Age | Commit message (Collapse) | Author |
|
Image format code checked the file type against an enum except for
zero which is used when the format can't be detected.
Also add doc-strings to some of the image file type callbacks.
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
Use 0.0254 for conversion as 39.3700787 isn't exactly 1/0.0254
and can't be written as a round float/double.
|
|
Motivation the functions get 3 different kind of flag parameters (ImBuf,
DrawType, OffscreenRendering) the naming of the flags were not clear,
leading to mistakes and unnecessary time spend debugging.
|
|
|
|
This adds the `Half Float Precision` option in the image property panel.
This option is only available on float textures and is enabled by default.
Adding a flag inside the imbuf (IB_halffloat) on load is done for EXR and PSD formats that can store half floating point (16bits/channels).
The option is then not displayed in this case and forced.
Related task T73086
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6891
|
|
This also replaces the Use Alpha setting. We now have these alpha modes:
* Straight: store RGB and alpha channels separately with alpha acting as a
mask, also known as unassociated alpha.
* Premultiplied: transparent RGB pixels are multiplied by the alpha channel.
The natural format for renders.
* Channel Packed: different images are packed in the RGB and alpha channels,
and they should not influence each other. Channel packing is commonly used
by game engines to save memory.
* None: ignore alpha channel from the file and make image fully opaque.
Cycles OSL does not correctly support Channel Packed and None yet, we are
missing fine control over the OpenImageIO texture cache to do that.
Fixes T53672
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Without this clang-format may wrap them onto a single line.
|
|
|
|
For clang-format not to wrap definitions.
|
|
Was used in the game engine and is no longer used.
|
|
Conflicts:
source/blender/blenkernel/intern/collision.c
|
|
Differential Revision: https://developer.blender.org/D3668
|
|
|
|
It has been deprecated since at least macOS 10.9 and fully removed in 10.12.
I am unsure if we should remove it only in 2.8. But you cannot build blender with it supported when using a modern xcode version anyway so I would tend towards just removing it also for 2.79 if that ever happens.
Reviewers: mont29, dfelinto, juicyfruit, brecht
Reviewed By: mont29, brecht
Subscribers: Blendify, brecht
Maniphest Tasks: T52807
Differential Revision: https://developer.blender.org/D2333
|
|
Also remove duplicate & mismatching comments from grease-pencil header.
Keep comments close to implementation to avoid getting out of sync.
|
|
|
|
This patch aims at providing multiple compression modes for TIFF output,
particularly uncompressed mode.
At this moment have None, Deflate, LZW and Pack Bits modes been integrated,
mimicking The GIMP export modes (except JPEG mode, which returned encoding
errors).
More modes could be added if needed.
Default remains Deflate.
Reviewers: campbellbarton, mont29, sergey
Differential Revision: https://developer.blender.org/D1709
|
|
files.
All optional image format are not #define'd in submodules like DDS read/write code.
This means values of `eImbTypes` would not always be the same in all contexts, yuck!
This is a regression and should be backported to 'a' release.
|
|
|
|
|
|
ImBuf types were getting stored as bitflags in a 32bit integer which had
already run out of space. Solved the problem by separating file type to
an ftype enum, and file specific options to foptions.
Reviewed by Campbell, thanks a lot!
|
|
Official Documentation:
http://www.blender.org/manual/render/workflows/multiview.html
Implemented Features
====================
Builtin Stereo Camera
* Convergence Mode
* Interocular Distance
* Convergence Distance
* Pivot Mode
Viewport
* Cameras
* Plane
* Volume
Compositor
* View Switch Node
* Image Node Multi-View OpenEXR support
Sequencer
* Image/Movie Strips 'Use Multiview'
UV/Image Editor
* Option to see Multi-View images in Stereo-3D or its individual images
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
I/O
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
Scene Render Views
* Ability to have an arbitrary number of views in the scene
Missing Bits
============
First rule of Multi-View bug report: If something is not working as it should *when Views is off* this is a severe bug, do mention this in the report.
Second rule is, if something works *when Views is off* but doesn't (or crashes) when *Views is on*, this is a important bug. Do mention this in the report.
Everything else is likely small todos, and may wait until we are sure none of the above is happening.
