Age | Commit message (Collapse) | Author |
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
|
|
* WITH_SYSTEM_OPENJPEG is removed and is now always on, this was already
the case for macOS and Windows.
* This should not break existing Linx builds. If there is no new enough
OpenJPEG installed, CMake will no find libopenjp2 and WITH_IMAGE_OPENJPEG
will be disabled.
* install_deps.sh was updated with new package names, since distributions
put this version in a new package.
Differential Revision: https://developer.blender.org/D3663
|
|
|
|
Patch porting to OpenJPEG 2.3 is by Campbell.
Once all platforms are upgraded we can remove the code for 1.5, and upgrade
or remove the openjpeg version from extern/. This intermediate step makes it
possible for platform maintainers to upgrade to 2.3 without breaking other
platforms.
|
|
|
|
|
|
|
|
This reverts commit f12204196fb1ee985ab9745cf9c70877601145f9.
Campbell, sorry. have to revert this for the time being.
We've missed some very important bits, such as:
- FFmpeg is usually linked against OpenJPEG
- OIIO needs OpenJPEG as well.
For FFmpeg issues we can either disable OpenJPEG there (since
we don't really use it), or bump FFmpeg to version 3.1.1 which
can use either of OpenJPEG 1.5 or 2.1.
For OIIO we do need OpenJPEG support (otherwise Cycles will
not be able to use j2k/j2c textures) and currently there is
NO solution to make OIIO working with OpenJPEG 2.1.
According to Matthias Fauconneau (aka mfv) Larry is working
on the patch to get OIIO work with OpenJPEG 2.1, but it'll
take some time still.
I've tried to look into support of some sort of build system
flag and do ifdefs, but it all becomes quite nasty, especially
with bundled OpenJPEG bumped to 2.1.
Surely such an update is something we'll have to apply to
but at this exact moment it causes quite some pain for all
developers.
Suggest to wait for until OIIO supports OpenJPEG 2.1 and then
go with the updates for real.
|
|
Stream handling has changed so this required changes to how files & memory are accessed.
|
|
|
|
Profile and color space were not properly set.
|
|
ImBuf types were getting stored as bitflags in a 32bit integer which had
already run out of space. Solved the problem by separating file type to
an ftype enum, and file specific options to foptions.
Reviewed by Campbell, thanks a lot!
|
|
|
|
|
|
|
|
|
|
|
|
16bit PNG and Jpeg2K exporters were not aware of the simple
fact that float buffer could have only 3 or 1 channels.
|
|
|
|
This codec is absolutely needed to generate DCP using OpenDCP,
before that external application to convert JP2 to J2K was used
which slowed down export a lot.
New codec is exposed to image format settings panel and called
Codec. Default one is JP2 which creates files with .jp2 extension,
new one is called J2K which creates with .j2c extension.
Other changes:
- Fixed avi jpeg warning which was treating as error here.
- Made it so extension is detecting from ImageFormatData instead
of image file type, which makes it possible to have different
extension for the same file type depending on it's settings.
IRIS format should still be changed (depending on number of
channels it'll be .bw, .rgb or .rgba extension)
- Default image format settings would be set from image buffer
when re-saving it. Makes it possible to easily open .j2c file
and save it using J2K codec (without this change it'll save as
.jp2 using JP2 codec)
|
|
also initialize bmesh-bevel settings struct to zero to avoid possible uninitialized memory later.
|
|
|
|
|
|
Color management would be applied on both of float and byte buffers on image
save in cases if file format doesn't require linear float buffer and if image
is saving as render result.
This solves both initial report issue and TODO marked in previous fix.
Also de-duplicated image buffer color managing code and gave some more
meaningful names for few functions. Also wrote documentation around this
function, so current assumptions about spaces should be clear enough.
Made regression tests by saving EXR/PNG images to all supported format and
rendering OpenGL/Normal animation, in all cases seems everything is fine,
but more tests for sure would be welcome.
|
|
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
|
|
- Add check for header field in BMP decoder. This is needed to distinguish
whether file is indeed BMP image or not.
Without this check Blender could easily crash when it'll try to load
non-BMP image.
Tested with files from own HDD, but all of them has got BM header field,
more testing would be welcome.
- Made Jpeg2000 aware of J2K codec. Originally was needed to verify .j2c
files here in the studio, but having support of this codec would be
nice in general.
Currently supports only reading in this codec, writing would still
using jp2 codec.
|
|
|
|
|
|
|
|
normalise->normalize).
|
|
|
|
|
|
- expand loops to avoid checks for each iteration
- use unsigned ints for looping over pixels
- use inline functions for color conversion
|
|
|
|
|
|
replace do prefix with do_ for bool vars.
|
|
|
|
|
|
|
|
|
|
else if's
|
|
Not all file formats/calls are supported yet. It will be expended.
Please from now on use BLI_fopen, BLI_* for file manipulations.
For non-windows systems BLI_fopen just calls fopen.
For Windows, the utf-8 string is translated to utf-16 string in order to call UTF version of the function.
|
|
|
|
|
|
warning.
|
|
|
|
(in keeping with most of blenders code)
also split some long lines in own code.
|
|
avoid confusion with ImageFormatData.depth
|