commit adds the following functionality:
1. Constructor with the specified `IndexMask` for preliminary zeroing.
2. `set` method to overwrite the value.
3. `finalize` with the specified mask to process a subset of values.
This is useful in situations where you want to use the
DefaultMixer without having to overwrite all the values many times.
A performance improvement was observed for NURBS curve evaluation and
attribute interpolation from the point to curve domain of about 15% and
35% respectively (100,000 curves).
Differential Revision: https://developer.blender.org/D15434
|
|
No functional changes.
Add casts required by C++. Simplify destructors. Simplify types.
|
|
Replace `PChart` allocation with simpler calloc/free
|
|
Replaces PCHART_HAS_PINS with `bool has_pins`.
|
|
Differential Revision: https://developer.blender.org/D15556
|
|
This adds three new nodes:
* `Shortest Edge Paths`: Actually finds the shortest paths.
* `Edge Paths to Curves`: Converts the paths to separate curves.
This may generate a quadratic amount of data, making it slow
for large meshes.
* `Edge Paths to Selection`: Generates an edge selection that
contains all edges that are part of a path. This can be used
with the Separate Geometry node to only keep the edges that
are part of a path. For large meshes, this approach can be
much faster than the `Edge Paths to Curves` node, because
less data is created.
Differential Revision: https://developer.blender.org/D15274
|
|
|
|
|
|
|
|
UV maps that are used for surface attachment must not have overlapping
uv islands, because then the same uv coordinate would correspond to
multiple surface positions.
Ref T99936.
|
|
|
|
Previously, curves sculpt tools only worked on original data. This was
very limiting, because one could effectively only sculpt the curves when
all procedural effects were turned off. This patch adds support for curves
sculpting while looking the result of procedural effects (like deformation
based on the surface mesh). This functionality is also known as "crazy space"
support in Blender.
For more details see D15407.
Differential Revision: https://developer.blender.org/D15407
|
|
The name makes more sense as an action, other interpolation
methods besides linear probably don't make sense here anyway.
|
|
|
|
Remove the boilerplate of using a local geometry component just to use
the attribute API that was necessary before b876ce2a4a4638142439.
|
|
This commit removes the use of PolySpline for resampling curves and
replaces it with the length parameterization utility for that purpose.
I didn't test performance, but I would expect the shrinking to be
slightly faster because I reused some arrays to avoid allocating
them for every curve. I noted some potential improvements in
the "add curves" function.
Differential Revision: https://developer.blender.org/D15342
|
|
This commit ports the fillet curves node to the new curves data-block,
and moves the fillet node implementation to the geometry module to help
separate the implementation from the node.
The changes are similar to the subdivide node or resample node. I've
resused common utilities where it makes sense, though some things like
the iteration over attributes can be generalized further. The node
is now multi-threaded per-curve and inside each curve, and some buffers
are reused per curve to avoid many allocations.
The code is more explicit now, and though there is more boilerplate to
pass around many spans, the more complex logic should be more readable.
Differential Revision: https://developer.blender.org/D15346
|
|
Similar to e9f82d3dc7eebadcc52, but for point clouds instead.
Differential Revision: https://developer.blender.org/D15487
|
|
These mutable pointers present problems with ownership in relation to
proper copy-on-write for attributes. The simplest solution is to just
remove them and retrieve the layers from `CustomData` when they are
needed. This also removes the complexity and redundancy of having to
update the pointers as the curves change. A similar change will apply
to meshes and point clouds.
One downside of this change is that it makes random access with RNA
slower. However, it's simple to just use the RNA attribute API instead,
which is unaffected. In this patch I updated Cycles to do that. With
the future attribute CoW changes, this generic approach makes sense
because Cycles can just request ownership of the existing arrays.
Differential Revision: https://developer.blender.org/D15486
|
|
Previously, things like materials, symmetry, and selection options
stored on `Curves` weren't copied to the result in nodes like the
subdivide and resample nodes. Now they are, which fixes some
unexpected behavior and allows visualization of the sculpt mode
selection.
In the realize instances and join nodes the behavior is the same as
for meshes, the parameters are taken from the first (top) input.
I also refactored some functions to return a `CurvesGeometry` by-value,
which makes it the responsibility of the node to copy the parameters.
That should make the algorithms more reusable in other situations.