Apart from that there are those known issues:
* Compositor Image Node poorly working for Multi-View OpenEXR
(this was working prefectly before the 'Use Multi-View' functionality)
* Selecting camera from Multi-View when looking from camera is problematic
* Animation Playback (ctrl+F11) doesn't support stereo formats
* Wrong filepath when trying to play back animated scene
* Viewport Rendering doesn't support Multi-View
* Overscan Rendering
* Fullscreen display modes need to warn the user
* Object copy should be aware of views suffix
Acknowledgments
===============
* Francesco Siddi for the help with the original feature specs and design
* Brecht Van Lommel for the original review of the code and design early on
* Blender Foundation for the Development Fund to support the project wrap up
Final patch reviewers:
* Antony Riakiotakis (psy-fi)
* Campbell Barton (ideasman42)
* Julian Eisel (Severin)
* Sergey Sharybin (nazgul)
* Thomas Dinged (dingto)
Code contributors of the original branch in github:
* Alexey Akishin
* Gabriel Caraballo
|
|
This patch makes it possible for the user to select all supported compression types in OpenEXR 2.2
Discussion points:
- B44 is only defined for half's it compresses to a fixed representation of 44% of the halfs. We do currently not reflect in the UI that in the case of float32's it will be equal to compression = NONE
- ZIPS is single scanline zip and is supposed to be useful in cases where importing in Nuke happens.
- The new Dreamworks formats, are the worth exposing etc etc
Reviewers: campbellbarton, sergey
Reviewed By: sergey
Projects: #bf_blender
Differential Revision: https://developer.blender.org/D1050
|
|
Work towards T42418
For now got rid of linked list holding key,value pairs for metadata in favour of ID properties.
Reviewers: campbellbarton, sergey
Reviewed By: sergey
Projects: #bf_blender
Differential Revision: https://developer.blender.org/D872
|
|
Issue was caused by cache limitor removing viewer image buffer
from the memory during compositing. Now made it so all viewer
images are persistent in the memory.
This solves the crash mentioned above and also makes it so
render/compo results are never lost.
Further tweaks are possible, but pretty much happy now, at
least no stoppers for work are there.
|
|
As per Brecht van Lommel's suggestion.
|
|
We now support the combined layer of Photoshop files (stored as layer 0
in the file). This way users can keep their files as multilayer PSD and
Blender always handle them as flat images.
For perfect alpha this requires an OpenImageIO update:
https://github.com/OpenImageIO/oiio/commit/342cc2633ff590a3bb278481c61ae798c7148361
Photoshop sample files:
https://github.com/OpenImageIO/oiio-images
Brecht has some pending fixes to push for OIIO as well, so we may as
well wait to update our libraries.
What works:
===========
* 8bit images (with or without alpha)
* 16bits images (alpha discarded)
* Photoshop files saved with 'Maximum Compatibility'
* Cycles, Blender internal, BGE (and player)
Known limitations
(due to OIIO dependency):
=========================
* Images with less than 4 channels show a wrong thumbnail (bug may be in OIIO)
* Packed images are not supported
* We do not write PSD files.
Note: old Blenders have support for PSD via Quicktime library. But due
to license issues this was discontinued.
Many thanks for Brecht van Lommel for reviewing the patch, suggesting
multiple improvements and to help solving the alpha issue.
|
|
|
|
paint. Was own regression when optimizing colour operations. I will not
use an alpha bit mask since it may run into portability issues with byte
order.
|
|
outside of loop and remove a function call. Should give a little speedup when
painting inside the image editor.
|
|
Used by image painting mode, so every brush step would mark area
if affected on, but actual color space conversion would happen
later when actually displaying image.
Implemented as a rcti stored in ImBuf which is getting merged with
partial rect passed to IMB_partial_display_buffer_update_delayed.
This makes painting as fast as it currently possible and finally
solves #33935: Texture painting slow down with mouse, but not with tablet
|
|
Own mistake in 16bit PNG support, wrong bitmask for custom flags
ftype really needs cleanup..
|
|
This assumptions are now made:
- Internally float buffers are always linear alpha-premul colors
- Readers should worry about delivering float buffers with that
assumptions.
- There's an input image setting to say whether it's stored with
straight/premul alpha on the disk.
- Byte buffers are now assumed have straight alpha, readers should
deliver straight alpha.
