| Age | Commit message (Collapse) | Author |
|---|
|
Use IMB_testiffname to check whether file could be handled by ImBuf or
whether it should be handled by anim routines.
It solves the issue when file without extension is used for movie clip.
|
|
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
|
|
|
|
|
|
|
|
|
|
from David M (erwin94)
|
|
|
|
|
|
|
|
else if's
|
|
Not all file formats/calls are supported yet. It will be expended.
Please from now on use BLI_fopen, BLI_* for file manipulations.
For non-windows systems BLI_fopen just calls fopen.
For Windows, the utf-8 string is translated to utf-16 string in order to call UTF version of the function.
|
|
|
|
avoid confusion with ImageFormatData.depth
|
|
|
|
http://markmail.org/message/fp7ozcywxum3ar7n
|
|
|
|
only RNA access currently 'image.resolution'.
|
|
|
|
|
|
|
|
the PNG could not be saved it could leak memory and not close the file.
|
|
|
|
- removed deprecated bitmap arg from IMB_allocImBuf (plugins will need updating).
- mostly tagged UNUSED() since some of these functions look like they may need to have the arguments used later.
|
|
all image formats should be able to load files bigger then 2gig (when its supported)
|
|
- remove MEM_guardedalloc.h from header files (include directly)
|
|
faster for high resolution images - 2k.
|
|
tile cache code in imbuf, but it is not hooked up to the render engine.
Imbuf module: some small refactoring and removing a lot of unused or old code
(about 6.5k lines).
* Added a ImFileType struct with callbacks to make adding an file format type,
or making changes to the API easier.
* Move imbuf init/exit code into IMB_init()/IMB_exit() functions.
* Increased mipmap levels from 10 to 20, you run into this limit already with
a 2k image.
* Removed hamx, amiga, anim5 format support.
* Removed colormap saving, only simple colormap code now for reading tga.
* Removed gen_dynlibtiff.py, editing this is almost as much work as just
editing the code directly.
* Functions removed that were only used for sequencer plugin API:
IMB_anim_nextpic, IMB_clever_double, IMB_antialias, IMB_gamwarp,
IMB_scalefieldImBuf, IMB_scalefastfieldImBuf, IMB_onethird, IMB_halflace,
IMB_dit0, IMB_dit2, IMB_cspace
* Write metadata info into OpenEXR images. Can be viewed with the command
line utility 'exrheader'
For the image tile cache code, see this page:
http://wiki.blender.org/index.php/Dev:2.5/Source/Imaging/ImageTileCache
|
|
|
|
|
|
Now it's a bit more robust, tagging images with profiles when they're loaded,
which then get interpreted later on by conversion functions. Just Linear RGB
and sRGB profiles at the moment, same as before.
This commit fixes Martin's problem with EXRs and Multilayer images loading/
saving too dark, and it also makes the sequence editor work correctly with it too.
Also fixes:
[#19647] gamma correction with color management is reset when resetting Curve
[#19454] 2.5: Dither does not work when Color management is enabled
|
|
blocks that were previously missed; and b) greatly increase my
ohloh stats!
|
|
metadata and optionally
draws into the
frame.
This patch includes some changes I made...
* use blenders bitmap fonts (rather then own fonts)
* select font size
* user interface layout changes
* Marker as another image stamp option
Also added some new API calls
BMF_GetFontHeight(font);
BMF_DrawStringBuf(...); - so we can draw text into an imbuf's image buffer.
get_frame_marker(frame) - get the last marker from the frame.
IMB_rectfill_area(...) - fill in an image buffer with a rectangle area of color.
TODO - draw stamp info in 3d view, at the moment it just displays in the animation.
|
|
Initial commit of imagebrowser in trunk.
BIG COMMIT!
Main changes:
* completely reworked imasel space
* creation and storage of the preview images for materials, textures, world and lamp
* thumbnails of images and movie files when browsing in the file system
* loading previews from external .blend when linking or appending
* thumbnail caching according to the Thumbnail Managing Standard: http://jens.triq.net/thumbnail-spec/
* for now just kept imasel access mostly as old imgbrowser (CTRL+F4, CTRL+F1) a bit hidden still.
* filtering of file types (images, movies, .blend, py,...)
* preliminary managing of bookmarks ('B' button to add, XKEY while bookmark active to delete)
More detailed info which will be updated here: http://wiki.blender.org/index.php/User:Elubie/PreviewImageBrowser
Places that need special review (and probably fixes):
* BLO_blendhandle_get_previews in readblenentry
* readfile.c: do_version and refactorings of do_library_append
* UI integration
TODO and known issues still:
* Accented characters do not display correctly with international fonts
* Crash was reported when browsing in directory with movie files
* Bookmark management still needs some UI work (second scrollbar?), feedback here is welcome!
Credits:
Samir Bharadwaj (samirbharadwaj@yahoo.com) for the icon images.
Many thanks to everyone who gave feedback and helped so far!
|
|
|
|
NOTE: BLI_winstuff.h was meant to be a wrapper around windows.h to handle
undefining various crap that windows.h defines. Platform specific headers
should only have to be included in a few places. This reduces the number
of inclusions of BLI_winstuff.h to 16 which is a much more reasonable
number (than the 144 or whatever it used to be)
|
|
I standarized the returns on a failed opening of the output file for
the above image formats.
I also cleaned up a couple of warnings.
Kent
|
|
I just fixed indentation (replaced spaces with tabs where needed) and removed
#include config.h stuff from the above files.
Kent
|
|
It moves targa, bmp, iris and png loading so that were not opening
2 file handles for each file, and made them like the jpeg stuff.
Also cleaned up some minor other stuff.
Kent
|
|
Summary: standardized imageformat functions(make function names similar, and
parameters in same order where relavant), small code cleanups, and
added a description of how to add an image format to blender.
Kent
Specifics:
merged png_decode.c and png_encode.c to png.c and cleaned function calls.
fixed some spacing in IMB_imbuf_types.h
casting cleanups:
intern/amiga.c
intern/ham.c
intern/iris.c
Modified switch statements to have a default type to insure values are set:
intern/antialias.c
Initalization of some vars and make types similar.
intern/bitplanes.c
cleaned function calls, and changed if else to if's with return:
intern/jpeg.c
added {}'s in multidemensional arrays.
intern/matrix.h
Made a little cleaner to read, and matched above changes.
intern/readimage.c
intern/writeimage.c
|
