| Age | Commit message (Collapse) | Author |
|---|
|
This was a regression in svn rev52718 caused by the fact that we can not
free packet fun until we've finished all manipulation with decoded frame
since frame and packet could share same pointers.
For now restored old behavior of next_packet which seems to be well
tested and better not do bigger refactoring here so close to release.
Memory leak fixed by that revision was fixed by calling av_free_packet
just before avcodec_decode_video2 in cases we're at the end of file.
Tested with valgrind and could not see any memory leaks in ffmpeg
area.
|
|
This fixes a memory leak caused by the last packet on stream EOF not freed.
(Memory leak occurs on ffmpeg heap managed by av_malloc / av_free, so it is
invisible to Blender)
Also: clean up the code a little bit (anim->next_packet was never really used,
so could be moved into a local variable)
|
|
|
|
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
|
|
|
|
|
|
|
|
|
|
without the underscores these clogged up the namespace for autocompleation which was annoying.
|
|
|
|
This fixed two issues:
* RAW DV-seeking has to be done using DTS. Sounds silly, but ffmpeg
tracks internal state in RAW DV format decoder and runs mad, if
we seek by byte. Don't know, why I haven't noticed that, when I
added it.
* real fix(tm) for #29295
problem was: we did AVFrame read ahead, and the pattern
read_frame -> decode -> read_frame -> do color conversion of first frame
works everywhere but RAW RGB-files which do some pointer shuffling
within ffmpeg to save a memcpy...
I removed read ahead completely, since it didn't work like originally
intented. Might come back later, but the original purpose (making
resyncing easier if we are completely lost in stream) it never
fullfilled.
|
|
http://markmail.org/message/fp7ozcywxum3ar7n
|
|
|
|
- define __BIG_ENDIAN__ or __LITTLE_ENDIAN__ with cmake & scons.
- ENDIAN_ORDER is now a define rather than a global short.
- replace checks like this with single ifdef: #if defined(__sgi) || defined (__sparc) || defined (__sparc__) || defined (__PPC__) || defined (__ppc__) || defined (__hppa__) || defined (__BIG_ENDIAN__)
- remove BKE_endian.h which isn't used
|
|
at all.
|
|
This patch adds:
* support for proxy building again (missing feature from Blender 2.49)
additionally to the way, Blender 2.49 worked, you can select several
strips at once and make Blender build proxies in the background (using
the job system)
Also a new thing: movie proxies are now build into AVI files, and
the proxy system is moved into ImBuf-library, so that other parts
of blender can also benefit from it.
* Timecode support: to fix seeking issues with files, that have
a) varying frame rates
b) very large GOP lengths
c) are broken inbetween
d) use different time code tracks
the proxy builder can now also build timecode indices, which are
used (optionally) for seeking.
For the first time, it is possible, to do frame exact seeking on
all file types.
* Support for different video-streams in one video file (can be
selected in sequencer, other parts of blender can also use it,
but UI has to be added accordingly)
* IMPORTANT: this patch *requires* ffmpeg 0.7 or newer, since
older versions don't support the pkt_pts field, that is essential
for building timecode indices.
Windows and Mac libs are already updated, Linux-users have to build
their own ffmpeg verions until distros keep up.
|
|
|
|
|
|
|
|
|
|
tile cache code in imbuf, but it is not hooked up to the render engine.
Imbuf module: some small refactoring and removing a lot of unused or old code
(about 6.5k lines).
* Added a ImFileType struct with callbacks to make adding an file format type,
or making changes to the API easier.
* Move imbuf init/exit code into IMB_init()/IMB_exit() functions.
* Increased mipmap levels from 10 to 20, you run into this limit already with
a 2k image.
* Removed hamx, amiga, anim5 format support.
* Removed colormap saving, only simple colormap code now for reading tga.
* Removed gen_dynlibtiff.py, editing this is almost as much work as just
editing the code directly.
