Age | Commit message (Collapse) | Author |
|
|
|
|
|
This patch provides an optimisation for Ease (Smoothstep) setting in the color ramp node.
This optimisation exists already for Constant and Linear modes.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6880
|
|
Under some circumstances, MultiDrawIndirect was disabled to improve perf.
of average scene. But this conflicted with the normal instancing buffer
filling if only 1 or 2 instances were needed to fill the buffer. All
consecutive drawcalls could not be batched together and performance would
degrade rapidly.
This patch make my instance test scene go from 11fps back to 40fps where
it should have been.
|
|
|
|
This node provides the ability to rotate a vector around a `center` point using either `Axis Angle` , `Single Axis` or `Euler` methods.
Reviewed By: #cycles, brecht
Differential Revision: https://developer.blender.org/D3789
|
|
* Direction mode X, Y and Z to align with axes rather than diagonal or
spherical as previously. X is the new default, existing files will
use diagonal or spherical for compatibility.
* Phase offset to offset the wave along its direction, for purposes like
animation and distortion.
https://developer.blender.org/D6382
|
|
|
|
|
|
|
|
|
|
This NULL check is needed elsewhere, do it here as well.
|
|
|
|
This solution is optimized for GL version 4.4 or greater.
|
|
This adds some extra functions recently added to the float Maths Node.
Not all functions have been ported over in this patch.
Also:
+ Tidy up menu
+ Change node color to match other vector nodes, this helps distinguish vector and float nodes in the tree
+ Move shared OSL functions to new header node_math.h
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6713
|
|
Reviewed By: brecht sergey jbakker
Differential Revision: http://developer.blender.org/D6729
|
|
|
|
|
|
|
|
Apparently the compiled shader bump into some register limit and
the compiler instead of giving an error, does something incorrectly.
Differential Revision: https://developer.blender.org/D6759
|
|
Nvidia has fixed their drivers so there is no reasons to keep this.
This fix T70011 NVIDIA issue prevents full indirect draw call batching performance
|
|
|
|
Normal UI widget and 3D navigation gizmo where clipping at high DPI.
|
|
Useful when UI code needs to extend the clipping range.
|
|
|
|
The function `gpu_texture_create_tile_array` checked for a valid
tile ibuf when determining the packing location. During the actual packaging it didn't.
As the tiles are already ignored when selecting the packing location, we
can also ignore it when copying it to the glTexture. Therefore this
patch removes the existing BLI_assert and replaces it with a NULL check.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D6738
|
|
Merge conflict in source/blender/gpu/GPU_texture.h
|
|
In blender 2.79 you could use a render result as a camera background
image. This is useful during layout/compositing. During Blender 2.80
development there were 2 issues introduced that removed this feature.
* to receive a render result the image required a lock. This lock wasn't passed and therefore no image was read from the result. Generating an GPUTexture from an Blender image also didn't do the locking.
* the iuser->scene field wasn't set what is required for render results.
This change adds an optional `ibuf` parameter to `GPU_texture_from_blender` that can be passed when available.
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D6684
|
|
This also fixes glsl version of fmod when both inputs are negative.
Differential Revision: https://developer.blender.org/D6704
|
|
|
|
|
|
Hash input values to a color.
Differential Revision: https://developer.blender.org/D6672
|
|
|
|
This is a more correct fix to the issue Brecht was fixing in D6600.
While the fix in that patch worked fine for linking it broke ASAN
runtime under some circumstances.
For example, `make full debug developer` would compile, but trying
to start blender will cause assert failure in ASAN (related on check
that ASAN is not running already).
Top-level idea: leave it to CMake to keep track of dependency graph.
The root of the issue comes to the fact that target like "blender" is
configured to use a lot of static libraries coming from Blender sources
and to use external static libraries. There is nothing which ensures
order between blender's and external libraries. Only order of blender
libraries is guaranteed.
It was possible that due to a cycle or other circumstances some of
blender libraries would have been passed to linker after libraries
it uses, causing linker errors.
For example, this order will likely fail:
libbf_blenfont.a libfreetype6.a libbf_blenfont.a
This change makes it so blender libraries are explicitly provided
their dependencies to an external libraries, which allows CMake to
ensure they are always linked against them.
General rule here: if bf_foo depends on an external library it is
to be provided to LIBS for bf_foo.
For example, if bf_blenkernel depends on opensubdiv then LIBS in
blenkernel's CMakeLists.txt is to include OPENSUBDIB_LIBRARIES.