Differential Revision: https://developer.blender.org/D15408
|
|
Add a small gradient to flipped faces proportional to length of edges.
Differential Revision: https://developer.blender.org/D15475
|
|
The type counts have to be updated eagerly. This was missing from
the realize-instances code before, leading to bugs further down
the line.
|
|
|
|
Differential Revision: https://developer.blender.org/D15421
|
|
Currently, there are two attribute API. The first, defined in `BKE_attribute.h` is
accessible from RNA and C code. The second is implemented with `GeometryComponent`
and is only accessible in C++ code. The second is widely used, but only being
accessible through the `GeometrySet` API makes it awkward to use, and even impossible
for types that don't correspond directly to a geometry component like `CurvesGeometry`.
This patch adds a new attribute API, designed to replace the `GeometryComponent`
attribute API now, and to eventually replace or be the basis of the other one.
The basic idea is that there is an `AttributeAccessor` class that allows code to
interact with a set of attributes owned by some geometry. The accessor itself has
no ownership. `AttributeAccessor` is a simple type that can be passed around by
value. That makes it easy to return it from functions and to store it in containers.
For const-correctness, there is also a `MutableAttributeAccessor` that allows
changing individual and can add or remove attributes.
Currently, `AttributeAccessor` is composed of two pointers. The first is a pointer
to the owner of the attribute data. The second is a pointer to a struct with
function pointers, that is similar to a virtual function table. The functions
know how to access attributes on the owner.
The actual attribute access for geometries is still implemented with the `AttributeProvider`
pattern, which makes it easy to support different sources of attributes on a
geometry and simplifies dealing with built-in attributes.
There are different ways to get an attribute accessor for a geometry:
* `GeometryComponent.attributes()`
* `CurvesGeometry.attributes()`
* `bke::mesh_attributes(const Mesh &)`
* `bke::pointcloud_attributes(const PointCloud &)`
All of these also have a `_for_write` variant that returns a `MutabelAttributeAccessor`.
Differential Revision: https://developer.blender.org/D15280
|
|
Allow for a small epsilon to improve handling of uvs that are on edges.
Generally, when using reverse uv sampling, we expect that the sampling
is supposed to succeed.
|
|
Use consistent class/struct declaration in forward declarations.
Differential Revision: https://developer.blender.org/D15382
|
|
This commit moves the subdivide curve node implementation to the
geometry module, changes it to work on the new curves data-block,
and adds support for Catmull Rom curves. Internally I also added
support for a curve domain selection. That isn't used, but it's
nice to have the option anyway.
Users should notice better performance as well, since we can avoid
many small allocations, and there is no conversion to and from the
old curve type.
The code uses a similar structure to the resample node (60a6fbf5b599)
and the set type node (9e393fc2f125). The resample curves node can be
restructured to be more similar to this soon though.
Differential Revision: https://developer.blender.org/D15334
|
|
This helps to separate concerns, and makes the functionality
available for edit mode.
|
|
This approach is still far from ideal, but at least it has linear
complexity in the common case instead of quadratic.
|
|
This refactor had two main goals:
* Simplify the sampling code by using an algorithm with fewer special cases.
* Generalize the sampling to support non-sorted samples.
The `SampleSegmentHint` optimization was inspired by `ValueAccessor` from
OpenVDB and improves performance 2x in my test cases.
Differential Revision: https://developer.blender.org/D15348
|
|
* Make the class names more consistent.
* Implement missing move-constructors and assignment-operators.
|
|
|
|
In "size" voxel resolution mode, calculating the bounds of the mesh to
volume node's input mesh isn't necessary. For high poly this can take
a few milliseconds, so this commit skips the calculation unless we need
it for the "Amount" mode.
Differential Revision: https://developer.blender.org/D15324
|
|
This adds a Mesh To Volume Node T86838 based on the existing modifier.
The mesh to volume conversion is implemented in the geometry module,
and shared between the node and the modifier.
Currently the node outputs a grid with the name "density". This may
change in the future depending on the decisions made in T91668.
The original patch was by Kris (@Metricity), further implementation
by Geramy Loveless (@GeramyLoveless), then finished by Erik Abrahamsson
(@erik85).
Differential Revision: https://developer.blender.org/D10895
|
|
Prep for D15263
|
|
|