Age | Commit message (Collapse) | Author |
|
|
|
Checkbox to invert rotation angle, suggested by @simonthommes
Differential Revision: https://developer.blender.org/D6932
|
|
This brush has a simple physics solver that helps when sculpting cloth.
- The mass and the damping properties of the simulation are properties of the brush.
- It has two additional radius control to limit the influence and falloff of the simulation.
- Masked vertices are pinned in the simulation, and it applies the sculpt gravity directly in the solver.
- The Cloth Brush has 7 deformation modes with 2 falloff types (radial and plane).
The brush can create the constraints only on the required PBVH nodes, so the simulation is isolated on high poly meshes. As long
as the brush size is not too big it should be possible to keep it real time.
Known issues:
- The way constraints are created is extremely basic and it creates repeated constraints. Maybe there is another way to create fewer constraints while keeping the simulation quality decent. This part can also be multithreaded. (As it is it works ok, but it could be better)
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6715
|
|
This further separates requested attributes and textures from the actual
node graph, that can be retained after the graph has been compiled and
freed. It makes it easier to add volume grids as a native concept, which
sits somewhere between an attribute and a texture.
It also adds explicit link types for UDIM tile mapping, rather than
relying on fairly hidden logic.
|
|
Missing NULL check in recent half-float support.
|
|
This adds the `Half Float Precision` option in the image property panel.
This option is only available on float textures and is enabled by default.
Adding a flag inside the imbuf (IB_halffloat) on load is done for EXR and PSD formats that can store half floating point (16bits/channels).
The option is then not displayed in this case and forced.
Related task T73086
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6891
|
|
|
|
Clamping here might be a bit too much if output is expected to be HDR.
But we don't support HDR atm so clamping is fine.
|
|
Remove additional Euler modes for the time being, not working as intended, will add back if there is a need.
|
|
The current code allocates and transfers a lot of memory to the GPU,
but only a small portion of this memory is actually used.
In addition, the code calls many costly gl operations during the
caching process.
This commit significantly reduce the amount of memory by allocating
and transferring a flat array without pads to the GPU.
It also calls as little as possible the gl operations during the cache.
This code also simulate a billinear filter `GL_LINEAR` using a 1D texture.
**Average drawing time:**
|before:|0.00003184 sec
|now:|0.00001943 sec
|fac:|1.6385156675048407
**5 worst times:**
|before:|[0.001075, 0.001433, 0.002143, 0.002915, 0.003242]
|now:|[0.00094, 0.000993, 0.001502, 0.002284, 0.002328]
Differential Revision: https://developer.blender.org/D6886
|
|
This patch adds new render passes to EEVEE. These passes include:
* Emission
* Diffuse Light
* Diffuse Color
* Glossy Light
* Glossy Color
* Environment
* Volume Scattering
* Volume Transmission
* Bloom
* Shadow
With these passes it will be possible to use EEVEE effectively for
compositing. During development we kept a close eye on how to get similar
results compared to cycles render passes there are some differences that
are related to how EEVEE works. For EEVEE we combined the passes to
`Diffuse` and `Specular`. There are no transmittance or sss passes anymore.
Cycles will be changed accordingly.
Cycles volume transmittance is added to multiple surface col passes. For
EEVEE we left the volume transmittance as a separate pass.
Known Limitations
* All materials that use alpha blending will not be rendered in the render
passes. Other transparency modes are supported.
* More GPU memory is required to store the render passes. When rendering
a HD image with all render passes enabled at max extra 570MB GPU memory is
required.
Implementation Details
An overview of render passes have been described in
https://wiki.blender.org/wiki/Source/Render/EEVEE/RenderPasses
Future Developments
* In this implementation the materials are re-rendered for Diffuse/Glossy
and Emission passes. We could use multi target rendering to improve the
render speed.
* Other passes can be added later
* Don't render material based passes when only requesting AO or Shadow.
* Add more passes to the system. These could include Cryptomatte, AOV's, Vector,
ObjectID, MaterialID, UV.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D6331
|
|
|
|
|
|
This patch provides an optimisation for Ease (Smoothstep) setting in the color ramp node.
This optimisation exists already for Constant and Linear modes.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6880
|
|
Under some circumstances, MultiDrawIndirect was disabled to improve perf.
of average scene. But this conflicted with the normal instancing buffer
filling if only 1 or 2 instances were needed to fill the buffer. All
consecutive drawcalls could not be batched together and performance would
degrade rapidly.
This patch make my instance test scene go from 11fps back to 40fps where
it should have been.
|
|
|
|
This node provides the ability to rotate a vector around a `center` point using either `Axis Angle` , `Single Axis` or `Euler` methods.
Reviewed By: #cycles, brecht
Differential Revision: https://developer.blender.org/D3789
|
|
* Direction mode X, Y and Z to align with axes rather than diagonal or
spherical as previously. X is the new default, existing files will
use diagonal or spherical for compatibility.
* Phase offset to offset the wave along its direction, for purposes like
animation and distortion.
https://developer.blender.org/D6382
|
|
|
|
|
|
|
|
|
|
This NULL check is needed elsewhere, do it here as well.
|
|
|
|
This solution is optimized for GL version 4.4 or greater.
|
|
This adds some extra functions recently added to the float Maths Node.
Not all functions have been ported over in this patch.
Also:
+ Tidy up menu
+ Change node color to match other vector nodes, this helps distinguish vector and float nodes in the tree
+ Move shared OSL functions to new header node_math.h
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6713
|
|
Reviewed By: brecht sergey jbakker
Differential Revision: http://developer.blender.org/D6729
|
|
|
|
|
|
|
|
Apparently the compiled shader bump into some register limit and
the compiler instead of giving an error, does something incorrectly.