The change is made based on searching for used include folders
such as OPENSUBDIV_INCLUDE_DIRS and adding corresponding libraries
to LIBS ion that CMakeLists.txt. Transitive dependencies are not
simplified by this approach, but I am not aware of any downside of
this: CMake should be smart enough to simplify them on its side.
And even if not, this shouldn't affect linking time.
Benefit of not relying on transitive dependencies is that build
system is more robust towards future changes. For example, if
bf_intern_opensubiv is no longer depends on OPENSUBDIV_LIBRARIES
and all such code is moved to bf_blenkernel this will not break
linking.
The not-so-trivial part is change to blender_add_lib (and its
version in Cycles). The complexity is caused by libraries being
provided as a single list argument which doesn't allow to use
different release and debug libraries on Windows. The idea is:
- Have every library prefixed as "optimized" or "debug" if
separation is needed (non-prefixed libraries will be considered
"generic").
- Loop through libraries passed to function and do simple parsing
which will look for "optimized" and "debug" words and specify
following library to corresponding category.
This isn't something particularly great. Alternative would be to
use target_link_libraries() directly, which sounds like more code
but which is more explicit and allows to have more flexibility
and control comparing to wrapper approach.
Tested the following configurations on Linux, macOS and Windows:
- make full debug developer
- make full release developer
- make lite debug developer
- make lite release developer
NOTE: Linux libraries needs to be compiled with D6641 applied,
otherwise, depending on configuration, it's possible to run into
duplicated zlib symbols error.
Differential Revision: https://developer.blender.org/D6642
|
|
This way we remove the need for the srgb boolean uniform and a lot of code complexity. However, mesh update is going to be a bit slower.
I did not benchmark the performance impact.
This also fix a typo in draw_cache_impl_particles.c and fix hair not using vertex color in workbench.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6610
|
|
|
|
This was caused by the clip distance not being passed by the geometry
shader.
|
|
|
|
Based on @fclem's suggestion in D6421, this commit implements support for
storing all tiles of a UDIM texture in a single 2D array texture on the GPU.
Previously, Eevee was binding one OpenGL texture per tile, quickly running
into hardware limits with nontrivial UDIM texture sets.
Workbench meanwhile had no UDIM support at all, as reusing the per-tile
approach would require splitting the mesh by tile as well as texture.
With this commit, both Workbench as well as Eevee now support huge numbers
of tiles, with the eventual limits being GPU memory and ultimately
GL_MAX_ARRAY_TEXTURE_LAYERS, which tends to be in the 1000s on modern GPUs.
Initially my plan was to have one array texture per unique size, but managing
the different textures and keeping everything consistent ended up being way
too complex.
Therefore, we now use a simpler version that allocates a texture that
is large enough to fit the largest tile and then packs all tiles into as many
layers as necessary.
As a result, each UDIM texture only binds two textures (one for the actual
images, one for metadata) regardless of how many tiles are used.
Note that this rolls back per-tile GPUTextures, meaning that we again have
per-Image GPUTextures like we did before the original UDIM commit,
but now with four instead of two types.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6456
|
|
|
|
Users reported that Whiskey lake has the same issue as other intel
platforms where an extra glFlush is needed. This change will
add Whiskey Lake to that exception.
Patch provided by Philip Luk
|
|
Differential Revision: https://developer.blender.org/D6311
|
|
The ratio for area stretching was packed into an unsigned int, but could
contain negative numbers. This flipped the negative numbers to high
positive numbers and rendered the wrong color in the stretching overlay.
I can remember during {T63755} I had to flip the sign to get the
correct result, but couldn't find out why that was needed. Now I know.
Reviewed By: fclem, mano-wii
Differential Revision: https://developer.blender.org/D6440
|
|
gpu_draw.c had generic sounding utility functions which were specific
to smoke drawing.
Split into it's own file so the functionality is clearly separated.
|
|
|
|
|
|
A collection of smaller changes that are required in the /blender/source files. A lot of them are also due to variable renaming.
Reviewed By: sergey
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3855
|
|
Previously this limit was rather high, but with UDIMs it's fairly easy
to reach this many images. Even though this exceeds the texture limit
on most hardware as far as I can tell, it should at least not crash.
The old code uses a fixed array which overflows eventually, this fix
replaces the array with a GSet.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6416
|
|
|
|
This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
|