Age | Commit message (Collapse) | Author |
|
smooth out jaggy lines with a given threshold. For each point in a stroke, the ones with in a given distance of its previous segment will be removed,
thus "zig-zag" artefacts can be cleaned up.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12050
|
|
In meshes modifer the Lowest is 0 and Highest is 1.0 and this was working inverted for grease pencil. Now, it works equals to meshes modifier.
Also changed the tooltip to keep consistency with meshes modifier.
|
|
|
|
|
|
The old modifier had two modes, but it is better to keep separated as meshes.
The UI has changed to be more consistent, including a new column type of modifiers.
Note: The logic has not changed with the previous version of the modifier, just is a split on two modifiers..
Reviewed By: mendio, pablovazquez
Differential Revision: https://developer.blender.org/D12586
|
|
|
|
Extend the stroke following an approximated circluar/helical curve.
This can be used as an effect for lineart or on its own as helix generator.
Reviewed By: Sebastian Parborg (zeddb), Hans Goudey (HooglyBoogly), YimingWu (NicksBest), Antonio Vazquez (antoniov), Henrik Dick (weasel)
Differential Revision: https://developer.blender.org/D11668
# 请为您的变更输入提交说明。以 '#' 开始的行将被忽略,而一个空的提交
# 说明将会终止提交。
#
# 位于分支 master
# 您的分支与上游分支 'origin/master' 一致。
#
# 要提交的变更:
# 修改: source/blender/blenkernel/BKE_gpencil_geom.h
# 修改: source/blender/blenkernel/intern/gpencil_geom.cc
# 修改: source/blender/gpencil_modifiers/intern/MOD_gpencillength.c
# 修改: source/blender/makesdna/DNA_gpencil_modifier_defaults.h
# 修改: source/blender/makesdna/DNA_gpencil_modifier_types.h
# 修改: source/blender/makesrna/intern/rna_gpencil_modifier.c
#
|
|
Reason for revert: accidental push of a intermediate change locally.
This reverts commit 25e548c96b3d8c1698fd4385b4dc395665b5a7f6.
|
|
|
|
|
|
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12496
|
|
Create dot-dash effect for grease pencil strokes. User can manually edit the length, gap and styles for each segment of dashed lines.
The values in each segment can all be key-framed to make animations.
Reviewed By: Hans Goudey (HooglyBoogly), Antonio Vazquez (antoniov)
Differential Revision: http://developer.blender.org/D11876
|
|
This allows crease lines to be automatically hidden on smooth surfaces, also provided options for:
- Showing crease on marked sharp edges.
- Force crease detection on smooth surfaces.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: http://developer.blender.org/D12051
|
|
Fix regression introduced in rB34b213d60472
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D12398
|
|
Fixes the regression introduces in rB29f3af952725 . The subdivision modifier used to work on two point strokes with simple mode but not with catmul clark. Now it will work with simple mode and in case of catmull clark mode it will still use simple mode on these strokes.
Differential Revision: https://developer.blender.org/D12397
|
|
When joining two strokes in paint mode using the auto merge option, the join was very hard if the thickness was too different.
This patch adds a smooth to the join in order to get better transition.
Also fixed the problem to join existing strokes very far from actual stroke.
Some cleanup and rename of old code is included in order to make code more readable.
Reviewed By: pepeland
Differential Revision: https://developer.blender.org/D12362
|
|
Fix mesh freeing call for obi->original_me so the address is correct.
|
|
Even though this didn't leak memory, BKE_mesh_free_data doesn't
handle freeing data that is part of the ID making it error prone.
|
|
|
|
Error in 2788b0261cb7d33a2f6f2978ff4f55bb4987edae.
|
|
It wasn't obvious this didn't free the memory of the mesh it's self
leading to memory leaks.
|
|
Lowers tile splitting limit so models with extremely dense mesh
portions could still have reasonable performance while for more
common cases the performance impact should be minimal.
Reviewed By: Sebastian Parborg (zeddb), Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12236
|
|
|
|
These were removed globally in 65ec7ec524e667ec95ce947a95f6273088dffee6.
Some files re-introduced these conventions since.
|
|
This makes the internal naming consistent with the public API. And also gives
us a visibility_flag rather than restrictflag that can be extended with more
flags.
|
|
|
|
|
|
|
|
|
|
Expand camera effective region to a portion beyond image frame so strokes won't end right at the border.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12049
|
|
This patch fixes occlusion function to handle one specific case (when an edge shares a point with triangle) better,especially when there's overlapping edges in this case.
|
|
|
|
Avoid using verbs for panel names, and be consistent with the
"Bake" panel in Cycles, Ocean Modifier, etc.
|
|
The Material picker shouldn't change icon based on it's state,
it should always display the Material icon.
|
|
|
|
|
|
Wording on the UI, slider consistency and material mask switches layout.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: http://developer.blender.org/D11839
|
|
|
|
|
|
The BKE_gpencil_stroke_add_points API function worked well for
creating the primitives in the add object menu, but it expected a
specific data format that doesn't make sense in a dynamic context.
As evidence of that we can see the way source data was duplicated
in the line art file just to use this API function.
This commit solves that problem in two ways:
- Clean up the line art function (this should make it faster too).
- Move/rename the function so its intended use is more clear.
Differential Revision: https://developer.blender.org/D11909
|
|
This commit moves the storage of `bDeformGroup` and the active index
to `Mesh`, `Lattice`, and `bGPdata` instead of `Object`. Utility
functions are added to allow easy access to the vertex groups given
an object or an ID.
As explained in T88951, the list of vertex group names is currently
stored separately per object, even though vertex group data is stored
on the geometry. This tends to complicate code and cause bugs,
especially as geometry is created procedurally and tied less closely
to an object.
The "Copy Vertex Groups to Linked" operator is removed, since they
are stored on the geometry anyway.
This patch leaves the object-level python API for vertex groups in
place. Creating a geometry-level RNA API can be a separate step;
the changes in this commit are invasive enough as it is.
Note that opening a file saved in 3.0 in an earlier version means
the vertex groups will not be available.
Differential Revision: https://developer.blender.org/D11689
|
|
Rename:
- EDBM_mesh_free -> EDBM_mesh_free_data
BKE_editmesh_free -> BKE_editmesh_free_data
Since this doesn't free the edit-mesh pointer.
- BKE_editmesh_free_derivedmesh -> BKE_editmesh_free_derived_caches
Since this no longer uses derived-mesh, match naming for the related
object function BKE_object_free_derived_caches.
Also remove `do_tessellate` argument from BKE_editmesh_create,
since the caller can explicitly do this if it's needed,
with the advantage that it can be combined with normal calculation
which is faster on high-poly meshes.
|
|
|
|
The name was mistakenly written as `use_cached_result`. Fixed.
|
|
After cache implementation line art apply will not show strokes properly, now fixed.
# Conflicts:
# source/blender/gpencil_modifiers/intern/MOD_gpencillineart.c
|
|
|
|
|
|
Now, The weight is used in the randomize parameters of the offset modifier.
This is useful to generate effects like explosions.
Related to the new Vertex Weight modifiers.
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
|