Some implementation details:
- Removed scene's color unpremultiply setting, which was very
much confusing and was wrong for default settings.
Now all renderers assumes to deliver premultiplied alpha.
- IMB_buffer_byte_from_float will now linearize alpha when
converting from buffer.
- Sequencer's effects were changed to assume bytes have got
straight alpha. Most of effects will work with bytes still,
however for glow it was more tricky to avoid data loss, so
there's a commented out glow implementation which converts
byte buffer to floats first, operates on floats and returns
bytes back. It's slower and not sure if it should actually
be used -- who're using glow on alpha anyway?
- Sequencer modifiers should also be working nice with straight
bytes now.
- GLSL preview will predivide float textures to make nice shading,
shading with byte textures worked nice (GLSL was assuming straight
alpha).
- Blender Internal will set alpha=1 to the whole sky. The same
happens in Cycles and there's no way to avoid this -- sky is
neither straight nor premul and doesn't fit color pipeline well.
- Straight alpha mode for render result was also eliminated.
- Conversion to correct alpha need to be done before linearizing
float buffer.
- TIFF will now load and save files with proper alpha mode setting
in file meta data header.
- Remove Use Alpha from texture mapping and replaced with image
datablock setting.
Behaves much more predictable and clear from code point of view
and solves possible regressions when non-premultiplied images were
used as textures with ignoring alpha channel.
|
|
This commit adds a support of saving 16bit PNG files.
Alpha for such files would be premultiplied, would be corrected
with an upcoming alpha premul cleanup (it's not the only format
which will output 16bit image with premul alpha).
|
|
This codec is absolutely needed to generate DCP using OpenDCP,
before that external application to convert JP2 to J2K was used
which slowed down export a lot.
New codec is exposed to image format settings panel and called
Codec. Default one is JP2 which creates files with .jp2 extension,
new one is called J2K which creates with .j2c extension.
Other changes:
- Fixed avi jpeg warning which was treating as error here.
- Made it so extension is detecting from ImageFormatData instead
of image file type, which makes it possible to have different
extension for the same file type depending on it's settings.
IRIS format should still be changed (depending on number of
channels it'll be .bw, .rgb or .rgba extension)
- Default image format settings would be set from image buffer
when re-saving it. Makes it possible to easily open .j2c file
and save it using J2K codec (without this change it'll save as
.jp2 using JP2 codec)
|
|
Patch by Julien Enche, thanks!
From the patch comment:
It allows Blender to load:
- 1, 8, 10, 12 and 16 bits files. For 10 and 12 bits files, packed or
filled type A/B are supported.
- RGB, Log, Luma and YCbCr colorspaces.
- Big and little endian storage.
- Multi-elements (planar) storage.
It allows Blender to save :
- 8, 10, 12 and 16 bits file. For 10 and 12 bits files, the most used
type A padding is used.
- RGB and Log colorspaces (Cineon can only be saved in Log colorspace).
For Log colorspace, the common default values are used for gamma,
reference black and reference white (respectively 1.7, 95 and 685 for
10 bits files).
- Saved DPX/Cineon files now match the viewer.
Some files won't load (mostly because I haven't seen any of them):
- Compressed files
- 32 and 64 bits files
- Image orientation information are not taken in account. Here too,
I haven't seen any file that was not top-bottom/left-right oriented.
|
|
|
|
had a typo too.
|
|
Also don't color manage data buffers in texture painting.
Makes it possible to view heights and normal maps in proper space
and also paint on them without applying extra transformation.
|
|
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
|
|
disk, the new filetype was not always recognized.
|
|
This patch started out as a patch by me, then cleaned up by Kupoman during his work on Cucumber.
One important thing to keep in mind when using this feature is that you'll need to flip your textures vertically (both the GIMP and Photoshop DDS tools I've seen have support for this on export). This is a quirk in using a texture format originally made for DirectX/DirectDraw, and flipping the compressed data is a real headache. Another quick fix for this issue is to change the Y value for the Size in the Mapping panel in the Texture properties to -1 (default is 1).
|
|
* Remove all code for Texture and Sequencer plugin system, this never worked in 2.5x / 2.6x and is therefore not needed anymore.
* DNA structures are kept, all read/writefile code is gone.
|
|
|