* Functions removed that were only used for sequencer plugin API:
IMB_anim_nextpic, IMB_clever_double, IMB_antialias, IMB_gamwarp,
IMB_scalefieldImBuf, IMB_scalefastfieldImBuf, IMB_onethird, IMB_halflace,
IMB_dit0, IMB_dit2, IMB_cspace
* Write metadata info into OpenEXR images. Can be viewed with the command
line utility 'exrheader'
For the image tile cache code, see this page:
http://wiki.blender.org/index.php/Dev:2.5/Source/Imaging/ImageTileCache
|
|
|
|
|
|
Updated ffmpeg to release version 0.5
updated x264 to today's daily build
thanks to ben2610 for first patches (but you got hddaudio.c wrong :)
|
|
* add support for building redcode on win32/msvc, but disabled for now, as there are linking problems
- I cleaned the redcode sconscript - the copying of headers within the source tree is not a clean solution
This needs to be fixed later on. For now, lets use redcode from extern/ until a better way is found.
|
|
Fixed deinterlacing (inplace deinterlacing didn't work out properly...).
[#14672] Sequencer: deinterlace filter artifacts
|
|
This adds redcode (the file format of RED one, R3D) support to blender.
Seems to work fine with the footage I found on the web, but keep in
mind, that because of the unoptimized nature of libopenjpeg, frame
decoding isn't that fast.
It is also a rather challenging task, to make 4k-float-footage realtime :)
|
|
blocks that were previously missed; and b) greatly increase my
ohloh stats!
|
|
|
|
Updated FFMPEG to latest version.
Since we now use swscaler, things should be a lot faster!
Please check on Big-Endian, if this still works!
|
|
- blur works again (this was a serious bug in gamwarp...)
- seperates all sequence effects into a seperate file with a clean interface
- thereby fixing some obscure segfaults
- seperates the scope views into a seperate file
- adds float support to all effects and scope views
- removes a bad level call to open_plugin_seq
- FFMPEG seeking improved a lot.
- FFMPEG compiles with debian sarge version cleanly
- Makes hdaudio seek and resample code really work
|
|
* Add ffmpeg-read support in anim.c and util.c
* Makes ImBufs refcountable. You can now increase an internal refcounter
in ImBufs (using IMB_refImBuf) which is decreased by freeImBuf.
This makes it possible to simply pass ImBuf pointers around in the
sequencer saving a few memcopies.
|
|
removed leftovers from Freeimage/Imagemagick experiments
and removed stuff from a Quicktime for linux implementation.
Also removed the (win32) Fullscreen button from the UI and
disabled the corresponding commandline option. The code is
still present to reenable the option whenever the ATI issues
get solved.
|
|
NOTE: BLI_winstuff.h was meant to be a wrapper around windows.h to handle
undefining various crap that windows.h defines. Platform specific headers
should only have to be included in a few places. This reduces the number
of inclusions of BLI_winstuff.h to 16 which is a much more reasonable
number (than the 144 or whatever it used to be)
|
|
I just fixed indentation (replaced spaces with tabs where needed) and removed
#include config.h stuff from the above files.
Kent
|
|
were all the same and make sure all platforms see them.
Kent
|
|
This code allows you to load Quicktime images and movies as textures
and render animations to Quicktime movies.
Note that the selected output codec is *not* saved in the blendfile.
To enable Quicktime functionality you need the SDK from Apple:
OSX: ftp://ftp.apple.com/developer/Development_Kits/QT6SDK_Mac.hqx
Win: ftp://ftp.apple.com/developer/Development_Kits/QT6SDK_Win.hqx
Add the \QTDevWin\CIncludes and \QTDevWin\Libraries directories
from this SDK to your build environment.
Enable the WITH_QUICKTIME compile flag in the following directories:
bf\blender\source\blender\imbuf
bf\blender\source\blender\src
bf\blender\source\blender\render
bf\blender\source\creator
|