Differential Revision: https://developer.blender.org/D6759
|
|
Nvidia has fixed their drivers so there is no reasons to keep this.
This fix T70011 NVIDIA issue prevents full indirect draw call batching performance
|
|
|
|
Normal UI widget and 3D navigation gizmo where clipping at high DPI.
|
|
Useful when UI code needs to extend the clipping range.
|
|
|
|
The function `gpu_texture_create_tile_array` checked for a valid
tile ibuf when determining the packing location. During the actual packaging it didn't.
As the tiles are already ignored when selecting the packing location, we
can also ignore it when copying it to the glTexture. Therefore this
patch removes the existing BLI_assert and replaces it with a NULL check.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D6738
|
|
Merge conflict in source/blender/gpu/GPU_texture.h
|
|
In blender 2.79 you could use a render result as a camera background
image. This is useful during layout/compositing. During Blender 2.80
development there were 2 issues introduced that removed this feature.
* to receive a render result the image required a lock. This lock wasn't passed and therefore no image was read from the result. Generating an GPUTexture from an Blender image also didn't do the locking.
* the iuser->scene field wasn't set what is required for render results.
This change adds an optional `ibuf` parameter to `GPU_texture_from_blender` that can be passed when available.
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D6684
|
|
This also fixes glsl version of fmod when both inputs are negative.
Differential Revision: https://developer.blender.org/D6704
|
|
|
|
|
|
Hash input values to a color.
Differential Revision: https://developer.blender.org/D6672
|
|
|
|
This is a more correct fix to the issue Brecht was fixing in D6600.
While the fix in that patch worked fine for linking it broke ASAN
runtime under some circumstances.
For example, `make full debug developer` would compile, but trying
to start blender will cause assert failure in ASAN (related on check
that ASAN is not running already).
Top-level idea: leave it to CMake to keep track of dependency graph.
The root of the issue comes to the fact that target like "blender" is
configured to use a lot of static libraries coming from Blender sources
and to use external static libraries. There is nothing which ensures
order between blender's and external libraries. Only order of blender
libraries is guaranteed.
It was possible that due to a cycle or other circumstances some of
blender libraries would have been passed to linker after libraries
it uses, causing linker errors.
For example, this order will likely fail:
libbf_blenfont.a libfreetype6.a libbf_blenfont.a
This change makes it so blender libraries are explicitly provided
their dependencies to an external libraries, which allows CMake to
ensure they are always linked against them.
General rule here: if bf_foo depends on an external library it is
to be provided to LIBS for bf_foo.
For example, if bf_blenkernel depends on opensubdiv then LIBS in
blenkernel's CMakeLists.txt is to include OPENSUBDIB_LIBRARIES.
The change is made based on searching for used include folders
such as OPENSUBDIV_INCLUDE_DIRS and adding corresponding libraries
to LIBS ion that CMakeLists.txt. Transitive dependencies are not
simplified by this approach, but I am not aware of any downside of
this: CMake should be smart enough to simplify them on its side.
And even if not, this shouldn't affect linking time.
Benefit of not relying on transitive dependencies is that build
system is more robust towards future changes. For example, if
bf_intern_opensubiv is no longer depends on OPENSUBDIV_LIBRARIES
and all such code is moved to bf_blenkernel this will not break
linking.
The not-so-trivial part is change to blender_add_lib (and its
version in Cycles). The complexity is caused by libraries being
provided as a single list argument which doesn't allow to use
different release and debug libraries on Windows. The idea is:
- Have every library prefixed as "optimized" or "debug" if
separation is needed (non-prefixed libraries will be considered
"generic").
- Loop through libraries passed to function and do simple parsing
which will look for "optimized" and "debug" words and specify
following library to corresponding category.
This isn't something particularly great. Alternative would be to
use target_link_libraries() directly, which sounds like more code
but which is more explicit and allows to have more flexibility
and control comparing to wrapper approach.
Tested the following configurations on Linux, macOS and Windows:
- make full debug developer
- make full release developer
- make lite debug developer
- make lite release developer
NOTE: Linux libraries needs to be compiled with D6641 applied,
otherwise, depending on configuration, it's possible to run into
duplicated zlib symbols error.
Differential Revision: https://developer.blender.org/D6642
|
|
This way we remove the need for the srgb boolean uniform and a lot of code complexity. However, mesh update is going to be a bit slower.
I did not benchmark the performance impact.
This also fix a typo in draw_cache_impl_particles.c and fix hair not using vertex color in workbench.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6610
|
|
|
|
This was caused by the clip distance not being passed by the geometry
shader.
|
|
|
|
Based on @fclem's suggestion in D6421, this commit implements support for
storing all tiles of a UDIM texture in a single 2D array texture on the GPU.
Previously, Eevee was binding one OpenGL texture per tile, quickly running
into hardware limits with nontrivial UDIM texture sets.
Workbench meanwhile had no UDIM support at all, as reusing the per-tile
approach would require splitting the mesh by tile as well as texture.
With this commit, both Workbench as well as Eevee now support huge numbers
of tiles, with the eventual limits being GPU memory and ultimately
GL_MAX_ARRAY_TEXTURE_LAYERS, which tends to be in the 1000s on modern GPUs.
Initially my plan was to have one array texture per unique size, but managing
the different textures and keeping everything consistent ended up being way
too complex.
Therefore, we now use a simpler version that allocates a texture that
is large enough to fit the largest tile and then packs all tiles into as many
layers as necessary.
As a result, each UDIM texture only binds two textures (one for the actual
images, one for metadata) regardless of how many tiles are used.
Note that this rolls back per-tile GPUTextures, meaning that we again have
per-Image GPUTextures like we did before the original UDIM commit,
but now with four instead of two types.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6456
|